BLL Ver 1.01 Update – p.2

Software Update for

Baby Lock Ellageo Version 1.01

June, 2006

Introduction

If the software version of your Ellageo (Model BLL) is earlier than version 1.01, an update program is now available for download to improve its performance.

**MEMO**
When the machine's software is upgraded, saved combinations of characters and decorative stitches are erased. However, saved embroidery patterns are not erased.

Version 1.01 update will provide the following changes

1.  Version 1.01 fixes the concern of memorizing patterns properly under certain conditions.

2.  This update will fix the occasional inability of accessing the “Sewing screen” when the [Sewing] key is touched in embroidery mode.

List of recommended CD drives

* Compatible with version 1.00 and higher.

CD/DVD Drive
TEAC / DW-2245PU
BUFFALO / CRW-L40U2
IOMEGA / CD-RW
Memorex / High Speed External USB2.0 CD-RW Drive 40X
BENQ / External DVD±R/RW EW162I
DYNEX / EXTERNAL CD-R/CD-RW DRIVE DX-ECDRW100
EMPREX / CD-RW External USB2.0 Drive 52X
LITEON / 16X EXTERNAL DVD±R/±RW Drive SHOW-1673SX05C
PLEXTOR / PX-716UF
EXACT / External USB CD-R/RW Drive
PacificDigital / X-TREME52

To confirm the software version of your Baby Lock Ellageo

  1. Press the main power switch to turn on your machine, and then touch the screen.

2.  Press Setting Mode Key in the upper left corner of the display.

3.  Go toward p.6, and you can see the software version number.
(If the version is already version 1.01 or higher, it is not necessary to update your machine with the program on this page.)

How to download the update program

  1. Create a temporary folder (ex. C:\Temp) on your computer to save the update program file to be downloaded.
  2. Click the “DOWNLOAD FILE” below.
  3. Select the previously created temporary folder (ex. C:\Temp) where the downloaded file should be stored.
  4. Download the file.

Download FILE (UPG File size: 2.9MB)

To update your machine

You can update your machine by the following method.

Instruction PDF (File size: 99 KB)

**Note**
Please check your computer's operating system.
USB functionality is only available with Microsoft Windows Me / 2000 / XP Windows 98 SE requires a driver.
Please download the BLL Driver Update for Windows 98 SE from your Baby Lock website first.

Ellageo (Model BLL) Update

<Error message>

If an error occurs, an error message will appear.

Copyright ã 2004-2005 Baby Lock USA

Customer Support: 1-800-313-4110