SECTION 10825

SLIDING SHOWER DOOR AND PANEL

ARCHITETURAL CONCEPTS NEWPORT SERIES BARN DOOR SHOWER ENCLOSURE

A.RELATED DOCUMENTS

1.Drawings, General Conditions and Division 1 Specification Sections apply to this Section.

B.WORK INCLUDED

  1. As part of Bidding, General Conditions require field investigation of existing conditions as related to Work of this Section.
  2. The Contract Drawings and Keynotes delineate the type and extent of the Work for this Project.
  3. The work of this Section includes, but is not necessarily limited to, the following principal items of Work:
  1. Furnish and install custom glass shower door and hardware in bathroom as specified and indicated on Drawings and in Keynotes.

C.SUBMITTALS

1.Product Data: Technical literature with installation and storage instructions.

2.Samples: If requested by Owner, Architect or Designer.

D.PACKAGING, DELIVERY, STORAGE AND HANDLING

  1. Materials shall be packed, unloaded, stored and protected to avoid abuse, damage and defacement.

E.GLASS SHOWER DOOR AND PANELS

  1. Materials:
  1. Glazing: Tempered 3/8”, clear glass door and side panel conforming to CPSC Standard 16 CFC 1201.
  2. Bottom Channel: Extruded aluminum 6463-T5 alloy with AA-M22C31A21l, buffed clear bright anodized finish.
  3. Seals around fixed glass and shower door are clear polycarbonate vinyl.
  4. Door hardware and clear polycarbonate vinyl seals:

1)Overhead Track Model AC Barn Door Shower Enclosures

  1. Newport Series

2)4sliding rollers (active panel) Newport Series

3)12” Back to Back PullACMO6312

4)Sliding door guideModel No ACFGGL

5)Bottom U Channel Model No. ACSDCD38A- Bright Aluminum

  1. Use clear sanitary sealant specified in Section 07900.
  2. Fasteners: Stainless steel.
  1. Manufacturer:
  1. Glass, Hardware and vinyl seals shall be purchased from Architectural Concepts– (720) 259-5358.
  2. For Project pricing, contact Architectural Concepts (720) 259-5358 Scott Colby

F.FABRICATION

1.All units are standard sized with door opening being 28” 30” wide with a max width of 32”. Max height of glass is 78” above shower pan curb.

2.Exposed work shall be carefully matched to produce continuity of line and design. Joints in exposed metal work, unless otherwise shown or specified, shall be accurately fitted and rigidly secured with hairline contacts.

G.INSTALLATION

1.Coordinate work with that of other trades; report errors, omissions and inconsistencies. Promptly furnish items to be placed during installation of other work. Drawings shall be provided for proper location of these items.

2.Follow manufacturer’s requirements for install.

H.PROTECTION

1.Cover work and protect against damage, including subsequent building construction, until acceptance by Marriott Representative.

END OF SECTION

AC-201710825-1Barn Door Shower Guide Specs