DCS2 Series

Excavator weight class 5 – 9 t

Type / Content – SAE (l) / Weight (kg) / Cutting width E (mm) / Number of teeth
DCS2-270 / 90 / 250 / 270 / 3
DCS2-300 / 100 / 255 / 300 / 3
DCS2-400 / 135 / 270 / 400 / 3
DCS2-500 / 170 / 285 / 500 / 5
DCS2-600 / 205 / 300 / 600 / 5
Technical data
Excavator weight class / t / 5 - 9
Load-bearing capacity max. / t / Grab: 2 / rotating motor: 2,5
Bulk weight to / t/m3 / 2
Operating pressure max. / bar / 300 (grab and rotation function)
Closing force max. / kN / 27
Connections / Rotation: M18 x 1.5 / Grabbing: M18 x 1.5
Displacement volume max. / Rotation: 20 / Grabbing: 53

Application: Mobile and chain dredgers, truck loading cranes

Versatile deep grabs for typical hydraulic excavator operation, e.g.: Excavation and dredging of natural soils, extracting ditches and cable shafts, loading earth, gravel and sand.

Design features / Available accessories and equipment
Claws with support can be replaced by 3-point insertion system within the entire series
Compact rotating motor with infinite hydraulic rotation
Side and ground cutting made from high-strength
fine-grain steel (450 HB)
Mechanical opening and closing limit stops
Forged 2-hole screw teeth
Hose protection clamp for hydraulic connections
on rotating motor / Rotating motor with integrated pressure limitation for grab function
Hose kit and suspension for all known excavator brands
Suspension for grab swing brake
Load hooks, sleeve insertion teeth
Special claws according to customer requirements
Further special equipment on request
Piston rod protection

HGT Hydraulikgreifer-Technologie GmbH • Handorfer Weg 19 • D-31241 Ilsede • Tel. +49 (0) 51 72.4 10 09-0 • Fax +49 (0) 51 72.4 10 09-120