Winger Carrying Case - A nylon carrying case to fit your Zinger Winger will extend the life of the rubber tubing and pouch while keeping the more sensitive electrical components free from moisture, dirt and exposure to the elements.

ReceiverLok™ - This universal "Receiver Anchoring System" will eliminate the aggravation of securing and removing your remote receiver from the launcher. Attach and remove the remote receiver quickly and easily without tools or mechanical fasteners. Made from a tough molded plastic ReceiverLok™ attaches to your receiver using a high quality adhesive tape. Never worry about Velcro straps, lost bolts and broken snaps again. Sold in packs of 6 (enough for 3 launchers and 3 receivers).

Dogtra RX Mounting Plate – This plate will accept your Dogtra receiver and attach to your winger using the same hole configuration as the Tritronics Pro Control. Comes complete with powder coated steel plate and button snaps.

Replacement Hinges - Sold as a left and right pair these original Zinger Winger hinges are nicked plated and assembled with a stainless steel machine screw and lock nut for strength and durability. Replaces all original Zinger Wingers.

Pins and Lanyards - These pins and lanyards replace the original support arm pin on all Zinger Wingers. Sold in packs of 2.

Rubber Kits – These rubber kits replace the rubber tubing on all Zinger Wingers. The black rubber is made to fit perfectly through the wingers’ pulleys for better performance. The thick walls provide the incredible stretch that is required to propel the birds high and far. Each kit consists of 4 rubber bands cut to length and include the ties required to attach the rubber to the pouch and rings.

Bird Restraint Pouch - If you train with a Zinger Winger and use live birds from time to time this pouch allows you to keep those slippery devils in place while you get your dog ready to run. The birds are held in place by 2 Velcro straps that strip loose once the winger is launched. Great for getting the dogs really excited. Will work on pigeons, quail, pheasants and ducks.

Vinyl Pouch - One size fits all Zinger Wingers. Made from heavy-duty vinyl these pouches will withstand years of wear and tear. Nylon straps are sewn along the edges and crisscross the center to reinforce and give the pouch the strength it needs. The 5 heavy brass grommets that hold the rubber tubing and release bolt will not rust or pull out. Available with optional live bird restraint.

Nylon Mesh Pouch - One size fits all Zinger Wingers. Made from nylon mesh fabric these pouches will withstand years of use in the field. Nylon straps are sewn along the edges and crisscross the center to reinforce and give the pouch the strength it needs. The 5 heavy brass grommets that hold the rubber tubing and release bolt will not rust or pull out.

Servo – this servo will operate with your Dogtra or Tritronics remote release electronics. Comes with pre-wired bullet connectors.