Capital Improvement Plan Data Sheet

CIP DATA SHEET.INSTRUCTIONS FOR COMPLETING.CAPITAL IMPROVEMENT PLAN.A Capital Improvement Plan (CIP) Data Sheet must be submitted for each major work item that is requesting Federal assistance over the next 3 years. If required, evidence of State and

Houston Planning Commission

Houston Planning Commission.An applicant seeking a variance and/or special exception to the Planning Standards of Chapter 42 of the City of Houston s Code of Ordinances must complete the following application and submit an electronic copy of the Microsoft

Asphaltic Concrete Paving for Play Courts and Tracks

Specifier leave this line)) SBBC Design & Material Standards, January 01, 2010 Edition.ASPHALTIC CONCRETE PAVING FOR PLAY COURTS AND TRACKS.1.1 SECTION INCLUDES.A. Asphaltic Concrete Paving for Playcourts, Tennis Courts and Tracks.B. Surface Sealer.C. Wearing Binder or Base Course

Specifications Unit Pavers

Navascape Products MasterFormat Specifications.Section 32 14 13.13 Interlocking Concrete Unit Paving.Note: This is a guide specification for concrete paver applications using concrete pavers and bedding sand over a compacted aggregate base for pedestrian

Association of Asphalt Paving Technologists

ASSOCIATION OF ASPHALT PAVING TECHNOLOGISTS.Annual Meeting and Technical Sessions March 13-16, 2016.The Westin Indianapolis, Indianapolis, IN.PRE-REGISTRATION INFORMATION.A separate registration form for each attendee should be completed and returned

32 14 13 - Interlocking Concrete Paving Stones

Use this Section to specify requirements for Interlocking Concrete Paving Stones laid on a sand and granular base with polymeric sand filled joints.This Master Specification Section contains.1 This Cover Sheet.2 Specification Section Text.1.1 Related Requirements.1.2 Reference Documents

Portland Cement Concrete Paving

Portland Cement Concrete Paving.In Company With.Generally describe the paving operation (i.e. reinforcement or non, fixed or slip form, weather, joint assembly, etc.).Before the Pour.1. Has the inspection staff scratch-boarded or stringlined between forms and/or across the grade?

Use with 2006 Standards

USE WITH 2006 STANDARDS.Use with SSP 51555 Structure Approach Slab (TypeR) when a paving notch extension is shown on plans.101.__PAVING NOTCH EXTENSION.This work shall consist of extending existing paving notches in conformance with the details shown on the plans and these special provisions

Quadrelec SF 254 and 255

Architect-Engineer.Questionnaire for.Specific Project.NSN 7540-01-152-8073 255-104 STANDARD FORM 255 (REV. 11-92).Previous edition not usable. Prescribed by GSA FAR (48 CFR) 53.236-2(c).Architect-Engineer.STANDARD FORM 255 PAGE 2 (REV. 11-92).STANDARD FORM 255 PAGE 4 (REV. 11-92)

Global Relevance of IEC Standards

U. S. NATIONAL COMMITTEE RECOMMENDATIONS TO IEC COMMITTEE.OF ACTION ON IMPLEMENTATION OF CB/151/R.GLOBAL RELEVANCE OF IEC STANDARDS.CB approved the recommendations of the Global Relevance Task Force (GRTF) and requested the CA to develop an implementation procedure (2001-02-14).GRTF Recommendations

VA Financial Services Center

Centralized Construction Payments User s Guide.VA Financial Services Center.Centralized Construction Payments.The Centralized Construction Payment process works in cooperation with the Online Certification System (OLCS). The Financial Services Center

Concrete Encased Duct Banks and Manholes

NL Master Specification Guide.for Public Funded Buildings.Issued 2008/03/18 Section 33 65 73 - Concrete Encased Duct Banks and Manholes Page 1 of 7.1.1 RELATED SECTIONS.1 Section 01 33 00 - Submittal Procedures.2 Section 01 74 21 Construction/Demolition Waste Management and Disposal

Steeltec Standard Canopy Specifications

STEELTEC STANDARD CANOPY SPECIFICATIONS.A. Steeltec shall furnish (and install if required) steel canopy system. Product shall be shipped ready for erection, with all required hardware

Aluminum Clad Ultimate Double Hung Next Generation 2.0

1.1 Section Includes.A. Aluminum Clad Wood Ultimate Double Hung Next Generation 2.0, Single Hung, Transom, Picture window complete with hardware, glazing, certified mulls, weather strip, insect screen, grilles-between-the-glass, simulated divided lite

Owner S Project Requirements Document for LEED Fundamental Commissioning

Owner s Project Requirements Document for LEED Fundamental Commissioning.Name Owner s Representative Date.Name Design Agent s Representative Date.Overview and Instructions.The purpose of this document is to provide clear and concise documentation of the

22884 Cut Aluminium Extrusions for the Manufacture of Aluminium Joinery Products

Explanatory notes.1 Legislation relevant to this unit standard includes Building Act 2004, Health and Safety in Employment Act 1992, and Resource Management Act 1991.Company procedures the documents and procedures that include company rules, codes and