BRUNING PAINT CO INC -- 521-01 WHITE BASE SILATHANE INT/EXT BRUTONE INTERIOR -- 8010-00F052652

======Product Identification ======

Product ID:521-01 WHITE BASE SILATHANE INT/EXT BRUTONE INTERIOR

MSDS Date:08/01/1993

FSC:8010

NIIN:00F052652

MSDS Number: CDBWW

=== Responsible Party ===

Company Name:BRUNING PAINT CO INC

Address:601 S HAVEN ST

City:BALTIMORE

State:MD

ZIP:21224-4347

Country:US

Info Phone Num:410-342-3636/3641

Emergency Phone Num:410-342-3636/3641

CAGE:EO376

=== Contractor Identification ===

Company Name:BRUNING PAINT COMPANY

Address:601 S. HAVEN STREET

City:BALTIMORE

State:MD

ZIP:21224

Country:US

Phone:800-424-9300(NIGHT)410-342-3636 DAY

CAGE:EO376

Company Name:KYANIZE PAINT

Address:601 S HAVEN ST

Box:City:BALTIMORE

State:MD

ZIP:21224

Country:US

Phone:800-368-2076

CAGE:85520

======Composition/Information on Ingredients ======

Ingred Name:STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS

*96-4*

CAS:8052-41-3

RTECS #:WJ8925000

Fraction by Wt: 25-50%

Other REC Limits:525 MG/CUM

OSHA PEL:500 PPM

ACGIH TLV:100 PPM

Ingred Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

SILICATE *96-4*

CAS:14807-96-6

RTECS #:WW2710000

Fraction by Wt: 0-5%

OSHA PEL:2 MG/CUM (RESP DUST)

ACGIH TLV:2 MG/CUM (RESP DUST)

Ingred Name:MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

MINERAL SPIRITS *96-4*

CAS:64742-88-7

Fraction by Wt: 0-5%

Other REC Limits:100 PPM

OSHA PEL:500 PPM

ACGIH TLV:100 PPM

Ingred Name:VOLATILE ORGANIC CONTENT: 3.32 TO 3.74 LBS/GAL

RTECS #:9999999VO

======Hazards Identification ======

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO

Reports of Carcinogenicity:NTP:NO IARC:NOOSHA:NO

Health Hazards Acute and Chronic:MAY CAUSE NOSE, THROAT & EYE

IRRITATION. REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE

PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.

Explanation of Carcinogenicity:NONE

Effects of Overexposure:IRRITATION, DIZZINESS, HEADACHE, INTOXICATION,

EUPHORIA, UNCONSCIOUSNESS.

======First Aid Measures ======

First Aid:EYES: FLUSH W/LUKE WARM WATER FOR 15 MINS. SKIN: FLUSH WASH

W/COPIOUS AMOUNTS OF LUKE WARM WATER. INHALATION: REMOVE TO FRESH

AIR. RESTORE BREATHING IF REQUIRED. INGESTION: RINSE MOUTH

IMMEDIATELY. GI VE 6-8 OUNCES OF LIQUID. NEVER GIVE ANYTHING BY

MOUTH TO AN UNCONSCIOUS PERSON. DON'T INDUCE VOMITING UNLESS

ADVISED BY A PHYSICIAN. OBTAIN MEDICAL ATTENTION IN ALL CASES.

======Fire Fighting Measures ======

Flash Point Method:TCC

Flash Point:104F

Lower Limits:0.9

Upper Limits:7

Extinguishing Media:THE NFPA CLASS B EXTINGUISHER.

Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE

USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE

PREFERABLE.

Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN

EXPOSED TO EXTREME HEAT. DON'T APPLY TO HOT SURFACES. NEVER USE

WELDING/CUTTING TORCH ON/NEAR CONTAINER, MAY IGNITE/EXPLODE.

======Accidental Release Measures ======

Spill Release Procedures:STOP &/CONTAIN DISCHARGE SAFELY. KEEP SOURCES

OF IGNITION AWAY. VENTILATE AREA. USE NON-SPARKING TOOLS. COVER

W/INERT MATERIAL. KEEP OUT OF DRAINS, SEWERS/WATERWAYS. CONTACT

FIRE AUTHORITIES. NOTIFY L OCAL HEALTH & POLLUTION CONTROL

AGENCIES.

======Handling and Storage ======

Handling and Storage Precautions:DON'T STORE >120F. DON'T CUT/PUNCTURE

CONTAINER. DON'T WELD NEAR CONTAINER. KEEP CONTAINER TIGHTLY CLOSED

WHEN NOT IN USE. USE W/ADEQUATE VENTILATION.

Other Precautions:GROUND CONTAINERS WHEN POURING & LIMIT FREE-FALL TO A

FEW INCHES. AVOID CONTAMINATED RAGS/IGNITABLE ORGANIC MATERIALS.

INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE

CONTENTS MAY BE H ARMFUL/FATAL. DON'T BREATHE VAPORS/MIST.

======Exposure Controls/Personal Protection ======

Respiratory Protection:IN OPEN AREAS DURING SPRAY APPLICATION, USE

NIOSH/MSHA MECHANICAL FILTER RESPIRATOR/IN RESTRICTED AREAS, USE

NIOSH/MSHA APPROVED CHEMICAL MECHANICAL FILTERS/IN CONFINED AREAS,

USE NIOSH/MSHA APPROVED AIR LINE TYPE RESPIRATORS/HOODS.

Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP TLV BELOW ACCEPTABLE

LIMIT DURING WELDING/FLAME CUTTING ON COATED SURFACES.

Protective Gloves:NATURAL RUBBER/NEOPRENE/BUNA N/NITRILE

Eye Protection:GOGGLES

Other Protective Equipment:APRON

Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE

REUSE. WASH HANDS THOROUGHLY BEFORE EATING & USING WASHROOM.

Supplemental Safety and Health

% VOLATILE BY VOLUME: 50.96-57.73.

======Physical/Chemical Properties ======

Boiling Pt:B.P. Text:300-416F

Vapor Pres:2

Vapor Density:>1

Evaporation Rate & Reference:SLOWER THAN BU AC

Percent Volatiles by Volume:(SUPP)

======Stability and Reactivity Data ======

Stability Indicator/Materials to Avoid:YES

WELDING

Stability Condition to Avoid:SPARKS, OPEN FLAME, HOT SURFACES, SOURCES

OF IGNITION.

Hazardous Decomposition Products:CO, CO2 & OXIDES OF NITROGEN.

======Disposal Considerations ======

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL

REGULATIONS. DON'T FLUSH TO SEWER, WATERSHED/WATERWAY.

Disclaimer (provided with this information by the compiling agencies):

This information is formulated for use by elements of the Department

of Defense. The United States of America in no manner whatsoever,

expressly or implied, warrants this information to be accurate and

disclaims all liability for its use. Any person utilizing this

document should seek competent professional advice to verify and

assume responsibility for the suitability of this information to their

particular situation.