ULTRALATTICE Driftwood Embossed Open Roof Pergolas/Trellises
With Kynar 500 paint finish
INFO & DESIGN GUIDELINES06/24/16
7Stocking colors:
WhiteIvoryAdobeWheatBrownSand Beige
4END CAP CHOICES:
Standard Lattice shade covers are figured :
-with 2” x 6-1/2” x .024 ga rafters… (option for .032” rafters)
-with the first and last rafter inset 12” from ends of support beam
-with the remaining 2” x 6-1/2” rafters typically spaced @24” o.c.
-with the 2” x 6-1/2” rafters
overhanging the 3” x 8” beam@12”
-with a single 3” x 8” x .042 support beam
-with 2” x 2” shade-pickets the same length as the 3 x 8 support beam
-with 2” x 2” lattice
pickets spaced for approx. 60% MAXIMUM shade@4” o.c.
which = 2” space between pickets
Other shading options are:
Other shading options :
-with lattice pickets spaced
for approx. 50% shade- suggested for snow load areas@6” o.c.
which =4” space between pickets
OR
-with lattice pickets spaced
for approx. 40% shade@8” o.c.
which =6” space between
pickets
DESIGN SUGGESTIONS AND OPTIONS
~Rafters project outward perpendicular to the house
~RUN PICKETS & SUPPORT BEAMS PARALLEL WITH THE HOUSE
~UPSELL BY USING Decorative COLUMNS
WITH CAP & BASE (not the standard lattice posts)
WE SUGGEST USING A DOUBLE 3 X 8 SUPPORT BEAM WHEN
USING COLUMNS.
THE CAPS AND BASES FOR AN 8” Aluminum COLUMN WILL BE CLOSE TO 9”.
A SINGLE 3” BEAM ATOP A COLUMN WITH CAP DOES NOT LOOK
PROPORTIONAL.
USING A DOUBLE BEAM BUILDS IT OUT TO 9” WIDE, SITTING ATOP
THE COLUMN & CAP LOOKS BETTERPROPORTIONALLY.
~DOUBLE BEAM – DOUBLE RAFTER
INSTEAD OF SPACING SINGLE RAFTERS 24” o.c., YOU CAN
DOUBLE UP THE RAFTERS* WITH A 3” FLOATER POST BETWEEN RAFTERS
ANDSPACE @ 48” O.C. (*depending on width of structure
you might need to purchase one extra rafter and accessories)
THE DOUBLE RAFTERS CAN BE SUPPORTED EITHER ON TOP OF
THE DOUBLE BEAM OR SUSPENDED BELOW THE DOUBLE BEAM.
~DESIGN SHAPE INTOTHE SHADE STRUCTURE
VARY THE LENGTH OF RAFTERS AND PICKETS TO DESIGN
A UNIQUE SHAPE INTO THE LATTICE STRUCTURE.
~HEAVY DUTY BIG & BEEFY – COMMERCIAL LOOK
USE DOUBLE 3” X 8” SUPPORT BEAMS AND 3” X 8” AS RAFTERS
WITH 2” PICKETS OR 3” X 3” TUBE FOR PICKETS.