25 September 2017

Information Management Division, Version 9**

Formatted table template

To be inserted in each procedural submission cover letter.

1* / Applicant/MAH Name /
2* / Customer Account Number / 000060xxxx (only for WS, IG and MAA) /
3* / Customer Reference / Purchase Order Number /
4 / INN / Active substance/ATC Code /
5 / Product Name of centrally authorised medicinal product(s) /
5.1* / Nationally Authorised Product(s) / Please refer to Annex I /
6* / Product Number or
Procedure Number or
PSUSA (PSUR Single Assessment)
Non-EU single assessment
PSUR Period Covered (for both PSUSA and Non-EU procedures) / H XXXX or
EMEA/H/C/XXXX / type / or
PSUSA/000XXXXX/yyyymm
National Marketing Authorisation No
- /
7* / Submission Type (Please select) / MAA - Marketing Authorisation ApplicationExtension of a MA (Annex I)Grouping of Type IA (IG)Worksharing (WS)Variation - type 1aVariation - type 1ainVariation - type 1bVariation - type 2RenewalAnnual Conditional RenewalAnnual Re-AssessmentTransfer of a MANotification-61-3PAMs (complete section 12)PASS protocol (Art. 107n)PASS results (Art. 107q)PASS amendments (Art. 107o)PSUSA/PSURReferral under Article 20Referral under Article 31RMPClinical data for publication – Redaction ProposalClinical data for publication – Final VersionWithdrawal of a marketing authorisationOther /
7.1* / Submission Unit Type / Please select:InitialValidation-responseResponseAdditional-infoConsolidating sequence/Procedure WithdrawalCorrigendumClosing sequenceReformatOther /
7.2* / Grouping (more than one scope) / Yes /
7.3* / Submission Description / Please select:Responses to Request for Supplementary Inf.Responses to List of QuestionsResponses to List of Outstanding IssuesClinical d/f publication Final Ver - CompleteClinical d/f publication Final Ver - PartialOther Please select:Responses to Request for Supplementary Inf.Responses to List of QuestionsResponses to List of Outstanding IssuesClinical d/f publication Final Ver - CompleteClinical d/f publication Final Ver - PartialOther /
8* / Please provide the name(s) of any centrally authorised medicinal product for which the same change(s) are being applied for outside of this procedure
Product name and number: /
9* / RMP included in this submission: / Yes No / RMP version No. /
10* / eCTD sequence / 00xx / Related sequence / 00xx /
11* / Contact Persons’ details
(include email address) / A) Regarding the content of the submission:
B) Regarding eCTD technical questions: /
To be completed as applicable: /
12* / For PAM submissions or in case a procedure such as a variation addresses an outstanding PAM: / I confirm that I have completed the PAM submission form and inserted it in this submission. Please follow this link to access the PAM submission form. /
I confirm that the submission does not fall under any categories of the Classification guidance on variations and that the data submitted do not influence the benefit-risk balance and therefore do not require taking further regulatory action on the marketing authorisation. /
I confirm that the submission does not include a final study report (except P46 applications) /
12.1* / EPITT Number /
13* / For submissions of final study reports in the context of a variation / Please select:Clinical Efficacy/Safety studyNonclinical studyClinical pharmacology studyPost-auth efficacy study (PAES)Post-auth safety study (PASS) interventionalPost-auth safety study (PASS) non-interventionalOther /
14 / For P46 submissions / study title and number Please selectis aare stand alone study(ies).
study title and number Please selectis are part of a clinical development program. The Please selectvariationextension application consisting of the full relevant data package (i.e. containing several studies) is expected to be submitted by MM/YY. A line listing of all the concerned studies is attached for your consideration. /
15* / Submission in accordance to Art. 8 of Paediatric Regulation (EC) No 1901/2006 of 12/12/2006 / Is your product protected by a Supplementary Protection Certificate (SPC) or a patent that qualifies for a SPC?
Yes No /
16 / Confirmation that the clinical reports submitted for scientific evaluation are the same as those submitted for publication, in the Redaction Proposal and Final Redacted Versions, except for the redactions / Included
Yes /

* please see explanatory notes below

Technical instructions for the above table template can be found at the end of this document

** track changes removed

Annex I

Specific Information for PASS107 Submissions

Product Name (in authorisation country) / MRP/DCP Authorisation number / Authorisation Number of product in the member state / MAH of product in the member state / Member State where product is authorised / Legal Basis /

Product Name - The medicinal product name should be provided as all the information stated before the strength or pharmaceutical form of the full medicinal product name (as in the SmPC) including any other designations that follow the invented name, the common name or the company name (for generic).

MRP/DCP Authorisation number - the MAH should include one line per Member State and product, entering the MAH in the particular Member State; presentation/strength should not be considered for this. In case a product has multiple national numbers, please mention all of them in one cell.

Authorisation Number of product in the member state – should be entered as described above

MAH of product in the member state - MAH in the Member State where the medicinal product is authorised

Member State where product is authorised - country in which the medicinal product is authorised

Legal Basis - Please include the legal basis on the basis of which the medicinal product was authorised. Medicinal products authorised in accordance to Article 10(1) (generics), Article 10a (well-established use), Article 14 (homeopathics simplified registration) and Article 16a (traditional herbals) of Directive 2001/83/EC are waived by the legislation of the obligation to submit PSURs, unless otherwise specified in the EURD list. Please ignore this field if this submission relates to a PASS107 procedure.


Annex II

Specific Information for joint PASS107 Submissions for future invoicing.

Customer Account Number / Company Name / Total Number of MAH / Customer Reference PO Number / Contact Email /

Customer Account Number – Please quote your EMA designated customer account number (only for PASS107 procedures). To request an EMA customer account number or for any other query on your account with EMA please email to . For PSUR Single Assessment procedures the Agency will send an invoice to the Marketing Authorisation Holder’s address registered in Art.57 database at the time start of the procedure. Different account numbers for PSURs single assessment procedure inserted here will not be considered. For queries on different billing addresses please contact

Company name – company related directly from the Customer Account Number.

Total Number of MAH – total number of organisation codes as per Art 57 database, affiliated to the same SAP Number.

Customer Reference PO Number – Purchase order number, if applicable.

Explanatory notes

1) MAH: Marketing Authorisation Holder

2) The customer account number is a unique reference number with the Agency for financial matters. The Agency issues invoices to the Marketing Authorisation Holder associated with the customer account number held on the Agency’s file. You must quote your customer account number only if your submission relates to Worksharing (WS), Type IA procedures concerning more than one medicinal product (IG) and Marketing Authorisation Application (MAA). For any other submissions related to CAPs involving only one product, the field should be left blank. For Pass107 joint submissions please refer to Annex II table. To request a new customer account number or for any other queries related to your existing customer account please contact .

3) This is a reference number provided by the applicant (i.e. PO – purchase order number). It will be quoted on the invoice issued by the Agency. If not applicable, please state clearly ‘NOT APPLICABLE’. For Pass107 joint submissions please refer to Annex I table. Applicants submitting PSUR Single Assessment procedures requiring a purchase order number or similar reference on the invoice should provide a yearly standing (blanket) purchase order covering all the fees levied by the Agency for a given financial year in advance of this submission. For queries on purchase order numbers or similar references please contact .

4) ATC code should be maintained only for PSUSA procedure type.

5.1) Tick this box if your submission is related to Nationally Authorised Products (NAPs) and provide the details of these products in Annex I. If your submission does not contain NAPs, please do not submit Annex I.

6) Insert the product number (Hxxxx) for the submission of Full Applications, this number is needed in order to identify and assign the correct submission to the correct product case number. Applicants can find this number in the letter confirming their Eligibility. Failure to mention the product number at this stage may result in delays or non-acknowledgment of submission. Contact EMA in advance if the number is unknown. This number should also be referenced for an ASMF submission.

In the Post Authorisation phase the procedure (or variation) number will be assigned to you only upon receipt of an eCTD application. Once this number has been assigned (e.g. EMEA/H/C/00xx/IB/xxxx), it must be quoted in all follow-up correspondence during and after the procedure (e.g. Responses to EMEA/H/C/00xx/IB/variation number).

For PSUR Single Assessment, please insert the pre-allocated number as published to the EURD ID list.

See EURD list:
http://www.ema.europa.eu/docs/en_GB/document_library/Other/2012/10/WC500133159.xls

For Non-EU-PSUSA procedures (i.e. active substances only authorised in a single member state and not included in the EURD list) applicants should tick the relevant box and national marketing authorisation number should be included.

7) Choose from specified list. The submission type describes the regulatory activity to which the content will be submitted.

7.1) Choose from specified list. The submission unit type element of the envelope metadata set describes the content at a lower level (a “sub-activity”) which is submitted in relation to a defined regulatory activity such as the initial submission, the applicant response to validation issues or list of questions or any other additional information.

7.2) In case of only variation procedure, please indicate if it is grouped variation (application for more than one scope).

7.3) Choose from specified list. Description provides further granularity and information about specific procedure phase.

8) In case identical changes have been/are being applied for outside of a worksharing procedure for any other centrally authorised medicinal product, please provide the name(s) of the affected product(s).

9) No RMP can be submitted as a part of a PSUSA procedure containing nationally authorised products.

10) eCTD sequence number (electronic common technical document). Please note: duplication of sequences are not accepted and will not be processed. In case of NAPs submissions in the context of PSUR Single Assessment, NeeS are also accepted, please indicate related sequence number in the same box.

11) A) Contact person as specified in section 2.4.2 (for initial application) or 2.4.3 (for post-authorisation applications) in Part IA/Module 1 Application Form. If the contact name changes during the procedure, please inform us by submitting the related notification.

12) Applicable in case of post-authorisation measure (PAM) submission only. The PAM submission form can be found with the following link: http://esubmission.ema.europa.eu/doc/PAM_v1.0.0.0.pdf

For imposed non-interventional PASS, please leave section 12 blank and select PASS protocol (Art. 107n) or PASS results (Art. 107q) in section 7.

Please also confirm that the submission does not fall under the scope of any category of the variations classification guideline. If this is the case a variation application should be submitted instead. Final study results cannot be assessed as PAMs, with the exception of the studies submitted in accordance with Article 46 of the Paediatric Regulation. Please refer to the EMA Post-authorisation Guidance.

12.1) The EPITT number should only be provided for signal detection submissions.

13) Applicable only for submissions of final study reports in the context of a variation. Choose from specified list the study type (Clinical efficacy/safety study, Nonclinical study, Clinical pharmacology study, Post-authorisation efficacy study (PAES), Post-authorisation safety study (PASS) interventional, Post-authorisation safety study (PASS) non-interventional, or other).

15) If your product is protected by a Supplementary Protection Certificate (SPC) or a patent that qualifies for a SPC in accordance with Art.8 of Paediatric Regulation (EC) No 1901/2006 of 12/12/2006 please tick YES, otherwise tick NO even if not applicable.

Technical instructions

In order to make full use of the features of the form above, save the Word document in your local directory.

Word 2003:

Activate the Form toolbar and click on unprotect Form ; copy and paste the table in your desired document and reactivate the form protection by clicking on the padlock icon again. .

Word 2010:

Select Stop Protection. Copy and paste the table in your desired document and reactivate the form protection by selecting:

Start enforcing protection (password is optional). Please do not modify any layout of the published table