Emergency Gas Shutoff Systems and Hazardous Gas Detectors

Page 1

Emergency Gas Shutoff Systems and Hazardous Gas Detectors

Halogen is the leading manufacturer of Emergency Gas Shutoff Systems.
Our battery-powered Actuators mount easily with no special tools
All Fire Codes authorize gas shutoff systems to replace gas scrubbers.
The Gas Detectors accurately provide emergency shutoff activation.

Page 2

Product Information

Ton Container

Shutoff System:

Eclipse Actuators

150 lbs. Cylinder

Shutoff Systems:

Eclipse Actuator

Terminators Actuator

Gas Detectors:

Jupiter Gas Detector System

Satellite Gas Detector

24 VDC Power Supply

Page 4

150 lbs. Cylinder

Shutoff Systems

Eclipse Actuators:

Provides indication of closure and accurate valve closing torque
All metal housing design and electrical gear-driven closing unit
Three year Warranty

Terminator Actuators:

Low cost gas shutoff system with optional closing indicator.
Strong plastic alloy enclosure and electric impact closing unit
One year Warranty

Page 5

Eclipse Actuator

The medium weight Eclipse Actuators (10 lbs.) are easily installed on 150 lb cylinders with no special tools required. The mounting clamp attaches directly to the standard yoke assemble. (See:Typical Actuator Mounting tab above)

The actuator may be integrated with the valve mounted vacuum regulator to give added safety against valve gasket or packing leaks.

Technical Specifications are available by pressing the tab above. Word copies of the specifications mayalso be obtained by contacting your local representative or by a request using the “Contact Us”button. Additional features are explained in the Safety Featuressection available by pressing the tab above.

Page 6

Terminator Actuator

The light weight Terminator Actuators (8 lbs.) are easily installed on 150 lb cylinders with no special tools required. The actuator mounts directly to the cylinder valve by just putting the drive bushing directly on the valve stem and placing the two extensions on either side of the valve nozzle. (See: Typical Actuator Mounting tab above)

The actuator may be integrated with the valve mounted vacuum regulator to give added safety against valve gasket or packing leaks.

Technical Specifications are available by pressing the tab above. Word copies of the specifications may also be obtained by contacting your local representative or by a request using the “Contact Us” button. Additional features are explained in the Safety Features section available by pressing the tab above.

Page 7

Ton Container Shutoff Systems

ECLIPSE ACTUATORS

Closes valve in less than one second.
Mounting clamp fits standard valve and hardware.
Through-shaft design enables manual operation at all times.
One-way clutch insures power-to-close only.
Applies Chlorine Institute recommended torque.
Three Year Factory Warranty

The medium weight Eclipse Actuators (10 lbs.) are easily installed on ton containers with no special tools required. The mounting clamp attaches directly to the standard yoke assemble. (See: Typical Actuator Mounting tab above)

Technical Specifications are available by pressing the tab above. Word copies of the specifications may also be obtained by contacting your local representative or by a request using the “Contact Us” button. Additional features are explained in the Safety Features section available by pressing the tab above.

Page 8