The way of Installing and Uninstalling the SAMSUNG USB Modem Driver

# Instruction to installing SAMSUNG CDMA USB Modem driver

1. If you have the SAMSUNG CDMA USB Modem driver, please unzip this file and save the file to your favorite folder.

2. Don’t connect USB cable to your lap-top up to here.

3. Double click the ‘Setup.exe’ file

- Click ‘Next’ button

- Click ‘Finish’ button

3. Be sure that the mobile and the PC are not connected with USB cable.

Connect the mobile to PC with the USB cable, then you will see the following window:

4. It will be automatically installed.

5. If you want to make sure that the driver is correctly installed, open ‘Device Manager’.

You should be able to see "SAMSUNG CDMA Modem" under "Modems" item, "SAMSUNG CDMA Modem " and “SAMSUNG USB Composite Device” under "Universal Serial Bus controllers"

That’s all..

Following that, I will introduce an uninstalling method with “SAMSUNG CDMA Modem driver”

# Instruction of uninstalling SAMSUNG CDMA USB Modem driver

1. If your USB cable has been connected to your PC, you have to pull that out of your PC.

2. If SAMSUNG CDMA USB Modem has been installed your PC, you can

see the following folder. (It will automatically generated when you install

the Modem driver )

- see the next folder

C:¥Program Files¥SAMSUNG CDMA Modem¥drivers

- Double Click the following file

SSCDUninstall.exe

3. The following message will be appeared continually

- click the ‘Next’ button

- click the ‘Finish’ button

- If you want to delete SAMSUNG CDMA USB Modem driver clearly,

press the ‘Yes’ button.

Then your PC will be automatically restarted..

4. That’s all…

Is it very easy? Don’t you think so ?

If you have any question or any problem, reach me at this e-mail :

My e-mail :

My name : LEE WON JU (English name : William Lee)

I’ll get back to you as soon as possible.

Thanks for your reading….

Note :

This document is written in my PC, using a Windows 98.

Sometimes many different occasions may be happen up to every single PC.

Mobile Communication Division, Group 1, R&D Team, Written by William Lee