Declaration of Performance
accord. Annex III of Regulation (EU) No. 305/2011
for the product
Rigips Rifix Ansetzbinder
1 Unique identification code of the product-typeRigips Rifix Ansetzbinder_LE_0613
2 Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4)
See section 1. For unique identification see date and time of manufacturing on the imprint
3 Intended use or uses of the construction product, in accordance with the applicable harmonized technical specification, as foreseen by the manufacturer
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards accord. EN 14496
4 Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11(5)
Saint-Gobain Rigips Austria GesmbH
Wiener Neustädter Straße 63
A-2734 Puchberg
5 Where applicable, name and contact address of the authorised representative whose
mandate covers the tasks specified in Article 12(2)
See section 4
6 System or systems of assessment and verification of constancy of performance of
the construction product as set out in Annex V
System 4
7 In case of the declaration of performance concerning a construction product covered by
a harmonised standard:
The manufacturer has performed an initial type testing and the factory production control
complies with EN ISO 9001:2008.
8 In case of the declaration of performance concerning a construction product for which
a European Technical Assessment has been issued:
Not relevant
9 Declared performance
Essential characteristics / Performance / Harmonised technical specification
Reaction to fire / Class A1 / EN 14496
Adhesiveness / ≥ 0,25 MPa / EN 14496
Dangerous substances / NPD / EN 14496
10 The performance of the product identified in points 1 and 2 is in conformity with the
declared performance in point 9. This declaration of performance is issued under the
sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
─────────────────────────────────────────────────────────
(Name and function)
──────────────────── ──────────────────────────────
(Place and date of issue) / (Signature)
Saint-Gobain Rigips Austria GesmbH • Wiener Neustädter Straße 63 • 2734 Puchberg
Telefon 02636/2203-0 • www.rigips.com • Stand: 26.02.13
Seite 1 von 2