Product / Surface Resistivity /
Applications
/ Features
AG-800
Silver Conductive Ink
/ <0.015 W/n / ·  Flex circuits
·  Membrane switches
·  Additive circuits
·  EMI/RFI applications
·  Thermal targets / ·  Good conductivity
·  High speed screen or pad printing
·  Thin for spray or dipping
·  Can blend with carbon to customize resistance
·  Crease resistant
AG-500
Silver Conductive Ink
/ 0.02 W/n / ·  Used for EL panel bus bars on ITO
·  Touch screen bus bars
·  Difficult substrates
·  Flex circuits
·  Membrane switches
·  EMI/RFI shielding / ·  Screen printable
·  Wets out well and has better adhesion on ITO substrates
·  High conductivity
·  Thin for spray or dipping
·  Can blend with carbon to customize resistance
AG-755
Silver Conductive Ink
/ <0.008 W/n / ·  Flex circuits
·  Membrane switches
·  Additive circuits / ·  For fine line printing
·  Screen printable
·  Highest conductivity
·  Higher viscocity, minimal slumping
·  Excellent adhesion to metals
·  Can be thinned for spray or dipping

AG-510

Silver Conductive Ink
/ <0.020 W/n / ·  Additive circuits
·  Printed heaters
·  PTF circuits
·  Defibrillator pads
·  EKG/EEG electrodes
·  Blood glucose sensors
·  EMI/RFI applications
·  EL panels
·  Membrane switches / ·  Screen or pad printable
·  Fast drying
·  Highly conductive
·  Adheres to difficult substrates such as ITO or other metal oxides
AG-594
Silver Conductive Ink / <0.018 W/n / ·  Flex circuits
·  RFID & cell phone antennas
·  EEG/EKG/blood glucose disposable sensors
·  Additive circuits
·  EMI/RFI applications / ·  High speed gravure or flexo printing
·  For extremely thin line printing
·  Excellent edge definition
·  Excellent adhesion to most metal
·  surfaces as well as polyester, polyimide
·  & polycarbonate films
·  Can be thinned
AGCL-675/675C
Silver/ Silver Chloride Inks / <0.035 W/n / ·  Defibrillator pads
·  EKG/EEG electrodes / ·  Smooth or coarse surface finish
·  Screen or pad printable
·  Adjustable for gravure & flexographic printing
·  Blendable for specific resistance values
AGCL-823
Silver/Silver Chloride Ink / <0.020 W/n / ·  Defibrillator pads
·  EKG/EEG electrodes / ·  One part epoxy adhesive ink
·  Crosslinked system
·  Screen or pad printable
·  Long working time, quick cure
·  Used for electrodes with aggressive gels
C-200
Carbon Resistive Ink / 50 W/n / ·  Membrane switches
·  Overprint for silver conductive traces
·  Flex circuits
·  Additive circuits / ·  Vinyl based thermoplastic
·  Screen printable
·  Excellent adhesion to polyester & polyimide substrates
·  Not recommended on ITO
·  Can be blended with AG-800 for specific resistance values
·  Can be used as base electrode for EL panels
C-774
Carbon Ink / 30 W/n / ·  Membrane switches
·  Medical sensors
·  Heaters
·  Resistance pads
·  Overprint for silver conductive traces printed on polycarbonate substrate / ·  Screen printable
·  For use on polyester, polyimide and polycarbonate substrates
·  Excellent adhesion to most metal surfaces
·  Fast dry time in low temperature oven
·  Rheology can be adjusted
EP-600
Two-Part Silver Epoxy / <1.0 x 10-3 W-cm
volume resistivity / ·  Component or wire attachment
·  Filling via holes or spaces / ·  Low temperature curing
·  Dot Dispensable
·  Fast cure
·  Suitable for flexible substrates
EP-900
Two-part Silver
Stencil Epoxy / <1.0 x 10-3 W-cm
volume resistivity / ·  Component attachment & termination on hybrid circuits, membrane keypads & other assemblies / ·  Two-part electrically conductive epoxy
·  For stencil printing processes
·  Low cure temperature
·  Excellent bond strength, temperature resistance and toughness
·  6 month shelf life
·  Available in pre-measured CC-paks, bulk or syringes
EP-1100
One-part Silver
Conductive Epoxy / <5.0 x 10-4 W-cm
volume resistivity / ·  Component attachment & termination on hybrid circuits, membrane keypads & other assemblies / ·  One part epoxy
·  30-day shelf life
·  Screen or stencil printing
EP-452
Two-part Thermally Conductive Adhesive/Potting Compound / 1 X 1013-cm
volume resistivity / ·  Potting thermocouples, thermistors and assemblies
·  Attaching components or assemblies to heat sinks / ·  Two part component epoxy adhesive
·  High thermal conductivity
·  Electrically insulating
·  High temperature and solvent resistant
Sil-Con
Two-part Potting
Compound / <.06 W-cm
volume resistivity / ·  Gasket sealing for EMI/RFI shielding
·  Flexible conductive interconnect between surfaces on touch screens & EL panels / ·  Very flexible & strong two-part component
·  100% solids
·  Electrically conductive
·  Temperature & solvent resistant
·  Easy removal for component repair or replacement
EP-837
Clear Epoxy Staking Adhesive / 1 X 1014 W-cm
volume resistivity / ·  Staking or anchoring
components or wires
·  Encapsulating components / ·  Screen or pad printable
·  Low viscosity, 100% solids
·  Non-conductive
·  Dot dispensable
·  Available in clear or green color
·  Low temperature, fast curing
HTC-300

Hi-Temp Carbon Filled Ink

/ 100 W/n / ·  PTF circuits
·  Printed heater circuits
·  Printed rheostats
·  Flex circuits
·  Additive circuits / ·  Used for higher temperatures
·  Tough, durable surface finish
·  Screen printable
HTC-350
Hi-Temp Carbon Filled Ink / 100 W/n / ·  PTF circuits
·  Printed Heater Circuits
·  Printed Rheostats
·  Flex circuits
·  Additive circuits / ·  Crosslinked thermoset for even more solvent resistance and higher temperature stability than HTC-300
·  Tough, durable surface finish
·  Screen printable, especially for fine line/fine pitch
·  Excellent adhesion to polyester & polyimide surfaces
·  Can be blended with silver filled ink for specific resistance values
·  Additional baking time required
PTC-614
Carbon Heater Ink
/ <10K W/n / ·  Printed heater circuits / ·  Screen or pad printable
·  Self regulating ink for heater
applications
RO-593
Radio Opaque Ink
/ 1014 W/n / ·  Visual reference for X-ray or
NMR / ·  Fast drying
·  Screen, gravure, flexographic
or pad printable
UV-3010
UV Encapsulant &
Conformal Coating / 1014 W/n / ·  Component encapsulation
·  Wire or component staking / ·  Screen or pad printable
·  UV curable, 100% solids
·  Dot dispensable
·  Moisture resistant
·  Suitable for flexible substrates
UV-772
Fluorescing Ink/Coating / 2.9 x 1013 W/n / ·  Makers visible under UV light / ·  Electrically insulating layer
·  Fluoresces under UV light to determine completeness of coverage
UV-1006S
Ultraviolet Curable Dielectric / 1014 W/n / ·  Printed insulation layers for
circuits
·  Busbar protection on EL & touch
screens / ·  UV curable, 100% solids
·  Touch, durable epoxy
·  Adheres to difficult substrates
such as ITO or other metal oxides
·  Screen or pad printable
UV-2530
Ultraviolet Curable Matte Dielectric / 1014 W/n / ·  PTF circuits
·  Printed insulation layers for
circuits / ·  Screen or pad printable
·  General purpose, matte finish
insulating material
·  UV curable, 100% solids
·  Available in clear, blue or green
colors
UV-2531
Ultraviolet Curable Glossy Dielectric / 5.0 x 1015W/n / ·  PTF circuits
·  Flexible circuit substrates
·  Printed insulation layers for circuits
·  Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches / ·  Glossy finish
·  Screen or pad printable
·  100% solids
·  Available in clear, blue or green colors
·  Low odor
UV-2534
Ultraviolet Curable Glossy Dielectric / 5.0 x 1015W/n / ·  Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
·  Overprint layer for carbon/graphite shielding layers / ·  Glossy finish
·  For difficult substrates, such as printed carbon inks
·  100% solids
·  Screen printable
·  Moisture resistant
·  Available in clear, blue or green colors
WB-101
Water Based Silver Conductive Ink / <0.025 W/n / ·  RFID tags
·  Cell phone antennas
·  Medical EEG/EKG sensors
·  EMI/RFI shielding / ·  Water based silver filled conductive ink
·  Gravure or rotary printable
·  Can be used to spray or coat
·  Low viscosity
·  High solids
·  Excellent for very thin film traces
·  Thermoplastic
·  Can crosslink for harder surface & stronger durability
·  Excellent adhesion to most substrates

Medical Products (above) (s:/website stuff/product chart)

Silver Inks
Product / Surface
Resistivity / Applications / Features
AG-800 / <0.015 W/n / ·  Flex circuits
·  Membrane switches
·  Additive circuits
·  EMI/RFI applications
·  Thermal targets / ·  Good conductivity
·  High speed screen or pad printing
·  Thin for spray or dipping
·  Can blend with carbon to customize resistance
·  Crease resistant
AG-500 / 0.02 W/n / ·  Used for EL panel bus bars on ITO
·  Touch screen bus bars
·  Difficult substrates
·  Flex circuits
·  Membrane switches
·  EMI/RFI shielding / ·  Screen printable
·  Wets out well and has better adhesion on ITO substrates
·  High conductivity
·  Thin for spray or dipping
·  Can blend with carbon to customize resistance
AG-510 / 0.015 W/n / ·  Membrane switches
·  Additive circuits
·  Printed Heaters
·  PTF Circuits
·  Defibrillator pads
·  EKG/EEG Electrodes
·  Blood glucose sensors
·  EMI/RFI applications
·  EL panels / ·  Polyester binder
·  Screen or pad printable
·  Fast drying
·  High conductivity
·  Thin for spray or dipping
·  Can blend with carbon to customize resistance
AG-755 / <0.008 W/n / ·  Flex circuits
·  Membrane switches
·  Additive circuits / ·  For fine line printing
·  Screen printable
·  Highest conductivity
·  Higher viscocity, minimal slumping
·  Excellent adhesion to metals
·  Can be thinned for spray or dipping
AG-530 / 0.01 W/n / ·  Touch Screen Bus Bars
·  Used for EL panels in ITO
·  Additive circuits / ·  Extremely flexible
·  Can blend with carbon to customize resistance
·  Excellent adhesion to polyester, polyimide, ITO, most textiles & porous substrates
AG-594 / <0.018 W/n / ·  Flex circuits
·  RFID & cell phone antennas
·  EEG/EKG/blood glucose disposable sensors
·  Additive circuits
·  EMI/RFI applications / ·  High speed gravure or flexo printing
·  For extremely thin line printing
·  Excellent edge definition
·  Excellent adhesion to most metal surfaces as well as polyester, polyimide & polycarbonate films
·  Can be thinned
AG-610 / 0.050 W/n / ·  Circuit traces or jumper repair
·  High speed dip coating / ·  Apply by syringe
·  Fast drying @ room or moderate temp
·  Thin for spray or dipping
WB-101 / <0.025 W/n / ·  RFID tags
·  Cell phone antennas
·  Medical EEG/EKG sensors
·  EMI/RFI shielding / ·  Water based silver filled conductive ink
·  Gravure or rotary printable
·  Can be used to spray or coat
·  Low viscosity
·  High solids
·  Excellent for very thin film traces
·  Thermoplastic
·  Can crosslink for harder surface & stronger durability
·  Excellent adhesion to most substrates
Carbon Inks
Product / Surface
Resistivity / Applications / Features
C-200 / 50 W/n / ·  Membrane switches
·  Overprint for silver conductive traces
·  Flex circuits
·  Additive circuits / ·  Vinyl based thermoplastic
·  Screen printable
·  Excellent adhesion to polyester & polyimide substrates
·  Not recommended on ITO
·  Can be blended with AG-800 for specific resistance values
·  Can be used as base electrode for EL panels
HTC-300 / 100 W/n / ·  PTF circuits
·  Printed Heater Circuits
·  Printed Rheostats
·  Flex circuits
·  Additive circuits / ·  Thermoplastic
·  Used for higher temperatures
·  Tough, durable surface finish
·  Screen printable, especially for fine line/fine pitch
·  Excellent adhesion to polyester & polyimide surfaces
·  Can be blended with silver filled ink for specific resistance values
HTC-350 / 100 W/n / ·  PTF circuits
·  Printed Heater Circuits
·  Printed Rheostats
·  Flex circuits
·  Additive circuits / ·  Crosslinked thermoset for even more solvent resistance and higher temperature stability than HTC-300
·  Tough, durable surface finish
·  Screen printable, especially for fine line/fine pitch
·  Excellent adhesion to polyester & polyimide surfaces
·  Can be blended with silver filled ink for specific resistance values
·  Additional baking time required
PTC-614 / <10 W/n / ·  Self -regulating printed heater circuits / ·  Positive Thermal Coefficient Inks are self-regulating & powered with low DC voltage
·  Operate in temperature range of 60-70 degrees C without feedback loop
·  Screen printable
·  Print treated polyester or polyimide substrates
·  AG-800 or AG-510 silver ink recommended for bus bar
C-774 / 30 W/n / ·  Membrane switches
·  Medical sensors
·  Heaters
·  Resistance pads
·  Overprint for silver conductive traces printed on polycarbonate substrate / ·  Screen printable
·  For use on polyester, polyimide and polycarbonate substrates
·  Excellent adhesion to most metal surfaces
·  Fast dry time in low temperature oven
·  Rheology can be adjusted

VRI Potentiometer Inks

Product / Surface
Resistivity / Applications / Features
VRI
Variable Resistance Carbon Ink / 1 – 100,000 W/n / ·  Rigid substrates such as FR-4, FR-3, ceramic, CEM-1, CEM-3 and other inorganic and organic material used for printed circuit assemblies
·  Potentiometers
·  Rheostats
·  Linear actuators
·  Wherever stable electrical resistance at higher temperatures is required. / ·  Variable resistance carbon inks for blending to achieve specific resistance values
·  Electrically conductive
·  Screen printable
·  Outstanding abrasion resistance
·  Temperature resistant
·  Precise and stabile resistance over time
UV Curable Products
Product / Surface
Resistivity / Applications / Features
UV-2530 / 5.0 x 1015W/n / ·  PTF circuits
·  Flexible circuit substrates
·  Printed insulation layers for circuits
·  Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches / ·  Matte finish
·  Screen or pad printable
·  100% solids
·  Available in clear, blue or green colors
·  Low odor
UV-2531 / 5.0 x 1015W/n / ·  PTF circuits
·  Flexible circuit substrates
·  Printed insulation layers for circuits
·  Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches / ·  Glossy finish
·  Screen or pad printable
·  100% solids
·  Available in clear, blue or green colors
·  Low odor
UV-2534 / 5.0 x 1015W/n / ·  Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
·  Overprint layer for carbon/graphite shielding layers / ·  Glossy finish
·  For difficult substrates, such as printed carbon inks
·  100% solids
·  Screen printable
·  Moisture resistant
·  Available in clear, blue or green colors
UV-3010 / 3.8 x1014W/n / ·  Component encapsulation
·  Printed circuit board protection / ·  100% solids
·  Dot dispensable
·  Moisture resistant
·  Suitable for flexible substrates
·  Can be sprayed or dipped
UV-1006S / 2.9 x1013W/n / ·  Printed insulation layers for circuits
·  Touch screens
·  El panels
·  Flexible printed substrates / ·  100% solids
·  Adheres to difficult substrates such as ITO or other metal oxides
·  Screen or pad printable
UV-772 / 2.9 x 1013 W/n / ·  Makers visible under UV light / ·  Electrically insulating layer
·  Fluoresces under UV light to determine completeness of coverage

(UV Phosphor binder- Not yet to be added)