August 1, 2008
TO:Mark Schneiderhan, Chair
Senate Committee on Educational Policy
FROM:Midge Grosch
Director, Programs and Academic Assessment
I am forwarding for review and action by the Senate Committee on Educational Policy the attached Revision of B.S. in Industrial Engineering and Minor in Industrial Engineering.
The proposal was approved by the Educational Policy Committee in the College of Engineering on December 14, 2007.
Attachment
Cc:M. McNallan
H. Darabi
Title: / Revision of the Bachelor of Science in Industrial Engineering and Minor in Industrial EngineeringSponsor: / Department of Mechanical and Industrial Engineering
Description: / PHYS 244, General Physics I, Modern Physics (3 hours) will be dropped from the list of the required courses. MATH310, Applied Linear Algebra (3 hours) will be added to the list of the required courses. MATH 310 will become a prerequisite for IE471. Total credit hours required for the degree (128) will not be affected.
Add MATH 310 (3 hours) as a required prerequisite course for the Minor in Industrial Engineering. As a result, total prerequisite hours for the minor increases from 22 to 25. Hours required for the minor remain the same at 12.
Justification: / Recent trends in the industrial engineering market have shifted the focus of industrial engineers from manufacturing to service systems. This shift has caused the PHYS244 materials to be no longer essential to industrial engineers. At the same time there is a need to improve industrial engineering students’ knowledge of modeling and analysis of linear optimization problems. MATH 310 will prepare the students in this area. It also prepares the students for a better understanding of linear programming that is taught in IE471. Both Mathematics and Physics departments have been informed and agree with these changes. Since IE471 is a required course for Minor in Industrial Engineering, MATH310 will be added to the list of the requirements for a Minor in Industrial Engineering.
Catalog Statement: / There is no change in the catalog statements for MATH310 and PHYS244. The only change is to add MATH310 to the prerequisites of IE471. All other statement changes have been attached.
Minority Impact Statement: / None expected.
Budgetary and Staff Implications: / About 15 students per year will be reduced from the enrollment in PHYS 244 and the same amount will be added to MATH 310. Given the high enrollment figures in these courses we do not expect to see any significant changes in the related budget in the LAS college.
Library Resource Implications: / None expected.
Space Implications: / None expected.
Unit (e.g. department) approval date:
College (educational policy committee, faculty) approval dates: / 11/30/2007
December 14, 2007 – College of Engineering EPC
Contact Person: / Houshang Darabi,
Proposed Effective Date: / Spring, 2009
BS in Industrial Engineering
Industrial engineering is concerned with the design, improvement, and installation of integrated systems of people, material, and equipment….
Degree Requirements—Industrial Engineering
To earn a Bachelor of Science in Industrial Engineering degree from UIC, students need to complete University, college, and department degree requirements. The Department of Mechanical and Industrial Engineering degree requirements are outlined below. Students should consult the College of Engineeringsection for additional degree requirements and college academic policies.
Mechanical andIn
BS in Industrial Engineering Degree Requirements Hours
Nonengineering and General Education Requirements 56
Required in the College of Engineering 65
Technical Elective 3–4
Electives outside the Major Rubric 3
Free Elective (may be required) 0–1
Total Hours—BS in Industrial Engineering 128
Nonengineering and General Education Requirements
Courses Hours
ENGL 160—Academic Writing I: Writing for Academic and Public Contexts 3
ENGL 161—Academic Writing II: Writing for Inquiry and Research 3
Exploring World Cultures coursea 3
Understanding the Creative Arts coursea 3
Understanding the Past coursea 3
Understanding the Individual and Society coursea 3
Understanding U.S. Society coursea 3
MATH 180—Calculus Ib 5
MATH 181—Calculus IIb 5
MATH 210—Calculus IIIb 3
MATH 220—Introduction to Differential Equations 3
CHEM 112—GeneralCollege Chemistry Ib 5
PHYS 141—General Physics I (Mechanics)b 4
PHYS 142—General Physics II (Electricity and Magnetism)b 4
PHYS 244—General Physics III (Modern Physics) 3
MGMT 340—Introduction to Organizations 3
Total Hours—Nonengineering and General Education Requirements 56
a Students should consult the General Education section of the catalog for a list of approved courses in this category.
bThis course is approved for the Analyzing the Natural World General Education category.
Required in the College of Engineering
Courses Hours
ENGR 100—Orientationa 0a
CME 201—Statics 3
CME 203—Strength of Materials 3
CS 108—Fortran Programming for Engineers 3
ECE 210—Electrical Circuit Analysis 3
IE 201—Financial Engineering 3
IE 341—Ergonomics 3
IE 342—Probability and Statistics for Engineers 3
IE 345—Regression Applications and Forecasting in Engineering 3
IE 365—Methods Analysis and Work Measurement 4
IE 380—Manufacturing Process Principles 3
IE 396—Senior Design 4
IE 446—Quality Control and Reliability 3
IE 461—Safety Engineering 3
IE 463—Plant Layout and Materials Handling 3
IE 464—Industrial Automation 3
IE 466—Production Planning and Inventory Control 3
IE 467—Industrial Systems Simulation 3
IE 471—Operations Research I 3
IE 472—Operations Research II 3
ME 250—Engineering Graphics and Design 3
ME 205—Introduction to Thermodynamics 3
IE 499 Professional Development Seminar —0
Total Hours—Required in the College of Engineering 65
a ENGR 100 is a one-semester-hour course, but the hour does not count toward the total hours required for graduation.
Technical Elective
Courses Hours
One course from the list below: 3–4
IE 392—Undergraduate Research (3)
ME 210—Engineering Dynamics (3)
ME 211—Fluid Mechanics I (4)
ME 325—Intermediate Thermodynamics (3)
ME 447—Introduction to Computer-Aided Design (3)
Any IE course at the 400-level not required above (3)
Total Hours—Technical Electives 3–4
Electives outside the Major Rubric
Courses Hours
Electives outside the IE Rubric 3
Total Hours—Electives outside the Major Rubric 3
Free Elective
Courses Hours
Free Elective—One semester hour may be required 0–1
Sample Course Schedule—Industrial Engineering
Freshman Year
First Semester Hours
MATH 180—Calculus I 5
CHEM 112—GeneralCollege Chemistry I 5
ENGL 160—Academic Writing I: Writing for Academic and Public Contexts 3
General Education Core course 3
ENGR 100—Orientationa 0a
Total Hours 16
a ENGR 100 is one-semester-hour course, but the hour does not count toward the total hours required for graduation.
Second Semester Hours
MATH 181—Calculus II 5
PHYS 141—General Physics I (Mechanics) 4
ENGL 161—Academic Writing II: Writing for Inquiry and Research 3
ME 250—Engineering Graphics and Design 3
CS 108—Fortran Programming for Engineering 3
Total Hours 18
Sophomore Year
First Semester Hours
MATH 210—Calculus III 3
PHYS 142—General Physics II (Electricity and Magnetism) 4
IE 201—Financial Engineering 3
CME 201—Statics 3
General Education Core course 3
Total Hours 16
Second Semester Hours
MATH 220—Introduction to Differential Equations 3
PHYS 244—General Physics III (Modern Physics) 3
CME 203—Strength of Materials 3
ME 205—Introduction to Thermodynamics 3
General Education Core course 3
Total Hours 15f Engineering
Junior Year
First Semester Hours
IE 341—Ergonomics I 3
IE 342—Probability and Statistics for Engineers 3
IE 365—Methods Analysis and Work Measurement 4
MGMT 340—Introduction to Organizations 3
General Education Core course 3
Total Hours 16
Second Semester Hours
IE 345—Regression Applications and Forecasting in Engineering 3
IE 380—Manufacturing Process Principles 3
IE 446—Quality Control and Reliability 3
ECE 210—Electrical Circuit Analysis 3
General Education Core course 3
Total Hours 15
Senior Year
First Semester Hours
IE 461—Safety Engineering 3
IE 464—Industrial Automation 3
IE 467—Industrial Systems Simulation 3
IE 471—Operations Research I 3
Technical elective 3
Free elective 1
Total Hours 16
Second Semester Hours
IE 396—Senior Design 4
IE 463—Plant Layout and Materials Handling 3
IE 466—Production Planning and Inventory Control 3
IE 472—Operations Research II 3
IE 499 Professional Development Seminar —0
Elective outside Major Rubric 3
Total Hours 16
Minor in Industrial Engineering
For the minor, 12 semester hours are required, excluding prerequisite courses. Students not majoring in Industrial Engineering who wish to minor in Industrial Engineering must complete the following:
Prerequisite Courses—Industrial Engineering Minor Hours
One of the following courses: 3
CS 101—Introduction to Computing (3)
CS 108—Fortran Programming for Engineers (3)
MATH 180—Calculus I 5
MATH 181—Calculus II 5
MATH 210—Calculus III 3
MATH 220—Introduction to Differential Equations 3
IE 201—Financial Engineering 3
Total Hours—Prerequisite Courses for Industrial Engineering Minor 22
Required Courses—Minor in Industrial Engineering Hours
IE 342—Probability and Statistics for Engineers 3
IE 446—Quality Control and Reliability 3
IE 463—Plant Layout and Materials Handling 3
IE 471—Operations Research I 3
Total Hours—Required Courses for Minor in Industrial Engineering 12 / Same.
Add “MATH 310—Applied Linear Algebra 3” after MATH 220
Remove PHYS 244
Replace “PHYS 244-General Physics III (Modern Physics) 3” with “MATH 310--Applied Linear Algebra 3”
Add “MATH 310 – Applied Linear Algebra 3” after MATH 220 in the list
Change 22 to 25
MATH 310Applied Linear Algebra
3 hours. Matrices, Gaussian elimination, vector spaces, LU-decomposition, orthogonality, Gram-Schmidt process, determinants, inner products, eigenvalue problems, applications to differential equations and Markov processes. Credit is not given for MATH 310 if the student has credit for MATH 320. Prerequisite(s): Grade of C or better in MATH 210.
PHYS 244General Physics III (Modern Physics)
3 hours. Special theory of relativity. Particle-wave duality. Uncertainty principle; Bohr model; introduction to quantum mechanics; Schroedinger equation; hydrogen atom; many-electron atoms. Introduction to nuclear and particle physics. Prerequisite(s): Grade of C or better in PHYS 107 and Grade of C or better in PHYS 108; or Grade of C or better in PHYS 142.
>Delivered-To:
>Date: Tue, 2 Sep 2008 12:55:28 -0500 (CDT)
>From: Gyorgy Turan <>
>X-X-Sender:
>To: Houshang Darabi <>
>cc: , Julie Kofod <>
>Subject: Re: Addition of MATH310 to IE and EM Curriculum --- Please
>Confirm
>X-UIC-Note: Local Origin
>X-Scanned-By: MIMEDefang 2.56 on 128.248.155.59
>X-Spam-Status: unchecked - local origin proc.
>Dear Houshang,
>Yes, our department is fine with the proposed changes.
>Best regards
>Gyorgy Turan
>MSCS, Associate Head for Insrtruction
Message 1 sent to Professor Hurder, () in the Department of Mathematics, Statistics and Computer Science on 6/25/2008:
>Delivered-To:
>Date: Thu, 26 Jun 2008 07:46:21 -0500 (CDT)
>From: Director of Undergraduate Studies <>
>To: Houshang Darabi <>
>cc:
>Subject: Re: Addition of MATH310 to IE and EM Curriculum --- Please
>Confirm
>X-UIC-Note: Local Origin
>X-Scanned-By: MIMEDefang 2.56 on 128.248.155.57
>X-Spam-Status: unchecked - local origin proc.
>Hi Houshang,
>Sorry to be delayed in replying. I am traveling in Europe just now - I
>am writing this from Cologne. But the proposal seems fine to me. I have
>forwarded your email to Professor Turan, who is the Associate Head for
>Instruction, and makes decisions concerning class sizes. I asked him to
>respond also to your email.
>Steve Hurder
>On Wed, 25 Jun 2008, Houshang Darabi wrote:
>Dear Professor Hurder,
>On 6/9/2008 I sent you a message regarding the addition of MATH 310 to
>our Industrial Engineering (IE) curriculum as a required course.
>As I informed you, the College of Engineering (COE) approved this
>addition and the case is now ready to go before the SCEP for its final
>approval. I would also like to inform you that the COE has approved
>the same course (MATH 310) to be added as a required course to our
>Engineering Management (EM) curriculum. We expect these additions to
>increase the number of enrollment in MATH310
>by15 students per year (on average).
>Could you please confirm the receipt of this message and let me know
>whether your unit is fine with these changes? I look forward to
>hearing from you.
>Sincerely,
>Houshang Darabi
****************************************************************************************
Statement regarding the removal of PHYS 244:
On August 7th, a meeting took place between representatives of the Department of Mechanical and Industrial Engineering in the College of Engineering and the Department of Physics in the College of Liberal Arts and Sciences. Both department heads were present. At that meeting, the reasons for this programmatic revision and the impact of eliminating PHYS 244 from the curriculum were discussed. While both Departments are interested in exploringhow the Physics Department course offering may serve current orfuture educational needs of IE students, IE Department sees it necessary in the interest of serving immediate student needs to initiate the changes in this proposal. The Physics Department took note of reasons presentedby the IE Department for initiating these changes to their curriculum.
1
Revised on 6/6/08