The Potato Bazooka!

NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
The Potato Bazooka!
From the people who brought you the tennis ball cannon, and the potato gun, comes the newest device for home safety and recreation!
Well it seems to have spread across the country :-) I was talking to my dad in N.C. who said that all of the kids over 30 were playing with potato bazookas :-) And that it was developed in CA. and introduced to the East Coast. Now Rush Limbaugh ?sp. has talked about it! Well, I built one from verbal instructions and it works! It has a few bugs to be worked out, but all in all, it's very impressive. I thought I would post an acsii drawing of it to the net ;-)
____ <---- sharpen this end to<br> | | cut the potato plug<br> | |<br> | |<br> ~~~~~~ <---- 2" diameter ABS <br> |~~~~| plastic pipe 36" long<br> | |<br> | |<br> |____|<br> [____]<br> /______\ <--- 4" to 2" reducer<br> [______]<br> | |<br> | |<br> | |<br> | @|@ <--- gas grill ignitor<br> | |<br> | | <--- 4" diameter ABS tube<br> |______| 12" long<br> [______]<br> [////////] <---- screw thread fitting<br>
[////////]<br> [____] <--- screw cap
Assemble all the parts (except the screw cap) and glue them together using ABS glue. Fit the gas grill ignitor through the middle of the 12" section of tube. So far, what I have seen that works is to load a potato plug, spray a couple shots of Aquanet Hairspray into the other end, screw on the cap, and using a 30" plunger - push the potato plug down the 36" tube. Aim (never aim this at a person or animal!!) and fire! It will launch a potato plug about 1200'!!!
I will not assume any responsibility for your ability to build this correctly, choice of fuel, ammo, or choice of target. You are responsible for your actions. Be careful and have fun. /
/
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.

totse.com certificate signatures