2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

2015 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Kara E, Geylan AF, Koç K, Karakuzu Ş, Demir M, AykulH. “Flexural performance of the sandwich structures having aluminum foam core with different thicknesses”,World Academy of Science, Engineering and Technology, International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, International Science Index, 9(5), pp. 742-747, 2015.
Kara E, Karakuzu Ş, Geylan AF, Demir M, Koç K, Aykul H, “An Investigation on the Sandwich Panels with Flexible and Toughened Adhesives under Flexural Loading”, World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, International Science Index, 9(5), pp. 651-658, 2015.
SCI / Kara, E, Kurşun, A, Haboğlu, MR, Enginsoy, HM, Aykul, H. “Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths.” Proc. Inst. of Mech. Eng. Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406214559111
SCI / Crupi V, Kara E, Epasto G, Guglielmino E, Aykul H. "Prediction Model for the İmpact Response of Glass Fibre Reinforced Aluminum Foam Sandwiches", İnternational Journal of İmpact Engineering, v.77, pp.97-107, 2015.
SCI / Yataganbaba, A., Kılıcarslan, A., Kurtbas, I. "Irreversibility Analysis of a Two Evaporator Vapor Compression Refrigeration System" International Journal of Exergy, (Accepted/In Press), 2015.
SCI / Yataganbaba, A., Kurtbas, İ., "Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams" Experimental Heat Transfer, (Accepted/In Press), 2015.
Erdin, M. E., Atmaca, A., "Implementation of an Overall Design of a Flexible Manufacturing System", Procedia Technology, v. 19, pp. 185-192, 2015.
SCI / Tuzun, F., N., Tunalıoglu, M., S., 'The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives', Composite Structures, v. 121, p.p. 296, 303, 2015.
SCI / Caliskan S., N. Khalaji, S. Baskaya, I. Kotcioglu, Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by Taguchi method. Heat Transfer Engineering, Volume 37, issue 15, 2015.
Meran A, Baykasoglu C, Mugan A, Toprak T 2015 Development of crash energy management design for a railway passenger car, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit doi: 10.1177/0954409714533321
SCI / Baykasoglu C and Cetin Tunay M. 2015 Energy absorption of circular aluminum tubes with functionally graded thickness under axial impact loading, International Journal of Crashworthiness. 20(1), 95-106
SCI / Ozturk Z, Baykasoglu C, Celebi AT, Kirca M, Mugan A, To AC, 2015 Hydrogen Storage in Heat Welded Random CNT Network Structures, International Journal of Hydrogen Energy, 40, 403-411
SCI / Arat S., Baykasoglu C., Bilhan H., Kutay O., Mugan A. 2015 The Effect of the attachment types and implant number supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis, Journal of Biomechanics, 48(1), 130-137

2014 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Kursun A, Kara E., Uygun R., Aykul H.“Compressive Behaviour of Glass Fiber Reinforced Aluminium Foam”,The Online Journal of Science and Technology, v. 4 (1), 21-26, 2014.
Haboğlu, M. ; Kurşun, A. ; Aksoy, Ş. ; Aykul, H. ; Bektaş, N. 'Thermal Elastic Stress Analysis of Steel Fiber Reinforced Aluminum Composites', World Academy of Science, Engineering and Technology, International Science Index 86, International Journal of Mechanical, Industrial Science and Engineering, 8(2), 23 - 27. 2014.
Kurşun, A. ; Çetin, M. ; Çetin, E. ; Aykul, H. 'Elastic Stress Analysis of Composite Cantilever Beam Loaded Uniformly', World Academy of Science, Engineering and Technology, International Science Index 86, International Journal of Mechanical, Industrial Science and Engineering, 8(2), 38 - 40, 2014.
Tamdemir S.,Kılıcarslan A "Thermodynamic Analysis of A Heat Pump for Different Refrigerants", Hittite Journal of Science and Engineering, 1(1), pp. 27-36 (2014)
SCI / Kiliçarslan A., Qatu M. S.,Performance investigation of an eight cylinder gasoline engine ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014; Montreal; Canada; 14 November 2014 through 20 November 2014;
Kurtbas İ., Yatağanbaba, A. and Sener, M.," Effect of the Mini Perforated Resistance on Heat Transfer and Pressure Loss" Journal of Environmental Science, International Scientific Journal, ISBN-10: 1499721986, ISBN-13: 978-1499721980, 2014, pp. 126-130.
SCI / Kurtbas İ.,Gülçimen F., Kılıçarslan A., Kaya M., “Effect of swirl generator inserted into a tube on exergy transfer: decaying flow”, Experimental Heat Transfer, pp. 472-487 (2014).
Kurtbas İ., Yatağanbaba, A. and Sener, M.," Effect of the Mini Perforated Resistance on Heat Transfer and Pressure Loss" Journal of Environmental Science, International Scientific Journal, ISBN-10: 1499721986, ISBN-13: 978-1499721980, 2014, pp. 126-130.
Yatağanbaba, A.,Kurtbaş, İ.," Determination of Optimum Parameters for Walls with Phase Change Materials" Journal of Environmental Science, International Scientific Journal, ISBN-10: 1499721986, ISBN-13: 978-1499721980, 2014, pp. 104-110.
SCI / Özdin, K.,Büyük, E.,Abdalov, F,Bayram, H., Çini, A., Investigation of spring-back and spring-go of AISI 400 S sheet metal in "V" bending dies depending on bending angle and punch radius, Applied Mechanics and Materials, Volume 532, 2014, Pages 549-553, DOI: 10.4028/
SCI / Ozdin K.,Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite Experimental Techniques Volume 38, Issue 6, 1 November 2014, Pages 16-20
SCI / Köstekci, F. (2014). "Effects of Flexural Stiffness, Axial Velocity and Internal Support Locations on Translating Beam’s Natural Frequencies." Applied Mechanics and Materials 532: 316-319.
SCI / Tunalioglu, M., S., Tuc, B., 'Theoretical and experimental investigation of wear in internal gears', Wear, Vol. 309(1-2), p.p:208-215, 2014.
SCI / Heat transfer characteristics of longitudinal perforated and unperforated ribs under impingement jets , Volume 8B, 2014
SCI / Çalışkan S.,Başkaya Ş., Çalışır T. "Experimental and numerical investigation of geometry effects on multiple impinging air jets", International Journal of Heat and Mass Transfer, Vol. 75, pp. 685-703, 2014.
SCI / Çalışkan S" Experimental investigation of heat transfer in a channel with new winglet-type vortex generators", International Journal of Heat and Mass Transfer, Vol. 78, pp. 604-614, 2014.
SCI / Celebi A T, Kirca M, Baykasoglu C, Mugan A and To A. C. 2014 Tensile behavior of heat welded CNT network structures, Computational Material Science, 88,14-21
Kara E.,Kurşun A., Haboğlu MR., HM Enginsoy, H Aykul (2014) "Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths", Part C: Journal of MechanicalEngineering Science, DOİ :10.1177/0954406214559111
Aksoy, Ş. ; Kurşun, A. ; Çetin, E. ; Haboğlu, M. (2014), 'Stress Analysis of Laminated Cylinders Subject to the Thermomechanical Loads', World Academy of Science, Engineering and Technology, International Science Index 86, International Journal of Mechanical, Industrial Science and Engineering, 8(2), 5 - 10.
Çetin, E. ; Kurşun, A. ; Aksoy, Ş. ; Çetin, M. (2014), 'Elastic Stress Analysis of Annular Bi-Material Discs with Variable Thickness under Mechanical and Thermomechanical Loads', World Academy of Science, Engineering and Technology, International Science Index 86, International Journal of Mechanical, Industrial Science and Engineering, 8(2), 49 - 53.
Kurşun, A. ; Kara, E. ; Çetin, E. ; Aksoy, Ş. ; Kesimli, A. (2014), 'Mechanical and Thermal Stresses in Functionally Graded Cylinders', World Academy of Science, Engineering and Technology, International Science Index 86, International Journal of Mechanical, Industrial Science and Engineering, 8(2), 64 - 69.
SCI / Bakal A.,Aydın F., Mahmut D. Mat, Beycan Ibrahimoğlu and İbrahim Pamuk. A novel two-part interconnector for solid oxide fuel cells. International Journal of Energy Research. Nov2014, Vol. 38 Issue 14, p1835-1842.

2013 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

SCI / Ertürk E.,Dalkız M., Özyılmaz E, Akbaş HZ, Çetinkara A., Aykul H. “The evaluation of the effects of surface treatments on different dental ceramic structures”. Materials and Technology, v.47, n.5, 653-660,2013
Atmaca A., Türkbas O.S., Erdin M.E., Aykul H. "Elasto-Plastic Stress Analysis of Steel Fibre Reinforced Aluminum Metal Matrix Composite Plates", Journal of Manufacturing and İndustrial Engineering, v12, n.1-2, 12-16, 2013.
SCI / Gemalmayan, N., Tunalıoğlu M., Ş., "Saturation Operation on the Direct Current Motor That is Used for Manipulator", Gazi University Journal of Science, 26(3):459-465 (2013).
SCI / S. Çalışkan "Flow and heat transfer characteristics of transverse perforated ribs under impingement jets", International Journal of Heat and Mass Transfer, Vol. 66, pp. 244-260, 2013.
SCI / Baykasoglu C, Kirca M and Mugan A 2013 Nonlinear failure analysis of carbon nanotubes by using molecular-mechanic based models, Composite Part B: Engineering,50, 150-157
SCI / Arat S., Bilhan H., Bozdag E., Sunbuloglu E., Baykasoglu C., Kutay O., 2013 The Influence of the Attachment Type and Implant Number Supporting Mandibular Overdentures on Stress Distribution: An in vitro Study - Part I, Implant Denstry, 22, 39-48.
SCI / Baykasoğlu, C.,Muğan, A., Sünbüloğlu, E., Bozdağ, E., Aruk, F., Toprak, T., 2013 Rollover crashworthiness analyses of a railroad passenger car, International Journal of Crashworthiness,18-1,492-501
SCI / Kurşun, A., Topçu, M., (2013), Thermal stress analysis of functionally graded disc with variable thickness due to linearly increasing temperature load, The Arabian Journal for Science and Engineering, DOI:10.1007/s13369-013-0626-x.
SCI / Kurşun, A., Şenel, M., (2013), Investigation of the effect of low-velocity ımpact on composite plates with preloading, Experimental Techniques, 35 /2/1-8.
SCI / Bakal A, Kaya M and Mahmut D. Mat, Numerical Investigation of Amounts of Heat, Power and Temperature Distribution in IT-SOFC, ECS Trans. 2013 58(3): 115-129; doi:10.1149/05803.0115ecst

2012 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Dalkız M., Arslan D.,Tuncdemir A.R. Bilgin M.S.,.Aykul H., Effect of different palatal vault shapes onthe dimensional stability of glass fiberreinforcedheat-polymerized acrylic resindenture base material, European Journal of Dentistry, v.6, 70-78, 2012.
SCI / Kılıçarslan A., “Irreversibility analysis of a compression refrigeration cycle using natural refrigerants for a sustainable future”, International Journal of Exergy, 101(2), pp. 155-170 (2012).
SCI / . B. S. Ünlü, A. M. Pınar, K. Özdin, "Tribological properties of Sn-Pb based SnPbAlZn journal bearings", Materials Testing (ISI) , 713-717 pp., 2012
SCI / Çalışkan S.,Başkaya Ş. "Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs", International Journal of Heat and Mass Transfer, Vol. 55, pp. 6260-6277, 2012.
SCI / Çalışkan S.,Başkaya Ş."Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs", International Journal of Thermal Sciences , Vol. 59, pp. 234- 246, 2012.
SCI / Baykasoglu C and Mugan A 2012 Nonlinear fracture analysis of single-layer graphene sheets, Engineering Fracture Mechanics, 96, 241-250
SCI / Baykasoglu C and Mugan A 2012 Coupled molecular/continuum mechanical modeling of graphene sheets, Physica E: Low-dimensional Systems and Nanostructures, 45, 151-161.
SCI / .Baykasoglu, C., Sünbüloglu, E., Bozdag, E., Aruk, F., Toprak, T., Mugan, A., 2012 Crash and structural analyses of an aluminum railroad passenger car, International Journal of Crashworthiness, 17-5, 519-528.
SCI / Baykasoglu C and Mugan A 2012 Dynamic analysis of single-layer graphene sheets Computational Material Science, 55, 228-236.

2011 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Dalkız M.,,Arslan D. Tuncdemir A.R. Aykul H. Effect of different palatal vault shapes onthe dimensional stability of glass fiberreinforcedheat-polymerized acrylic resindenture base material, European Journal of Dentistry, v.6, 70-78, 2012.
SCI / Kılıçarslan A.,Kurtbaş İ, “Comparison of superheating effect of water as a refrigerant with the other refrigerants”, Journal of Thermal Science and Technology, 31(2), pp. 33-40 (2011).
SCI / Çalışkan S.,Altunok T., Başkaya Ş., Güngüneş H.M "Hava Perdeli Bir Ticari Soğutma Kabininin Sayısal Analizi", Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Vol. 26(2), pp. 415-425, 2011.
SCI / Kotcioğlu İ., Çalışkan S, Başkaya Ş"Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin–fin arrays", Heat and Mass Transfer, Vol. 47, pp. 1133-1142, 2011.
SCI / Kotcioğlu İ, Cansız A.,Çalışkan S, Başkaya Ş"Transient Turbulent Flow and Heat Transfer Phenomena in Plate-Fin Type Cross-Flow Heat Exchanger", Heat Transfer Engineering, Vol. 32(1), pp. 20-32, 2011.
SCI / Baykasoğlu, C., Sünbüloğlu, E., Bozdağ, E., Aruk, F., Toprak, T., Muğan, A., 2011 Railroad passenger car collision analysis and modifications for improved crashworthiness, International Journal of Crashworthiness, 16-3, 319-329.
SCI / Kurşun, A., Topçu, M., Tetik, T., (2011), Stress analysis of functionally graded disc under thermal and mechanical loads, Procedia Engineering, 10/ 2949–2954.

2010 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

SCI / Aykul. H., Kaya. S. “An Elastic-Plastic and Residual Stress Analysis Steel Reinforced Thermoplastic Composite Cantilever Beam”, Materials and Design, v.31 n.7, 3474-3481, 2010.
SCI / Kılıcarslan A.,Hosoz M, “Energy and irreversibility analysis of a cascade refrigeration system for various refrigerant couples”, Energy Conversion and Management, 51, 2947-2954 (2010).
SCI / Kurtbaş İ.,Çelik N., Dinçer İ, Exergy transfer in a porous rectangular channel, energy, 35, (1), 451-460
SCI / Çelik H, N.,Kurtbaş İ., Yildiz, S. Exergy analysis of coil-spring turbulators inserted in the horizontal concentric tubes Journal of Heat Transfer Volume 132, Issue 10, 2010, Page 101802
SCI / Kotcioğlu I, Çalışkan S, Cansız A, Başkaya Ş. "Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator", Energy , Vol. 35, pp. 3686-3695, 2010.