/ Revision: Number: 1110
Date: 08/2007 /
Repair and
Modification of
Printed Boards and
Electronic Assemblies /
RFQ Information Document
Information needed for Design, Setup and Tooling. / IPC Product Class: R, F, C
Skill Level: Novice
Level of Conformance: High

FAST RESPONSE PROCESS

1 / Quote and Design Specification Report (DSR) / 2 / ACM Design, Setup, and Tooling / 3 / Additive Processes Printed Circuit Boards with ACM

CHECKLISTS

The RFQ Checklist is used to prepare the needed information to obtain a quote for additive circuit modification, ACM services. With this minimal amount of information, Additive can rapidly respond with a quotation for your application. The object is to provide the greatest value from the ACM service you receive.

Board Part Number that appears on PCB / PN:
Application Type / ___ NPI/Prototype Quantity # ___
___ Low Volume Prod. Lot Qty # ___
___ Med/High Vol. Prod. Total Qty # ___
Lot Size ___
Number of added Traces (Jumpers)
Number of Added Components Pads
Number of Etch Cuts, Trace Cuts, or Drill-outs
Quantity of Lifted or Clipped Component Leads
Visual Representation of Rework
PCB Dimensions X and Y, Thickness / ____X” x ____Y” x ____”Thick
Is the Board Panelized / __1-Up, __ 2-up, __3-up, ___-up
PCB Technology: / __ SMT, __ Fine Pitch (<.018”)
__Through Hole
__ HASL, __ SMOBC
__OSP, __ Gold Immersion
Solder Paste / __ Lead, __ No-lead
If no-lead specify paste required
Where are PCB located?
EMS Provider
Name: Design/ Engineering/ Technical Contact
Telephone
Email

The Design Checklist is used to produce the ACM design, setup, and tooling. Applications Engineering will need the information listed below to layout the application. In most cases the required electronic files can be sent using email attachments. Additive does not need the entire board design file but a selected set of files listed.

Gerber Data Base to include the following: / _ Signal Files: Top, Bottom, & Inner Trace Layers
_ Power and Ground Layers
_ Silk-screen Nomenclature: Top & Bottom
_ Aperture List
ECO or other form of Written Rework Instruction /
Bare PCB (to assist in pad measurements) / Optional
Added Component Pad Specifications / Pad Dimensions and Spacing, if added
Name: Design/ Engineer/ Technical Contact
Telephone
email
Name: Person Approving Design
Telephone
email

PROCEDURES

(1) Quotation

  1. Contact (North America) and supply the information in the RFQ Checklist.
  2. A Quotation will be rapidly returned via email, facsimile, or whatever means specified.

(2) Design Initiation

  1. Quotation review and acceptance.
  2. Open required purchase order for work requested.
  3. Supply Additive Application Engineers () the information in the Design Checklist by email.
  4. Review and approve ACM design.

(3) Production Release

  1. Schedule PCB’s to Additive and communicate production schedule need.

QUOTATION AND DESIGN CONTACTS

Quotation Assistance: (North America)

Telephone: (603) 366-1578 (North America)



Page 2 of 2 Ó Additive 2007