Fastener Tightening Specifications

Application / Specification
Metric / English
Air Conditioning Compressor Bolts / 50N·m / 37lbft
Camshaft Position Sensor Bolt / 10N·m / 89lbin
Camshaft Sprocket Bolt / 140N·m / 103lbft
Camshaft Thrust Plate Screw / 10N·m / 89lbin
Connecting Rod Bearing Cap Nut
  • FirstPass
/ 20N·m / 15lbft
  • FinalPass
/ 75degrees
Coolant Drain Plug / 19N·m / 14lbft
Coolant Temperature Sensor / 23N·m / 17lbft
Crankshaft Balancer Bolt
  • FirstPass
/ 70N·m / 52lbft
  • FinalPass
/ 72degrees
Crankshaft Main Bearing Cap Bolt/Stud
  • FirstPass
/ 50N·m / 37lbft
  • FinalPass
/ 77degrees
Crankshaft Oil Deflector Nut / 25N·m / 18lbft
Crankshaft Position Sensor Bolt - Front Cover / 10N·m / 89lbin
Crankshaft Position Sensor Stud - Side of Engine Block / 11N·m / 98lbin
Crankshaft Position Sensor Wiring Bracket Bolt / 27N·m / 20lbft
Cylinder Head Bolt
  • FirstPass
/ 60N·m / 44lbft
  • FinalPass
/ 95degrees
Drive Belt Shield Bolt / 10N·m / 89lbin
Drive Belt Tensioner Bolt / 50N·m / 37lbft
EGR Valve Pipe to EGR Valve Bolt / 25N·m / 18lbft
EGR Valve Pipe to Exhaust Manifold Nut / 25N·m / 18lbft
EGR Valve to Upper Intake Manifold Bolt / 30N·m / 22lbft
Engine Coolant Temperature Sensor / 25N·m / 17lbft
Engine Front Cover Bolt - Large / 55N·m / 41lbft
Engine Front Cover Bolt - Medium / 55N·m / 41lbft
Engine Front Cover Bolt - Small / 27N·m / 20lbft
Engine MountBracket Bolt / 58N·m / 43lbft
Engine MountLower Nut / 47N·m / 35lbft
Engine MountStrut Bolt - Horizontal/Verticle / 26N·m / 19lbft
Engine MountStrut Bolt/Nut / 48N·m / 35lbft
Engine MountStrut Bracket Bolt - Upper Radiator Support / 28N·m / 21lbft
Engine MountStrut Bracket Bolts / 50N·m / 37lbft
Engine MountUpper Nut / 47N·m / 35lbft
Engine Oil Pressure Indicator Switch / 16N·m / 12lbft
Engine to Transaxle Bolt/Stud / 75N·m / 55lbft
Engine Wiring Harness Bracket Bolt / 13N·m / 115lbin
Engine Wiring Harness Ground Nut / 35N·m / 26lbft
Exhaust Manifold Nut / 16N·m / 12lbft
Exhaust Manifold Stud / 18N·m / 13lbft
Flywheel Bolt / 71N·m / 52lbft
Fuel Feed and Return Pipe Clip Nut / 25N·m / 18lbft
Fuel Feed and Return Pipe Clip Stud / 50N·m / 37lbft
Fuel Feed Pipe to Fuel Injector Rail Nut / 17N·m / 13lbft
Fuel Injector Rail Bolt / 10N·m / 89lbin
Fuel Pipe Bracket Bolt/Stud / 50N·m / 37lbft
Fuel Pipe Clip Bolt / 8N·m / 71lbin
Fuel Return Pipe to Fuel Injector Rail Nut / 17N·m / 13lbft
Generator Bracket Bolt / 50N·m / 37lbft
Heated Oxygen Sensor / 42N·m / 31lbft
Heater Inlet Pipe Nut / 25N·m / 18lbft
Heater Inlet Pipe Stud / 50N·m / 37lbft
Ignition Coil Bracket Bolt/Nut/Stud / 25N·m / 18lbft
Intake Manifold Coolant Pipe Bolt / 10N·m / 89lbin
Knock Sensor / 19N·m / 14lbft
Left Engine MountBracket Bolts to Engine / 102N·m / 75lbft
Lift Bracket Bolt - Engine Left Rear / 70N·m / 52lbft
Lower Intake Manifold Bolt-Center
  • FirstPass
/ 7N·m / 62lbin
  • FinalPass
/ 13N·m / 115lbin
Lower Intake Manifold Bolt-Corner
  • FirstPass
/ 13N·m / 115lbin
  • FinalPass
/ 25N·m / 18lbft
MAP Sensor Bolt / 5N·m / 44lbin
Oil Cooler Connector / 50N·m / 37lbft
Oil Cooler Hose Fitting / 19N·m / 14lbft
Oil Cooler Pipe Bracket Bolt / 25N·m / 18lbft
Oil Filter / 13N·m / 115lbin
Oil Filter Bypass Hole Plug / 19N·m / 14lbft
Oil Filter Fitting / 39N·m / 29lbft
Oil Gallery Plug - 1/4 inch / 19N·m / 14lbft
Oil Gallery Plug - 3/8 inch / 33N·m / 24lbft
Oil Level Indicator Tube Bolt / 25N·m / 18lbft
Oil Level Sensor Bolt - if equipped / 10N·m / 89lbin
Oil Level Sensor Harness Retainer Bolt / 10N·m / 89lbin
Oil Pan Bolt / 25N·m / 18lbft
Oil Pan Drain Plug / 30N·m / 22lbft
Oil Pan Side Bolt / 50N·m / 37lbft
Oil Pump Cover Bolt / 10N·m / 89lbin
Oil Pump Drive Clamp Bolt / 36N·m / 27lbft
Oil Pump Mounting Bolt / 41N·m / 30lbft
PCV Valve Access Cover Bolts / 10N·m / 89lbin
Spark Plug - New Cylinder Head / 20N·m / 15lbft
Spark Plug - After Initial Installation / 15N·m / 13lbft
Thermostat Bypass Pipe to Engine Front Cover Bolt / 12N·m / 106lbin
Thermostat Bypass Pipe to Throttle Body Nut / 25N·m / 18lbft
Throttle Body Bolt/Stud / 25N·m / 18lbft
Timing Chain Dampener Bolt / 21N·m / 15lbft
Upper Intake Manifold Bolt/Stud / 25N·m / 18lbft
Valve Lifter Guide Bolt / 10N·m / 89lbin
Valve Rocker Arm Bolt / 32N·m / 24lbft
Valve Rocker Arm Cover Bolt / 10N·m / 89lbin
Water Outlet Bolt / 25N·m / 18lbft
Water Pump Bolt / 10N·m / 89lbin
Water Pump Pulley Bolt / 25N·m / 18lbft

Lower Intake Pattern

Cylinder Head Pattern

There is no sequence for the Rocker bolts.

  1. Important:The intake pushrods measure 144mm (5.68in) long.

The exhaust pushrods measure 152.5mm (6.0in) long.