02/13/17
CED / BAKERY
DEPARTMENT
Minimal Acceptable Standards / REVISION
0
xx/xx/xx
1B02 / Display case, non-refrigerated, clerk served / PAGE 1of3
1Purpose of this Equipment: To display non-refrigerated bakery products to commissary patrons on a sales floor. This unit is clerk serviced.
2Federal Supply Class: 7310
3General Operating Specifications:
3.1Dimensions:
3.1.11B02-A: 48 inches long / wide, 38 inches deep, 48 inches high.
3.1.21B02-B: 59 inches long / wide, 38 inches deep, 48 inches high.
3.1.31B02-C: 77 inches long / wide, 38 inches deep, 48 inches high. Dimensional sizes, such as length, width, and height serve as a general guide to keep this equipment sized for available space.
3.2Salient Characteristics that shall be provided:
3.2.1Welded base construction
3.2.2Steel interior
3.2.3Laminated exterior
3.2.4Mirrored interior ends
3.2.5Glass ends and rear doors
3.2.6Sloped rear doors to allow product access
3.2.7Removable sliding rear doors
3.2.8Four levels of interior display
3.2.9Removable shelf lights, shelf supports, shelves
3.2.10Shelves adjustable up and down
3.2.11Shelves shall be able to be tilted
3.2.12Front glass shall be double curved
3.2.13Front glass shall be tempered
3.2.14Front glass shall be double-bend type
3.2.15Front glass shall lift up with pneumatic cylinders
3.2.16High performance T8 fluorescent lighting or LED
3.2.17Lights shall be shielded
3.2.18Vent system to reduce heat accumulation
3.2.19Four point leveling system
3.2.20Control panel
3.3Industry Standards / Requirement(s):
3.3.1Industry Standards: Underwriters Laboratory (UL) listed and National Sanitation Foundation (NSF) certification, or approved equivalent. CE is not acceptable for a standard.
3.3.2Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4Information Technology requirements: N / A
3.5Color Requirement(s): Black or Brown.
4Electrical Requirements:
4.1_____ Standard U.S.A. electrical specifications: 120 volts, 60 Hertz, 1 phase
4.2_____ Pacific Theaterstores 120 V / 50 HZ / 1 PH (Applies to these stores only: Atsugi, Misawa, Sagami, Sagamihara, Yokosuka, Yokota, Camp Zama, and Kanto Plains CDC. All other stores are standard U.S.A. 60 cycle voltages.)
4.3Minimum 6 foot cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements.
4.4NOTE:the operating range for 120 volts is 110 to 120 volts; the operating range for 220 volts is 208 to 230 volts.
5Standard ContractorRequirements:
5.1Must be shipped ready to assembleand use
5.2De-installation of old equipment is required
5.3This equipment requires disposal: place in a specified area, contact HQ property accountability POC and HQ liquidation manager for disposition instructions
5.4Installation required by an authorized service technician
5.5Operational testing is required
5.6Startup assistance required
5.7Information to be provided bythe Contractorto the commissary at the time of delivery:
5.7.1Point of Contact for Service
5.7.2Installation and Operating Instructions
5.7.3Parts List
5.8Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6Special Coordinating / Safety Instructions: N / A
STORE ORDER REQUEST
STORE NAME: ______DODAAC: ______
FY16r.01