Engr. MUSA, Adekunle Ibrahim
Mechanical Engineering Department,
Moshood Abiola Polytechnic,
P.M.B 2210, Abeokuta, 110001, Nigeria.
E-mail - , Tel no: - + (234) 8035050573
+ (234) 8051494902
EDUCATION:
Federal University of Agriculture, Abeokuta
- Doctor of Philosophy (Ph.D) - Industrial Engineering – Expected date - 2014
Thesis: Exergy Analysis of Human Physiological Response to Outdoor Conditions
during Block-laying.
Advisors: Dr S.O Ismaila, Ph.D., Prof M.A Waheed, Dr T.M.A Olayanju Ph.D.
Federal University of Agriculture, Abeokuta
- Master of Engineering (M.Eng) - Mechanical Engineering - 18th November, 2011
Dissertation: Ergo-Analysis and Design of Tables and Chairs for use in Tertiary
Institution in Abeokuta, Nigeria.
Advisors: Dr S.O Ismaila, Ph.D., Prof S.B Adejuyigbe, Dr O.D Akinyemi Ph.D.
CGPA: 66%
- Certificate in Computer Study - October, 2000
Ekiti State University, Ado-Ekiti (formally University of Ado-Ekiti & Ondo State University)
- Bachelor of Engineering (B.Eng)–Mechanical Engineering – 28th May,1997
Dissertation: Design of a Solar – Operated Absorption Air Conditioning System.
Advisor: Prof S.B Adeyemo.
CGPA: 3.08
African Church Grammar School, Abeokuta
- West African School Certificate O/L - October,1988
PROFESSIONAL, GRANTS/SCHOLARSHIP, COMMENDATION(S)/RECOGNITION
· TETFund (ETF) Grant to attend ICME 2012 (WCE 2012) in London, U.K -2012
· Distinguish Service Award, Rotaract Club of FCE Osiele, Abeokuta, -2011
· Education Trust Fund (ETF) Grant for pursuit of Master of Engineering (M.Eng) -2010
· Meritorious Service Award, Nigerian Society of Engineers, Abeokuta Branch -2010
· Service Award, Nigerian Society of Engineers, Abeokuta Branch -2007
· Outstanding Performance/Meritorious Services - Director, Works & Services -2007
· High Degree of Professional Competence - HOD, Animal Physiology, FUNAAB - 2007
· Deep Appreciation for promptness of duty - Vice Chancellor, FUNAAB - 2007
TEACHING EXPERIENCE
i) Mechanical Engineering Department,
Moshood Abiola Polytechnic
PMB 2210, Abeokuta, Ogun State as Lecturer III - 2009 to date
Courses Taught / date:
- Building Services and Equipment (ARC 227) —2009 to date
- Engineering Measurement (MEC127) -- 2009 to date
- Safety (MEC129) -- 2009 to 2010
- Computer Aided Design and Drafting (MEC 201)–2009 to date
- Plant Services and Maintenance (MCE 220) -- 2009 to date
- Fluid Mechanics (MCE 217) --2011 to date
ii) Pre-Degree Programme
Centre for Human Resources Development.
Federal University of Agriculture, Abeokuta, Demonstrator (Physics) --2002 to 2007
iii) West African Examination Council
Yaba Lagos. Assistant Examiner (Physics) --2000 to date
PROFESSIONAL EXPERIENCE
i) Works & Services Department
Federal University of Agriculture
Abeokuta, Ogun State as Engineer (Mechanical) II 2001 to 2005
Engineer (Mechanical) I 2005 to 2009
Designation: Head, Mechanical Maintenance Engineering Unit (2001-2008)
ii) Ministry of Works & Transports
Dutse, Jigawa State Mechanical Engineer (NYSC) --1997 to 1998
PROFESSIONAL AFFLIATIONS
- Member, The International Association of Engineers (IAENG)
- Member, The Nigerian Society of Engineers (NSE)
- Member, Council for the Registration of Engineering in Nigeria (COREN)
- Member, The Nigerian Institution of Mechanical Engineers (NIMechE)
CIVIC, PROFESSIONAL & RECOGNITION APPOINTMENTS
SERVICE ACTIVITIES AT THE MOSHOOD ABIOLA POLYTECHNIC, ABEOKUTA
- Coordinator,2009 & 2012 Accreditation Matters for Mechanical Engineering Department
- Chairman, Staff training and development for the departmental staffs -- 2009 to date
- Chairman, Students Project Supervisory Committee -- 2009 to date
- Staff Adviser, National Polytechnic Engineering Students (NAPES) -- 2011 to date
SERVICE ACTIVITIES AT THE FEDERAL UNIVERSITY OF AGRICULTURE, ABEOKUTA
- Staff Adviser, Rotaract Club of FUNAAB -- 2001 to 2006
- Staff Adviser, Man`O War Club, FUNAAB -- 2003 to 2008
- Member, Publication/Editorial Board Comm. SSANU, FUNAAB –2005 to 2008
- Member, Board of Trustee, SSANU Investment Scheme –2007 to 2009
- Adviser, Drivers & Tractor mate Operators, FUNAAB Unit -2007 to 2009
SERVICES TO PROFESSIONAL BODIES
A) INTERNATIONAL ASSOCIATION OF ENGINEERS (IAENG)
- Reviewer Board Member, The International Conference of Mechanical Engineering
(ICME) for World Congress on Engineering (WCE) - 2011 to date
B) NIGERIAN SOCIETY OF ENGINEERS (National & Local)
- Member, Certificates Verification Committee --2008
- Member, Prevention, Investigation & Failure Analysis Committee --2008
- Assistant Gen Secretary, NSE Abeokuta Branch --2005 to 2009
- Assistant Gen Secretary APBN, Ogun State Chapter --2006 to 2008
- Member, Central Local Organizing Committee for AGM --2006
- Secretary, Industrial visit/Exhibition Subcommittee for AGM –2006
- Member, Student nite Subcommittee for AGM --2006
- Member, Registration Subcommittee for AGM --2006
- Member, Membership / Welfare Committee -2002 to 2005
SERVICE ACTIVITIES AT THE ALUMNI ASSOCIATION
- National Treasurer, University of Ado- Ekiti, Nigeria -- 2007 to 2010
- Gen Secretary University Ado- Ekiti, Ogun State Chapter --2005 to 2010
- Asst Gen Secretary, University of Ado-Ekiti, Ogun State Chapter – 2002 to 2005
SERVICE ACTIVITIES TO THE FEDERAL REPUBLIC OF NIGERIA
- Member, Presidential Committee on the Review of 1999 Constitution
Representing Abeokuta North Local Government --Oct 2000 –Feb 2001
- Member, Board of Governors, Ebenezer Grammar School, Abeokuta --Nov,2011 to date
PUBLICATIONS
A) Published Refereed Conference Proceedings in Nigeria
1. Adekitan O., Oyerinde, A.O., Musa, A.I., (2010a) –“Moderation of Admission Standard in the Nigerian Polytechnic - An Alternative to Enhance Quality of graduates”. Book of Abstracts of the 9th ASUP National Conference on 27th-29th September 2010 at Rufus Giwa Polytechnic, Owo, Ondo State, Pp. 25-26.
2. Musa, A.I., Oyerinde, A.O., Adekitan, O (2010b) – “Air pollution and Global Warming: The Health damage and Energy Needs perspectives”, Proceedings of the 6th Engineering forum, School of Engineering, Federal Polytechnic, Ado-Ekiti on 4th-7th October,2010, Pp-94-102
3. Musa, A.I., (2010c).,”Climate change and Flooding, The cases of the Creek Region”, Proceedings of the 6th Engineering forum, School of Engineering, Federal Polytechnic, Ado-Ekiti on 4th-7th October,2010, Pp-103-108
4. Musa, A.I.,(2010d) -“Vocational Technical Education And Economic Development –The Nigeria Experience” Proceedings of the 23rd International conference/AGM, The Nigerian Institution of Mechanical Engineers (NIMechE), Port Harcourt, River State October,2010, Pp104-108.
5. Musa, A.I., (2010e).,”Admission Standardization in the Nigerian Tertiary Institutions - An Ego-Enhancing Drive for Quality Graduates”, Book of Abstracts of the 1st National Engineering Conference, School of Engineering, Federal Polytechnic, Ilaro, Ogun State November,2010, Pp. 6.
6. Abatan T.T., Abiola K.O., Abatan O.I., Onalaja O.A., Musa, A.I., (2010f).,”ICT A tool in Effective Implementation of Curriculum Delivery in Technological Education”, Book of Abstracts of the 1st National Engineering Conference, School of Engineering, Federal Polytechnic, Ilaro, Ogun State November,2010, Pp. 10.
7. Musa, A.I., (2010g).,”Economic impact of climate change on sectorial growth in Nigeria”, Book of Abstracts of the 3rd National Conference, School of Environmental studies, Federal Polytechnic, Ilaro, Ogun State, November,2010, Pp. 8.
8. Otulana, J.O., Musa, A.I., Adeleke, M.B.,(2011a).,”Examination Malpractices: An Hurdles in Realization of Millennium Development Goals (MDGs)”, Book of Abstracts of the 1st National Conference, School of Environmental Studies, The Polytechnic, Ibadan, Oyo State, March, 2011, Pp. 2.
9. Musa, A.I., Otulana, J.O., Adeleke, M.B.,(2011b)., “Climate Change And Regional Sustainable Development: The Economic Impact”, Book of Abstracts of the 2nd Joint International Conference of University of Ilorin, Nigeria and University of Cape-Coast, Ghana, May 1st – 5th 2011, Pp. 135
B) Published Refereed International Conference Proceedings (Foreign)
1. Musa, A.I., Ismaila, S.O., Adejuyigbe S.B., Akinyemi O.D.,(2011a),“Ergonomic Evaluation and Design of Tables and Chairs for Use in Tertiary Institutions in Nigeria” Proceedings of the 10th International Symposium on Human Factors and Organization Design and Management (Odam 2011) on 4th – 6th April, 2011, Rhodes University, Grahamstown, South Africa, Vol. II, Pp. 201-206, ISBN 0-9768143 - 4 – X.
2. Ismaila, S.O., Akanbi, O.G., Daniel, O.I., Musa, A.I & Sanusi, H.O., (2011b)
“Ergonomic Evaluation of Welding Workplace” Proceedings of the 10th International Symposium on Human Factors and Organization Design and Management (Odam 2011) on 4th – 6thApril, 2011, Rhodes University, Grahamstown, South Africa, Vol. I, Pp. 401-406, ISBN 0-9768143 - 4 – X.
3. Musa, A.I., (2012a),“Effect of Carbon Dioxide Emission to Vehicular Traffic and Environment in Ogun State, Nigeria” Proceedings of the world Congress on Engineering 2012 (WCE 2012) on 4th – 6th July, 2012, Imperial College, London, U.K Vol. III, Pp. 1701-1704, ISBN 978-988-19252-2-0, ISSN: 2078-0958(print),ISSN: 2078-0966(online).
4. Musa, A.I., (2012b),“Mechanical-Assessment of Locally Fabricated Portable Generators for Production of Acetylene Gas in Abeokuta, Nigeria” Proceedings of the world Congress on Engineering 2012 (WCE 2012) on 4th – 6th July, 2012, Imperial College, London, U.K Vol. III, Pp. 1884-1888, ISBN 978-988-19252-2-0, ISSN: 2078-0958(print),ISSN: 2078-0966(online).
C) Published Referred journals
1. Adekitan O., Oyerinde, A.O., Musa, A.I., (2010) “Community Participation in Urban Water Supply Management in Abeokuta - Lessons For Sustainable Water Supply In Urban Communities “Journal of Environmental Sciences and Resource Management, Volume 2, September 2010.Pp 95-108. www.cenresin.org.
2. Musa, A.I., Ismaila, S.O., Adejuyigbe S.B., & Akinyemi, O.D., (2011),“Ergo-Effects of Designed School Furniture and Sitting Positions on Students Behaviour and Musculo-Skeletal Disorder in Nigerian tertiary institutions”, Management Science Letters, doi.10.5267 / j.msl 2011.03.002.Vol 1(2011), Pp. 331-334 www.growingscience.com/msl.
3. Musa, A.I.,(2011),“Anthropometric Evaluation and Assessment of School Furniture design in Nigerian, a case study of Secondary Schools in rural area of Odeda, Ogun State, Nigeria”, International journal of Industrial Engineering Computation (IJIEC) , doi.10.5267 / j.ijiec 2011.03.006. Vol, 2, Issue 3 (2011) Pp. 499-508. www.growingscience.com/ijiec, www.doaj.org/doaj, ISSN: 19232926.
4. Musa, A.I., (2011)., “Estimation And Evaluation of Shift Work as Risk Factors for Occupational Injury (A Case Study Of Shift Work and Extended Working Hours In West African Portland Cement Company (WAPCO) Plc., Ewekoro, Ogun State, Nigeria)”, Theoretical Issues in Ergonomics Science, ISSN 1463-922X Print, DOI:10.1080/ 1463922X. 2011.611271. www.informaworld.com (Taylor and Francis series)
5. Musa, A.I., Ismaila, S.O., (2011), “Student Anthropometric Data and Furniture Mismatches in Selected Institutions in Abeokuta, Ogun State, Nigeria”, Theoretical Issues in Ergonomics Science, ISSN 1463-922X Print, DOI:10.1080/1463922X. 2011.611272. www.informaworld.com (Taylor and Francis series).
6. Musa, A.I., Ismaila, S.O., Adejuyigbe S.B., Akinyemi, O.D., & Abolarin., M.S (2012),“Comparison of biomechanical and anthropometrical data of Nigerian tertiary institution students with some selected countries”, Management Science Letters, doi.10.5267 /j.msl 2012.06.035.Vol 2(2012), Pp. 1885-1894 www.growingscience.com/msl.
RESEARCH INTEREST:
· Industrial, Maintenance and Safety Engineering
· Ergonomic and Human Factor
· Energy, Environmental and Climatic Change
· Computer Aided Design(CAD)
REFEREES
i) Dr (Engr) O.S Olokode ii) Dr (Engr) S.O Ismaila
HOD, Mechanical Engineering, Dept Mechanical Engineering Department
Federal University of Agriculture Federal University of Agriculture
Abeokuta Abeokuta
iii) Engr. M.B Adeleke iv) Dr (Engr) O.S Awokola
HOD, Mechanical Engineering Dept Civil Engineering Department
Moshood Abiola Polytechnic Federal University of Agriculture
Abeokuta, Ogun State Abeokuta
1