Petra Sliding System:
Description:
Petra Aluminum windows offer every market the correct combination of tried and tested system technology. Whether it is for single or double glazing, this PETRA system from Petra Aluminum Co. is fully compatible with the international market requirements with narrow face widths, minimal basic depths and efficient fabrication and assembly properties. Despite narrow face widths and a small basic depth of 100 mm. Petra Sliding system is the best economical solution for sliding system where no thermal insulation is required.
Product Benefits:
- Easy operation with optional lockable one-hand handles and variety of other handles.
- High performance and low maintenance system with made Teflon covered rollers run on bearings for smooth quiet operation.
- All sliding constructions are impressively smooth and easy to handle. This makes them ideal for universal use in the residential and commercial sector.
- Considerable design freedom thanks to perfect system compatibility.
- Smooth operating sliding fly screens.
Technical Information:
System / Material: Aluminum
Energy: Non-insulated
Opening option: Sliding system
Max. Glass thickness (Double Glazed): 18 mm
Max. Glass thickness (Single Glazed): 6 mm
Height: up to 2000 mm
Face width: 60 mm
Basic depth: 100 mm
Maximum vent weight: 90 kg
Opening option: Sliding vent
Surface finishes: Unlimited RALcolors, either by powder coating. And limited colors by anodization.
Ideal for: Window / Door
Specification Text:
Petra, non-insulated aluminum sliding systemwith 100 mm basic frame depth for maximum transparency and light penetration
Design features:
Vent Profiles
The unit can optionally be designed with vent profiles for single and double glazing.
Double Cavity
Double cavity threshold with special drainage system allowing easy water weeping, the profile floor consists of two layers, the bottom one with an inclination to facilitate water drainage.
Glazing:
The system allows for both single and double glazing. Single glazed glass with 6mm thickness or double glazed with a total thickness of 18mm and air cavity of 6mm.
Gasket:
Glass retention is maintaied by EPDM U-shaped rubber gasket, providing air and watertight seal.
Energy: Non-thermal insulation.
Maximum dimensions:
Vent dimensions heightup to max. 2000 mm
Single glazed glass with 6mm thickness or double glazed with a total thickness of 18mm and air cavity of 6mm is obtained.
Aluminum Thicnkess of 1.5 mm
Weather Seals and Air Penetration:
Double weather strips with Nylon all around the vents, re-enforcing wather resistant of the profile.
Water Drinage:
Water plug allowing water to be collected and drained out of the exterior, in the addition to the drinage cover cap permitting exterior drinage from the tracks that are formed by the special section design within the sliding outer frame.