/ Government College of Engineering, Nagpur
Sector 27, Mihan Rehabilitation Colony, New Khapri, Nagpur, Maharashtra 441108
(07103) 202012 e-mail–
web:

No.GCOEN/QUOT/ EE-10 /2016-17/779

Date: 23.12.2016

To,

All the Qualified Suppliers

Subject: - Quotations for supply of ElectricalLab Equipments

Sir,

Quotations are invited for the supply of ElectricalLab Equipmentsas per the sheet in the list attached herewith, subject to the following conditions-

  1. Quotation should be typed with rates in figure and words. Quotation should be submitted in the sealed envelope duly sealedso as to reach this office latest by dated 10.01.2017up to 5.00pm. Quotation will be opened on 11.01.2017at 3.00pm
  2. The quotation should be submitted in the sealed envelope. At the top of the envelop Following details should be mentioned
  3. Quotation for supply of …………………………………………..
  4. Quotation References No. ………………………………………..
  5. Last date of Submission …………………………………………
  6. Supply will have to be completed within 15 days from the date of issue of supply order. If this period is not acceptable for any or all items, the delivery period should be clearly stated in quotations which may not necessarily be acceptable.
  7. Supply will have to be made at the premises of Government College of Engineering, Nagpur.
  8. Rates quoted should be inclusive of all taxes, freight, carting charges, insurance, packing and forwarding charges or any other surcharges. If VAT or any other ischarged extra,it should be clearly mentioned. Otherwise it will be presumed that rates quoted, include all Taxes/Charges.
  9. Items quoted should be of the best quality and should indicate specifically the make, name and country of manufacturer and should be in conformity with our specifications. The quotations should be submitted along with “No Deviation Certificate” attaching catalogues, leaflets etc. Items quoted should have warranty of minimum two years.
  10. Quotations and offer of supply should remain open for acceptance with a validity ofsix months from date of opening of the quotations.
  11. The entire responsibility of the safety of goods in transit and up to the place of delivery will be that of supplier.
  12. Payment will be subjected to delivery of supplied items in good condition, testing, installation training etc. as per requirement and approval of the undersigned. The deductions if any, will be applicablein respect of short supply, damages penalty etc. as per norms.
  13. Bills must be submitted to the undersigned in triplicate within a week from supply of goods.
  14. The Payment will be made by DD/Cheque/NEFT/RTGS to the supplier.
  15. The undersigned reserves the right of withholding full or part payment for the supply not made according to the conditions and specifications of the materials. (Supplier will have to take back rejected material equipmentin part or full from the premises of institutions at the cost of supplier.
  16. The undersigned shall not incur any liability to pay interest for delay in payment of bills for any reasons what so ever.
  17. Representative/supplier may attend the office(if desired so) at the time of opening of quotations at your cost.
  18. The required quantity may vary.

-Sd-

Principal,

Govt. College of Engineering

Nagpur

Quotation Sheet (to be enclosed and duly signed with covering letter by the supplier)

Sr. No. / Name Of the Equipment / Detailed Specifications / Required Total Quantity / Per Unit Rate to be quoted in Indian Rupees (in words & figures)
1
2
3
.
.
.
.
.
.

Name and Signature of the Supplier/ Representative

List of Items Required

Ref: GCOEN/QUOT/ EE-10/2016-17/779
Sr. No / Name of the Equipment / Detailed Specifications / Required Total Quantity
1 / Single Phase Transformer Trainer / To perform the experiments-
1. Study of Polarity, Turns ratio, Transformation, ratio
2. Study of Iron loss, Copper loss etc.
3. Open Circuit / Short Circuit Test in a Single Phase Transformer
Setup should Include:-
1. Experiment panel that contains :-
a.Transformer inside the panel
b.Auto Transformer
c. Wattmeter - 2Nos.
a. Voltmeter (MI) : 0-300 V (2 Nos.)
b. Ammeter (MI) : 0-5A (2 Nos.) / 1
c. Ammeter (MI) : 0-100 mA
d. Wattmeter : 0-100 W
e. Wattmeter : 0- 500 W
4. Transformer Specifications-Mains Supply : 230 V ±10 %, 50 Hz
Transformer Rating : 1 KVA
Primary Voltage : 0 - 125 V, 0 - 125 V
Secondary Voltage : 0 - 125 V, 0 - 125 V
2 / Three Phase Induction Motor Trainer / To perform the experiments-
1. Study of running and reversing
2. Study of No Load and Block Rotor
3. Measurement of Slip
4. Study of Speed-Torque characteristics
Setup should Include-
1. Squirrel Cage Motor-1HP, 1440 RPM (No Load) / 1
2. Experiment panel that contains :-
a. Wattmeter - 2Nos. (0-1000 W)
b. Voltmeter - 1 No. (0-500V)
c. Ammeter - 1No. (0- 5Amp)
d. 3 Phase, 10 Amp MCB
e. Digital Tachometer
3. Connecting patch cords
4. Product Tutorial
3 / Single Phase Induction Motor Trainer / To perform the experiments-
1. Study of Single Phase Induction Motor
2. Running and Reversing of Induction Motor.
3. No Load test in a Induction Motor.
4. Blocked Rotor test in a Induction Motor.
5. Load test of a Single Phase Induction Motor.
Setup should Include-
1. 1 Phase Capacitor Start Induction Motor of rating-1 HP, 8A / 1
2. Experiment panel that contains-
a. Wattmeter - 1Nos.(0-500W)
b. Voltmeter - 1 No. (0-300V)
c. Ammeter - 1No. (0-5A)
d. 10A MCB
e. Digital Tachometer
3. Connecting patch cords
Mains Supply : 230 V AC ±10%, 50Hz
Panel Dimensions- As per Requirement
4 / Experimental Set up to perform Brake test on D.C. Shunt motorwith control panel / Setup should Include-
1. D.C Shunt Motor 3 HP, 230V, 1500 rpm with Mechanical
Loading arrangement.
2. DC Voltmeter (0-150-300V)
3. DC Ammeter (0-5-10A)
4. Rheostat 300Ω/1.4 A / 1
5. Control Panel having machine terminal board for above motor. The complete set should consist of-
a. AC/DC supply provision
b. 3 Point Starter
c. BTI 15 terminal
d. fabricated m/s panel from 16/18 CRCA sheet, with powder
coating & Front mimic diagram
5 / Experimental Set up to perform No Load & Block Rotor test on 3 Phase Induction Motor / Setup should include-
1. Three phase Induction Motor 3 HP, 415V, 1440 RPM with Mechanical loading arrangement
2. AC Voltmeter (0-150-300V)
3. AC Ammeter (0-5-10A)
4. Wattmeter (5/10A, 0-150-300-600V ) / 1
5. 3-Phase Variac (10A, 440/0-470V)
6. Digital Tachometer
7. Control Panel having machine terminal board for above motor. The complete set should consist of-
a. AC/DC supply provision
b. DOL Starter
c. BTI 15 terminal
d. fabricated m/s panel from 16/18 CRCA sheet, with powder
coating & Front mimic diagram
6 / Experimental Setup for Speed-torque characteristics of 3-phase slip-ring induction motor / Setup should include-
1. 3-Phase slip-ring Induction Motor 3HP, 1440 RPM, 415V, with brake & pulley arrangement
2. AC Ammeter (0-10-20A)
3. AC Voltmeter (0-150-300V )
4. Wattmeter (10/20A,0-150-300-600V) / 1
5. 3 Phase Variac (10A, 440/0-470V)
6. Digital Tachometer
7. Rotor Resistance Starter
8. Control Panel having machine terminal board for above motor. The complete set should consist of-
a. AC/DC supply provision
b. BTI 15 terminal
c. fabricated m/s panel from 16/18 CRCA sheet, with powder
coating & Front mimic diagram
7 / Experimental Setup for Load test on 3-phase Induction Motor trainer / Setup should include-
1. 3 HP, 415V, 1440 RPM Three phase Induction Motor with Mechanical Loading arrangement
2. AC Ammeter (0-5-10A)
3. AC Voltmeter (0-150-300V )
4. Wattmeter (5/10A, 0-150-300-600V )
5. 3 Phase Variac (10A, 440/0-470V)
6. Digital Tachometer
7. Control Panel having machine terminal board for above motor. The complete set should consist of- / 1
a. AC/DC supply provision
b. DOL Starter
c. BTI 15 terminal
d. fabricated m/s panel from 16/18 CRCA sheet, with powder
coating & Front mimic diagram