8-3-13 / [PROJECT LOCATION]
SECTION 28 23 19
DIGITAL VIDEO RECORDERS AND ANALOG RECORDING DEVICES
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Digital Video Recorder for closed circuit television (CCTV) video surveillance system.
1.02 RELATED SECTIONS
A. 01 80 00 Performance Requirements
B. 26 05 00 Common Work Results for Electrical
C. 26 41 00 Electrical and Cathodic Protection
D. 26 50 00 Lighting
E. 28 01 00 Operation and Maintenance of Electronic Safety and Security
F. 28 05 00 Common Work Results for Electronic Safety and Security
G. 28 06 00 Schedules for Electronic Safety and Security
H. 28 10 00 Electronic Access Control and Intrusion Detection
I. 28 20 00 Electronic Surveillance
J. 28 23 00 Video Surveillance
K. 28 30 00 Electronic Detection and Alarm
L. 28 40 00 Electronic Monitoring and Control
1.03 REFERENCES
A. Abbreviations
1. BNC Bayonet Neill–Concelman
2. CCTV Closed Circuit Television
3. CE Conformité Européenne / European Conformity
4. DVD-RW Digital Video Disc - ReWritable
5. DVR Digital Video Recorder
6. FCC Federal Communications Commission
7. g grams
8. in Inch
9. lbs Pounds
10. LAN Local Area Network
11. mm Millimeter
12. NTSC National Television System Committee
13. NVR Network Video Recorder
14. PAL Phase Alternating Line
15. PTZ Pan Tilt Zoom
16. TV Television
17. USB Universal Serial Bus
18. VAC Volts Alternating Current
19. VDC Volts Direct Current
B. Reference Standards
1. UL 2044 Commercial Closed Circuit Television Systems
2. FCC Part 15 Radio Frequency Radiators
1.04 DELIVERY, STORAGE AND HANDLING
A. Deliver materials in unopened factory packaging with manufacturer’s bar coding to the project site.
B. Inspect product upon delivery to assure that specified product has been received.
C. Store in original packaging in a climate controlled environment. Storage temperatures in accordance with Product Specifications below.
1.05 PROJECT/SITE CONDITIONS
A. Temperature requirements in accordance with Product Specifications below.
B. Unit is designed for indoor use only.
C. Keep all liquids away from the DVR / NVR.
1.06 WARRANTY
A. 2 year (24 month) manufacturer warranty.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. As manufactured by Aventura Technologies, Inc., 180 Adams Ave, Hauppauge, NY 11788, tel 631-300-4000, fax 631-434-7000, email , web aventuracctv.com
2.02 DESCRIPTION
A. H.264 Embedded Standalone NVR
1. Shall record 16 IP cameras @ 4 CIF @ 30fps
2. Shall support PTZ cameras
3. Shall be ONVIF & PSIA Compliant
4. Shall include DVD-RW burner
2.03 MANUFACTURED UNITS
MODELDHN-16H
2.04 SPECIFICATIONS: MANUFACTURED UNITS SHALL BE EQUIPPED WITH THE COMPONENTS NOTED AND SHALL HAVE THE ATTRIBUTES AS NOTED BELOW
A. General
1. Construction
a. Unit Weight 8 lbs (3.6g)
b. Dimensions 3.5" H x 17.5" W x 18.5" D (90 x 445 x 470 mm)
c. Chassis Type standalone / 2U Rackmount
B. Audio/ Video
1. IP Video Channels Up to 16
2. Two Way Audio Input 2-ch BNC (2.0Vp-p 1 kΩ)
3. Analog Video Output 2 - BNC (1.0Vp-p 75 Ω) NTSC/PAL
4. Digital VGA Output 1024×768@60/70Hz, 1280×1024@60Hz
5. Digital HDMI Output 1024×768,1280×1024,1920×1080 (1080p)@60Hz
6. Audio Output 2 ch, BNC (2.0Vp-p 600 Ω)
7. Video Compression H.264
8. Record Resolution 1080p (8 ch @ 15fps or 4ch @30fps),
720p 8 ch @ 30 fps),
4 CIF (16ch @30 fps)
9. Video Bit Rate 32kbps – 2048 kbps, or user defined (Max. 16384
Kbps)
10. Synchronous Playback 16 ch
C. Storage
1. On Board 1 Tb
2. Max Storage Up to 16Tb
3. Removable Media DVD-RW
D. Communications
1. LAN 10/100 Ethernet
2. Record Rate Up to 30 fps @ 16Mbps
3. Audio Bit Rate 16 kbps
4. USB Interface 3 - USB 2.0
5. Input Device USB Mouse or Remote Control
6. PTZ Control RS-232/485 Interface
7. Alarm Inputs / Outputs 16 /4
E. Software Included
1. Video Management
2. Central Management
3. Remote Client Software
4. Web Client
5. Smartphone
F. Electrical Specifications
G. Power Source 100-240V AC (12V DC Transformer)
H. Environmental Specifications
1. Environment Indoor
3. Operating Temperature +14 to +131 degrees F
(-10 to +55 degrees C)
I. Regulatory Type
1. CE
2. FCC
3. UL
PART 3 EXECUTION
3.01 EXAMINATION
A. Inspect products before installation
B. Product shall be free of any cosmetic defects or damage.
3.02 PREPARATION
A. Product shall be mounted on a properly prepared surface adequate for the size and weight of product. The placement of the unit shall allow provision for cable installation and maintenance as indicated on the approved detail drawings and in compliance with the manufacturer’s recommended procedure.
3.03 INSTALLATION
A. Install product as indicated on the approved detail drawings and in accordance with the manufacturer’s recommended procedure.
B. Ensure unit is installed in a well-ventilated, dust-free environment.
C. Unit is designed for indoor use only.
D. Keep all liquids away from the DVR / NVR.
E. Ensure environmental conditions meet factory specifications.
F. Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit.
G. Use the DVR / NVR in conjunction with an UPS if possible.
H. Power down the unit before connecting and disconnecting accessories and peripherals.
I. A manufacturer recommended HDD should be used for this device.
3.04 TESTING
A. Verify that the DVR / NVR is powered in accordance with manufacturer recommendations.
B. Verify that all cables (power and coaxial) are properly and securely connected.
C. Review video on attached monitors and Client Workstations as applicable.
3.05 CLEANING
A. Clean DVR / NVR in accordance with manufacturer recommended procedures.
B. Remove all scraps and debris.
3.06 MAINTENANCE
A. Verify DVR / NVR are correctly connected and all connections are secure.
B. In the event of improper video signal at head-end equipment location, repeat Testing procedure above.
END OF SECTION
Aventura Technologies, Inc. / DIGITAL VIDEO RECORDERS AND ANALOG RECORDING DEVICESDHN-16H / 28 23 19-3