Education / Islamic Omdurman University
Omdurman / Sudan
BSc. In Mechanical Engineering
January 1999
Management Training Programs
Professional Training Seminars / Management Training programs (Couse)
PMI – Project Management Professional (PMP) Course – Dubai, U.A.E.
Professional Training Seminars
A/C Supplier / Abu Dhabi
ASHRAE Interclimatic / Cairo
Samsung Technology / Sudan
SKM Technology / Sudan
PETRA / Sudan
Certifications
Computer Skills
Citizenship
Marital Status
Languages
References / Certification
Quality Assurance Management Attendance – Turner / Dubai
Management Skills for managers / Cairo
Microsoft Office, internet,
Sudan
Married + 2 children
Fluent in both Arabic & English
Upon request
Professional Experiences
Career
August 10 to Present
Pathfinder Engineering Enterprises
Executive Manager
Khartoum, SUDAN
August 08 to July 10
Engineering Consultant Group - ECG
Sr. Mechanical Eng.
Khartoum, SUDAN
April 07 to July 08
Ekin Proje,
Site Chief
Cairo, EGYPT
January 05 to April 07
Ekin Proje,
Site Manager
Dubai, U.A.E.
July 03 to December 04
Tailibert Gulf Consultant,
Mechanical Eng.
Abu Dhabi, U.A.E.
October 02 to July 03
Al Sultan Consultant,
Mechanical Eng.
Abu Dhabi, U.A.E.
August 02 to October 02
Al Aman Consultant,
ElctroMechanical Inspector
Abu Dhabi, U.A.E.
Sep. 1999 to October 01
Masria for kitchens & laundry contracting,
Service Engineer
Cairo, EGYPT
June 1999 to August 01
International Works Co.,
Site Engineer
Khartoum, SUDAN / Pathfinder Engineering Enterprises, Khartoum, Sudan
August 2010 to present: Executive Manager
ECG, Khartoum, Sudan
August 2008 to July 2010: Sr. Mechanical Eng.
Ekin Proje, Cairo, Egypt
April 07 to July 08: Site Chief
Ekin Proje, Dubai, U.A.E.
January 05 to April 07: Site Eng. / Site Manager
Tailibert Gulf Consultant, Abu Dhabi, U.A.E.
July2003 to December 04: Mechanical Engineer
Al Sultan Consultant, Abu Dhabi, U.A.E.
October 2002 to July 2003: Mechanical Inspector
Al Aman Consultant, Abu Dhabi, U.A.E.
August 2002 to October2002: Elctromechanical Inspector
Masria for Kitchen & Laundry Contracting Co., Cairo, Egypt
October 1999 to August 2000 After Sales Service Eng.
International Works Co., Khartoum, Sudan
June 1999 to September 1999 A/C Site Eng.
Pathfinder is my own company with partner (mech. Eng.); its business activities contents of: MEP contracting, HVAC/Plumbing/ Electrical Design, HVAC sub-consultant, Facilities Management (Maintenance Contracts) and Trading (AC accessories). As Executive Manager duties include but not limited to overall construction management (sites supervision, contract administration, procurement of contractors and material, financial reporting and control, and quality management.
As the Senior Mechanical Eng. For GNPOC New Tower Project located at Almogran Area; responsible for the overall mechanical systems at the project; supervision and resolutions of all construction obstructions includingdesign review, shop drawings approval, materials approvals, client liaison, attends coordination & progress meetings and prepare Monthly reports. Responsibilities also include the implementation of the ECG`s Quality Management, review reports and site inspections that has been conducted by junior mechanical engineer, make sure that project`s specification is executed at site as well and matching with B.O.Q. and review negative / positive variations payments.
Duties include field supervision on all mechanical aspects of the project. Insuring projects are done according to approved plans and specifications. Other duties include field inspection, problem solving and managing workers. Assist HVAC commissioning manager to start handling over the system. Co-ordinate with consultant`s comments on materials & site inspections approval. Monitor and advise junior site engineers.
Starting as a site engineer; execute works at site as per approved shop drawing then call the consultant for approval and site inspection, prepare weekly report and find the appropriate &approved materials to assist purchase engineer.
After then promoted to site manager responsible for site works and observe, guide site engineers to work as per scheduled time plan, internal weekly meeting then plan for site inspections priorities and site progress. Co-ordinate with design section, find site solutions, attend co-ordination meeting (with project management / consultants).
Get government permits (DEWA & Civil Defense) to hand over the project.
Review the Mechanical drawings and specifications done by the Design dept. to ensure completeness, correctness, compliance with the scope of work and agreement requirements.
Carry out constructability review during the execution stages; Ensure the contractor incorporates the comments raised from sr. mechanical engineer or my comments during site inspections or site round.
Testing & balancing monitoring and as per standard & specification.
Review the comments and approved shop drawings with sr. mechanical engineer, all required calculations as well and ensure that the contractor execute the works at site as per specifications, client`s requirements. Materials inspection when arrived at site, check all required test then issuing approvals.
Co-ordinate with the contractor to solve site obstruction that might occur during construction stage.
Check elctromechanical works at site based on approved shop drawings before concrete casting; solve construction obstruction and co—ordinate with other disciplines and reported to sr. elctromechanical engineer.
Spare parts supplying to our customer, maintenance team, installation team and new customer. Preparing recommended spare parts list for two years and attached with full package catalogues wherever handling over the projects.
Attend co-ordination meeting with sales engineers, our foreign agents and seminars.
Check the spare parts stock and order the missing/important parts, review the whole stock to our branches located on Sharm-el sheikh and Hurghada include with on-going projects.
Co-ordinate with customer`s engineers, technicians and in-charge person.
Execute air duct, chilled water piping, F.C.U.s….etc. installation and fixing as per provided shop drawings, prepare air leak test and hydraulic test to deliver it to consultant engineer, attend daily site co-ordination meeting with other disciplines.
Weekly payments to our labors and technicians, well communications with our head office and update accordingly.
Design negotiations with design dept. according to site conditions if any discrepancy.
Husham fathi Mohd. 1/4