Subject: Trial Blends Graph for Qpro Or Lotus?

SUPERPAVE Digest 9

Topics covered in this issue include:

3) Trial Blends Graph for Qpro or Lotus?

by

Date: Tue, 07 Jan 97 15:33:23 +0100

From:

To: "SuperPave Listserver " <>

Subject: Trial Blends Graph for Qpro or Lotus?

I want to plot the %passing vs sieve size in milli-meters raised to the

0.45 power in a qpro or lotus spreadsheet. The problem is that the

x-axis grid line intervals are uniform. It should look something like

a log-scale.

I have done it in SAS but would rather use a pc spreadsheet.

Please email me a copy if you have accomplished this in qpro or lotus.

TIA

------

Kenneth Hobson email:

Associate Engineer home:

Materials Div. - OK DOT URL:

405-521-2677 fax 405-522-0552 ODOT:

SUPERPAVE Digest 10

Topics covered in this issue include:

1) Re: Trial Blends Graph for Qpro or Lotus?

by (Milton M LaSalle)

Date: Wed, 08 Jan 1997 05:33:27 EST

From: (Milton M LaSalle)

To:

Subject: Re: Trial Blends Graph for Qpro or Lotus?

I've also been looking for a way to plot aggregate blends on a log scale

with Lotus. So far, no success. I haven't tried it on Quattro-pro yet.

So if anybody out there has the solution, I'm sure many of us would

appreciate hearing from you.

Milt

()

SUPERPAVE Digest 13

Topics covered in this issue include:

1) My Trial Blends Graph(s) for Lotus

by "Kenneth Hobson" <>

Date: Tue, 14 Jan 1997 22:52:26 -0600

From: "Kenneth Hobson" <>

To: "SuperPave List" <>

Subject: My Trial Blends Graph(s) for Lotus

I wish to thank the 4 email repliers again and hope you all enjoy my

version. You can download it at

Note: My sheet can handle up to 5 trial blends with up to 6 materials for

the 5 superpave size designs. It plots the restricted zone, maximum

density line, control points, shows only the x-axis grid lines for each

size sieve raised to the 0.45 power, labels top x-axis in metric and bottom

in US units, and up to five trial blends.

Please email me if you find a typo or glaring error. I have not had time

to test it in production yet and it is somewhat rough in spots.

More details below:

I had posted a request for a lotus or qpro spreadsheet that showed the

plotting of the trial blends percent passing vs. sieve sizes raised to the

0.45 power. Lotus and qpro are the two spreadsheets that I wanted to use.

I recieved 4 emails on the subject with 2 excel spreadsheets and one lotus.

Unfortunately, the graphs did not translate from the 2 excel spread sheets

and the lotus one was not what I needed. I did gleam enough from them to

come up with my own that I would like to share with any that want it (there

was one request).