NZQA registered unit standard / 23066 version 2
Page 1 of 3
Title / Demonstrate knowledge of glass furnace structure and operations
Level / 2 / Credits / 2
Purpose / People credited with this unit standard are able to demonstrate knowledge of glass furnace structure and operations.
Classification / Glass and Glazing > Glass Container Manufacturing
Available grade / Achieved
Entry information
Critical health and safety prerequisites / Open.

Explanatory notes

Enterprise means an organisation where assessment is taking place, and/or where the trainee is employed.

Enterprise procedures refer to the documented procedures used by the organisation carrying out the work and applicable to the tasks being carried out. They may include but are not limited to – standard operating procedures, site safety procedures, equipment operating procedures, codes of practice, quality assurance procedures, housekeeping standards, charging of time and materials, management of drawings and documentation, procedures to comply with legislative and local body requirements.

Outcomes and evidence requirements

Outcome 1

Demonstrate knowledge of glass furnace structure and operations.

Evidence requirements

1.1The differentimportance and priorities of energy sources used for melting glass in a glass furnace are identified in accordance with enterprise procedures.

Rangeenergy sources – gas, electricity, oil.

1.2The structural elements of a glass furnace are identified, and their purposes describedin accordance with enterprise procedures.

Rangestructural elements – rear wall, dog-house, melting end, crown, throat, working end, refiner, regenerators, port arches, buck-stays

1.3The refractory materials used in a glass furnace are identified and their purposes described in accordance with organisational procedures.

Rangerefractory materials – glass contact, insulation.

1.4Glass furnace ancillary equipment is identified, and their purposes described.

Rangeancillary equipment – batch hoppers, batch chargers, gas burners, electro-boost, furnace pressure control, level probe, damper control system, bubblers, temperature monitoring and control system, wind-cooling system, water-cooling system.

Planned review date / 31 December 2019

Status information and last date for assessment for superseded versions

Process / Version / Date / Last Date for Assessment
Registration / 1 / 20 November 2006 / 31 December 2017
Review / 2 / 16 April 2015 / N/A
Consent and Moderation Requirements (CMR) reference / 0134

This CMR can be accessed at

Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.

Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.

Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact Competenz if you wish to suggest

changes to the content of this unit standard.
.

Competenz
SSB Code 101571 / New Zealand Qualifications Authority 2018