Kimberly-Clark Professional November 2014
1400 Holcomb Bridge Road
Roswell, Georgia 30076
Toll Free 800-241-3146 US
Toll Free 800-437-8979 CANADA
Website www.kcprofessional.com
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The CSI Construction Specifications Practice Guide.
This section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.
Section numbers and titles are based on MasterFormat 2014 Update.
SECTION 10 28 13
TOILET ACCESSORIES
Specifier Notes: This section covers Kimberly-Clark Professional toilet accessories. Consult Kimberly-Clark Professional for assistance in editing this section for the specific application.
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Toilet Accessories:
Specifier Notes: List toilet accessory categories specified in Part 2 of this section. Delete toilet accessory categories not specified.
1. Automatic door handle disinfectant dispensers.
2. Bathroom tissue dispensers.
3. Hand towel dispensers.
4. Folded towel dispensers.
5. Skin care dispensers.
1.2 RELATED REQUIREMENTS
Specifier Notes: Edit the following list of related sections as necessary. Limit the list to sections with specific information that the reader might expect to find in this section, but is specified elsewhere.
A. Division 26 – Electrical: Electrical for toilet accessories requiring AC power.
1.3 REFERENCE STANDARDS
Specifier Notes: List reference standards used elsewhere in this section, complete with designations and titles.
A. ADA Standard 28 CFR Part 36 – ADA Standards for Accessible Design.
1.4 PREINSTALLATION MEETINGS
Specifier Notes: Edit preinstallation meetings as necessary. Delete if not required.
A. Convene preinstallation meeting [1 week] [2 weeks] before start of installation of toilet accessories.
B. Require attendance of parties directly affecting work of this section, including Contractor, Architect, and installer.
C. Review the Following:
1. Materials.
2. Installation.
3. Adjusting.
4. Cleaning.
5. Demonstration.
6. Protection.
7. Coordination with other work.
1.5 SUBMITTALS
Specifier Notes: Edit submittal requirements as necessary. Delete submittals not required.
A. Comply with Section 01 33 00 – Submittal Procedures.
B. Product Data: Submit manufacturer’s product data for each toilet accessory, including:
1. Materials.
2. Colors.
3. Dimensions.
4. Operating and dispensing characteristics.
5. Power requirements.
6. Installation instructions.
C. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.
D. Manufacturer’s Project References: Submit manufacturer’s list of successfully completed toilet accessory projects, including project name and location, name of architect, and type and quantity of toilet accessories furnished.
E. Operation and Maintenance Data:
1. Submit manufacturer’s operation and maintenance manual for each toilet accessory, including:
a. Operation, maintenance, adjustment, and cleaning instructions.
b. Troubleshooting guide.
c. Parts list.
d. Electrical wiring diagrams, if applicable.
2. Provide detailed information required for Owner to properly operate and maintain equipment.
F. Warranty Documentation: Submit manufacturer’s standard warranty.
1.6 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: Manufacturer regularly engaged, for a minimum of 10 years, in the manufacturing of toilet accessories of similar type to that specified.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Delivery Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
B. Storage and Handling Requirements:
1. Store and handle materials in accordance with manufacturer’s instructions.
2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.
3. Store materials in clean, dry area indoors.
4. Protect materials and finish during storage, handling, and installation to prevent damage.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Manufacturer: Kimberly-Clark Professional, 1400 Holcomb Bridge Road, Roswell, Georgia 30076. Toll Free 800-241-3146 US. Toll Free 800-437-8979 CANADA. Website www.kcprofessional.com.
Specifier Notes: Specify if substitutions will be permitted.
B. Substitutions: [Not permitted] [In accordance with Division 1].
C. Single Source: Provide materials from single manufacturer.
2.2 AUTOMATIC DOOR HANDLE DISINFECTANT DISPENSERS
A. Automatic Door Handle Disinfectant Dispensers: Kimberly-Clark Professional* automatic door handle disinfectant dispensers.
Specifier Notes: Specify code and color required. Delete codes and colors not required.
1. Code: 35563.
a. Color: Brushed Metallic.
2. Code: 35578.
a. Color: White.
3. Code: 35566.
a. Color: Black.
4. Eliminates 99.9 percent of common bacteria and viruses on handle surfaces.
5. Mounts on door above handle.
6. Size: 7.40 inches by 4.37 inches by 2.64 inches.
7. Refill Canister:
a. Lasts up to 100 days.
b. Approximately 800 sprays per canister.
c. No CFCs.
d. Recyclable.
8. Lock: Prevents unwanted access.
9. Power:
a. Batteries: 3 AA-size, alkaline.
b. Approximately 8,000 sprays per set of batteries.
10. Programming Control Panel: LCD display.
11. On/Off switch.
12. Day/24H switch.
a. Day Position: Unit powers down when lights are off.
b. 24H Position: Unit operates 24 hours per day.
13. 15/30/60 Switch: Sets unit to spray every 15, 30, or 60 minutes.
14. Reset Button:
a. Test spray.
b. Reset LCD refill canister status.
15. Light Sensor: Allows unit to power down when lights are off (Day setting).
16. Red Warning Light:
a. Flashes when proximity sensor detects person or object, to indicate that unit will not spray.
b. Flashes when refill canister needs to be replaced.
17. Battery life indicator.
18. Refill canister status.
2.3 BATHROOM TISSUE DISPENSERS
A. Bathroom Tissue Dispensers: Kimberly-Clark Professional* “MOD*” ez-load coreless jumbo roll tissue junior bathroom tissue dispensers.
Specifier Notes: Specify code and color required. Delete code and color not required.
1. Code: 34831.
a. Color: Black.
2. Code: 34832.
a. Color: White.
3. Operation: Dispenses 9.38-inch-diameter by 3.8-inch-wide tissue roll, plus stub roll.
4. Compliance: ADA Standard 28 CFR Part 36.
5. Size: 14.13 inches by 10.39 inches by 5.87 inches.
6. Material: High-impact plastic.
7. Housing Cover:
a. Center: Match unit color.
b. Sides: Smoked translucent.
8. Housing Back: Opaque black.
9. Plunger.
10. Tear-Off Bars: Both sides of dispenser opening.
11. Door: None.
12. Key: None.
13. Core: None.
B. Bathroom Tissue Dispensers: Kimberly-Clark Professional* “REFLECTIONS” ez-load coreless jumbo roll tissue bathroom tissue dispensers.
1. Code: 09601.
2. Color: Stainless steel.
3. Operation: Dispenses 9.38-inch-diameter by 3.8-inch-wide tissue roll, plus stub roll.
4. Compliance: ADA Standard 28 CFR Part 36.
5. Size: 14.25 inches by 9.75 inches by 6.0 inches.
6. Material: Stainless steel.
7. Window: Clear transparent.
8. Tear-Off Bars: Both sides of dispenser opening.
9. Door: None.
10. Key: None.
11. Core: None.
C. Bathroom Tissue Dispensers: Kimberly-Clark Professional* “MOD*” ez-load coreless jumbo roll tissue twin bathroom tissue dispensers.
Specifier Notes: Specify code and color required. Delete codes and colors not required.
1. Code: 39730.
a. Color: White.
2. Code: 39731.
a. Color: Black.
3. Code: 39732.
a. Color: Brushed Metallic.
4. Operation: Dispenses two 9.38-inch-diameter by 3.8-inch-wide tissue rolls.
5. Compliance: ADA Standard 28 CFR Part 36.
6. Size: 20.25 inches by 6.25 inches by 11.60 inches.
7. Material: High-impact plastic.
8. Housing Cover:
a. Center: Match unit color.
b. Sides: Smoked translucent.
9. Housing Back: Opaque black.
10. Sliding Roll Cover: Keeps 1 roll isolated and unusable until other roll is sufficiently depleted.
11. Plunger.
12. Tear-Off Bars: Both sides of dispenser opening.
13. Door: None.
14. Key: None.
15. Core: None.
D. Bathroom Tissue Dispensers: Kimberly-Clark Professional* “MOD*” hygienic bathroom tissue dispensers.
Specifier Notes: Specify code and color required. Delete codes and colors not required.
1. Code: 40407.
a. Color: White.
2. Code: 39728.
a. Color: Black.
3. Code: 39729.
a. Color: Brushed Metallic.
4. Operation: No-touch dispensing.
5. Size: 7.00 inches by 5.725 inches by 13.339 inches.
6. Material: High-impact plastic.
7. Housing Cover:
a. Center: Match unit color.
b. Sides: Smoked translucent.
8. Housing Back: Opaque black.
9. Capacity: 2 full and 1 partial clip of product.
10. Open Cover: Key-activated spring lock or pushbutton operation.
11. Front Cover: Hinged.
12. Overfill Mechanism: Minimize tears and tabs when dispenser is overfilled.
E. Bathroom Tissue Dispensers: Kimberly-Clark Professional* coreless double-roll bathroom tissue dispensers.
Specifier Notes: Specify code and color required. Delete code and color not required.
1. Code: 09604.
a. Color: Smoke.
2. Code: 09605.
a. Color: White.
3. Compliance: ADA Standard 28 CFR Part 36.
4. Size: 11.0 inches by 7.63 inches by 6.0 inches.
5. Material: Plastic.
6. Front Cover:
a. Sliding.
b. Transparent.
7. Capacity: 2 full, standard rolls of coreless tissue.
8. Loading: One-hand loading with no movable parts.
9. Key: None.
10. Core: None.
F. Bathroom Tissue Dispensers: Kimberly-Clark Professional* coreless double-roll bathroom tissue dispensers.
1. Code: 09606.
2. Color: Stainless steel.
3. Size: 10.13 inches by 7.13 inches by 6.38 inches.
4. Cover and Sliding Door with Folded Edges:
a. 24-gauge brushed stainless steel.
b. Attached to plastic housing with hinge pins.
5. Back and Arms: Plastic.
6. Capacity: 2 full, standard rolls of coreless tissue.
7. Open Cover: Key-activated spring lock or pushbutton operation.
8. Front Cover: Hinged.
9. Core: None.
2.4 HAND TOWEL DISPENSERS
A. Wall Units with Trash Receptacle: Kimberly-Clark Professional* “MOD*” recessed wall units with trash receptacle.
1. Code: 35370.
2. Material: 20-gauge brushed stainless steel.
3. Construction: Welded construction, seamless corners, and burr-free edges.
4. Size: 17.13 inches by 56.00 inches by 9.25 inches.
5. Trash Container:
a. Capacity: 9.22 gal.
b. Leakproof.
c. Hidden behind reversible stainless steel door that can be flipped to change swing direction.
B. Hard-Roll Towel Dispenser Housings: Kimberly-Clark Professional* “MOD*” recessed hard-roll towel dispenser housings.
1. Code: 31501.
2. Material: 22-gauge brushed stainless steel.
3. Size: 13.97 inches by 16.10 inches by 4.88 inches.
C. Hard-Roll Towel Dispenser Housings: Kimberly-Clark Professional* “MOD*” recessed hard-roll towel dispenser narrow housings.
1. Code: 31498.
2. Material: 22-gauge brushed stainless steel.
3. Size: 10.75 inches by 15.37 inches by 4.0 inches.
D. Hard-Roll Towel Dispensers: Kimberly-Clark Professional* “MOD* NG” electronic hard-roll towel dispensers.
1. Code: 34374.
2. Material: 22-gauge brushed stainless steel.
3. Size: 17.62 inches by 22.0 inches by 5.38 inches.
4. Dispensing:
a. Touchless.
b. Advances and cuts a nominal 11.75 inches of towel when activated.
c. One 8-inch-diameter roll of 700-foot or 1,150-foot product, plus stub roll using core-plug mounting.
5. Operating Modes:
a. Motor-Assist Mode: Slight pull on hanging sheet starts motor to drive out and cut sheet.
b. Hanging Mode: Full sheet is exposed for user to remove with light pull. Hanging sheet is automatically replenished following variable delay, if any.
6. Dispensing Delay Settings:
a. No delay after each dispense, delay after each dispense, or delay after 2 dispenses.
b. Variable delay time.
7. Lock: Key activated.
8. Power:
a. Batteries: 4 D-size, alkaline.
Specifier Notes: Specify optional AC adapter, if required.
b. AC adapter.
E. Hard-Roll Towel Dispensers: Kimberly-Clark Professional* “MOD* NG” electronic hard-roll towel dispensers.
Specifier Notes: Specify code and color required. Delete codes and colors not required.
1. Code: 35613.
a. Color: Brushed Metallic.
2. Code: 34371.
a. Color: White.
3. Code: 34370.
a. Color: Black.
4. Size: 12.66 inches by 16.44 inches by 9.18 inches.
5. Material: High-impact plastic.
6. Housing Cover:
a. Center: Match unit color.
b. Sides: Smoked translucent.
7. Housing Back: Opaque black.
8. Dispensing:
a. Touchless.
b. Advances and cuts a nominal 11.75 inches of towel when activated.
c. One 8-inch-diameter roll of 700-foot or 1,150-foot product, plus stub roll using core-plug mounting.
9. Operating Modes:
a. Motor-Assist Mode: Slight pull on hanging sheet starts motor to drive out and cut sheet.
b. Hanging Mode: Full sheet is exposed for user to remove with light pull. Hanging sheet is automatically replenished following variable delay, if any.
10. Dispensing Delay Settings:
a. No delay after each dispense, delay after each dispense, or delay after 2 dispenses.
b. Variable delay time.
11. Power:
a. Batteries: 4 D-size, alkaline.
Specifier Notes: Specify optional AC adapter, if required.
b. AC adapter.
12. Open Cover: Key-activated spring lock or pushbutton operation.
F. Hard-Roll Towel Modules: Kimberly-Clark Professional* “MOD* NG” electronic hard-roll towel modules.
1. Code: 34376.
2. Dispensing:
a. Touchless.
b. Advances and cuts a nominal 11.75 inches of towel when activated.
c. One 8-inch-diameter roll of 700-foot or 1,150-foot product, plus stub roll using core-plug mounting.
3. Operating Modes:
a. Motor-Assist Mode: Slight pull on hanging sheet starts motor to drive out and cut sheet.
b. Hanging Mode: Full sheet is exposed for user to remove with light pull. Hanging sheet is automatically replenished following variable delay, if any.
4. Dispensing Delay Settings:
a. No delay after each dispense, delay after each dispense, or delay after 2 dispenses.
b. Variable delay time.
5. Power:
a. Batteries: 4 D-size, alkaline.
Specifier Notes: Specify optional AC adapter, if required.
b. AC adapter.
G. Hard-Roll Towel Dispensers: Kimberly-Clark Professional* “MOD*” electronic hard-roll towel dispensers.
1. Code: 34373.
2. Material: 22-gauge brushed stainless steel.
3. Size: 17.62 inches by 22.0 inches by 5.38 inches.
4. Dispensing:
a. Touchless.
b. Single sheet of paper with each cycle.
c. One 8-inch-diameter roll of 700-foot or 1,150-foot product, plus stub roll using core-plug mounting.
5. Operating Modes:
a. Hidden Mode: Dispenses single sheet of paper when hand of user is placed beneath dispenser.
b. Hanging Mode: Full sheet is exposed for user to tear off. Hanging sheet is automatically replenished following variable delay.