Demonstration Videos
View Demonstration Video
/ "The Future of
Vault Dewatering"
View Vault Maintenance System Training Video
TSSRemoval 99.4%
Oil & Grease Non-Detect
Filters out oil, oil sheen, oil-borne contaminants, and suspended solids as fine as rust! Configured as a portable, easy-to-use multi-layered filter sock.
The Absorb-it product list follows on the next two pages.
To return to the web site, use the BACK Arrow key.
Adsorb-it Sorbent Products
Remove Oil, Oil Sheen, Oil-Borne Contaminants from Water
Reusable Products. Made From Cloth Waste. Used to Clean the Environment.
Ultimately a Fuel Source. " It doesn't get any greener than that! "
A heavy duty double-layered sock from Adsorb-it Filtration Fabric for filtering silt, oil and oil sheen, or contaminants when flushing pipes, draining excavations, or underground vaults. Four standard sizes in stock. It can be made in any size for your individual needs.
/ Item #ETC10-5
Control oil and sheen in ditches and piping. Ideal size for zipper drains. Adsorb-it® Filtration Fabric encloses a 3” dia. by 5’ long flotation boom with a double layer of 9” long tendrils down each side with a webbing loop at each end and a clip for hooking multiple units together. Webbing runs the full length of the centipede for added strength.
/ Item #EHB19-5, Item #EHB22-10
Control oil and sheen in sumps and catch basins.
A double layer of Adsorb-it® Filtration Fabric on a 3” dia. by 5’ long flotation boom with tendrils reaching 19” deep. The velcro and grommets at each end allow you to form the Hula Bug into a circle, or hook multiple units together for other applications.
Also available in a 10' long unit with a 5" diameter flotation boom and 22" long tendrils.
/ Item #EFB21-10
Adsorb-it fabric floating curtain boom 21" deep by 10' long. For use on any body of water to remove oil and oil sheen from the surface and subsurface. Hook units together to make any length.
/ Item #MSG5-10
The “Surfer” is designed for use in turbulent water and light surf to protect shorelines by capturing and retaining released oils, oil sheen and oil-borne contaminants. They can be interconnected and towed through a release to remove the oil and oil sheen.
/ Item #MBC15-10
A 15" deep by 10' long Adsorb-it fabric loop designed to be attached to floating docks, barges, boat lifts, rafts, fence boom, and a variety of other floating media for the on-going removal of oils, oil sheen and oil-borne contaminants that have been released to the water.
/ Item #EDB24-5
Adsorb-it fabric curtain boom 24" deep by 5' long, for quick deployment in small waterways and ditches. It has a 3" flotation boom in head, and ballast chain in the bottom to allow it to conform to the shape of the bottom of the ditch or waterway.
/ Item #MOS12-30, #HOS-24, #HSH-60F
Mop up an oil or fuel spill on boat decks, in the shop, garage, or warehouse. Use the Oil Sweep any place that would normally require hands-and-knees placement and removal of sorbent pads. The complete unit is comprised of three parts: the Oil Sweep Cover, the Standard Frame, and the Fiberglas Handle.
Uncut Adsorb-it Fabric
/ Item #AF11-2, #AF11-5
Adsorb-it fabric is made with X-Tex 100% recycled select fibers from the textile industry; designed with the unique ability to allow the virtually unrestricted flow of salt or fresh water through the fabric at rates in excess of 100 gallons per minute per square foot while retaining oils, oil sheen, and oil-borne contaminants in the fabric matrix. Available in 250' rolls 2' wide and 5' wide.
For additional information on the Adsorb-it line of oil removal products – including a formal quotation on any of the items -- contact us via our Contact Us page on this website.