/ Public
PRODUCT REVISION INFORMATION / 1 (3)
Prepared (also subject responsible if other) / No.
CoE MX-ONE Marie Lundmark / 109 21-DPA 200 50+-2 Uen
Approved / Checked / Date / Rev / Reference
CoE MX-ONE (M. Lundmark) / 2010-01-28 / A
Document category: / Document No.: / R-state / from / to
Circuit Revision Information / 1/109 21- / R2A / R2B
Material Revision Informaion / 2/109 21-
Wiring Revision Information / 3/109 21-
Revision state of product documents after revision, see 1095-

DT390 Cordless Phone

1Reason for revision

HW corrections:

a.None

SW corrections:

Corrections

  • Messages were not received correctly from NerveCenter SMS Server
  • Group numbers were not displayed correctly
  • AC code was required to be at least 4 digits
  • Wrong display info (CLIP) after transfer
  • Solved error that resulted in Service needed Error code 2, Error code 3 or Error code 4.
  • Switching between systems when using “Automatically” detection sometimes failed.
  • Import of contacts sometimes ended up with 'Sync error'
  • Backlight lighted up when walking around in MX_ONE systems
  • Handset rarely did not log in to winPDM/CPDM.
  • Carrier 4 for Brazil DECT removed.
  • Call time was added twice to total call time causing wrong total call time.

Improvements

  • Possible to make new call from contacts when in existing call
  • Speed dial
  • Improved muting algorithm (better performance in reflective environments)
  • Several improvements to Bluetooth stability
  • New setting for sound characteristics that works better in noisy environments
  • Automatic call termination in feature access codes
  • Phone book icon on middle soft key in idle-screen
  • Possible to put a shortcut to “Call services”
  • Possible to put a shortcut to absence menu
  • Information about product name at start up
  • Translation improvements
  • Possible to set sound off in charger
  • Possibility to select number from phonebook in Diversion menu added.
  • Progress bar updated more frequently when updating phone in charger using winPDM
  • Possibility to configure auto hook on for call services.
  • The handset can be configured to establish calls via encrypted base stations only.

2Technical solution

  1. None.
  2. SW is updated from 2.8.19 to 3.0.5

3Products concerned

DPA 200 50/1 R2A changed to R2B

DPA 200 51/1 R2A changed to R2B

4Other products concerned

Regarding upgrade, the following procedure for migrating from old to new software baseline is recommend.

  1. Upgrade Advanced charger to 1.3.11
  2. Upgrade WinPDM/CPDM to 3.5.4/2.54
  3. Upgrade telephones to 3.0.5

5Limitations in this version of SW

Compatibility

  • This software can be used in all existing handsets.
  • Aastra WinPDM software version 3.3.5 is required for parameter editing, company phone book and downloadable languages.
  • CPDM software version 2.3X is required for parameter editing, company phone book and downloadable languages.
  • The software of desk PDM and Rack PDM must be of version 1.3.7 or above for Easy Replacement functionality.
  • Message inbox and Call list will be cleared when updating to this software.

Other

Support for new display driver and new revision of Bluetooth module.

6Recommended measures

The revision is to be introduced in new manufacturing only.

7Reference

HWRM meeting No. xx 2010. ECO300304