Section 12-4.02C(3)(M). Use for a City Street Closure

12-4.02C(3)(m)_A07-21-17__2015

Page 1 of 1

Section 12-4.02C(3)(m). Use for a city street closure.

Edits do not require the approval of the specification owner but must be verified by the transportation management plan manager or district traffic manager.

Do not duplicate the revision clause for multiple charts. Each chart must have a unique chart number, not a duplicate number from another section.

Edit the introductory clause and chart title for the type of closure. Insert complete city street closure or city street lane closure in the introductory clause. For the chart title, insert Complete City Street Closure Hours for a complete city street closure or City Street Lane Requirements and Hours of Work for a lane closure on a city street with multiple lanes.Insert the chart number, starting with M1. Use additional charts as needed and number them M2, M3, M4, etc. Change chart to charts if additional charts are added.

Replace Reserved in section 12-4.02C(3)(m) with:

Comply with the requirements for a ______shown in the following chart:

Chart No. __
______
Location: / Direction:
Closure limits:
Hour / 00 / 01 / 02 / 03 / 04 / 05 / 06 / 07 / 08 / 09 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24
Mon–Thu
Fri
Sat
Sun
Legend:
Do not use shading or crosshatching. Half-hour increments can be accomplished by splitting the appropriate cell. Place the cursor inside the cell, right click on the mouse, and select Split Cells.
1 / Provide at least 1 city street lane open in the direction of travel.
C / Street may be closed.
N / No work is allowed.
R / Provide at least 1 through traffic lane not less than 10 feet in width for use by both directions of travel.
(Reversing Control)
Insert the number of through traffic lanes.
REMARKS: The number of through traffic lanes in each direction of travel is __.