Connecting to State of Indiana Secured Wireless

For State Employees Only using Microsoft Windows XP

If you are a state employee with a laptop that has wireless capabilities, you may access the secured wireless network in the conference center by following this procedure prior to your meeting.

Hardware Requirements: Intel PROSet Wireless Adapter or similar wireless adapter that will support the following specifications:

  • Authentication: WPA2-Enterprise with EAP-FAST
  • Encryption: AES or AES-CCMP

If you meet the hardware requirements stated above, your user account must be configured to allow you to access the wireless network.

Please contact your agency security coordinator to put in a helpdesk ticket. The coordinator should ask to have your user account “set as a member of your domain’s wireless group and have your remote dial-in permission set to allow”.

Once your account setup is complete, you then need to configure your wireless software. If you have the INTEL PROSet Wireless Hardware (versions 2200, 2915, 3945, 4965, and WiFi Link 5100 and 5300), you may obtain the wireless software from

Click on Wireless > Intel > Installation Packages and click on the appropriate group for your agency:

  • DCS: dcs-wlan-package
  • INDOT: indot-wlan-package
  • ISP: isp-wlan-package
  • IOT: iot-wlan-package
  • Others: soi-wlan-package

When prompted, click Run. Then click on Run again:

Click OK on the restart warning:

Your machine will run the software and automatically reboot. DO NOT TOUCH YOUR MACHINE DURING THIS PROCESS.

After reboot, your machine may try to log you into the domain using the wireless adapter. If it does, you may be prompted to accept a PAC. Click yes when prompted.

If your machine does not log you into the domain using wireless, you may log into the wireless network using the procedure below.

Double-click the icon in the system tray near your clock for the INTEL PROSet Wireless Adapter to open the application. The icon will look similar to and may be different colors or have a red X in it.

Click the wireless profile for your agency and then click Connect. In the image below, the profile is named SOI-012909.

Continued on next page

You will be prompted to accept a PAC. Click Yes

You will then be connected to the wireless network and you may close the wireless application by either clicking the Close button or by clicking the X in the upper right hand corner of the application window.