User Manual
Dear Customer,
Thank you for purchasing. Kindly read this user manual carefully to learn about key functional characteristics and operational methods of this mobile phone.
Safety and Precautions:
To use your phone safely and effectively, please read the following information before use:
Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives.
To ensure safety, please use earphone during driving; Otherwise, unless emergency, make a call after parking your car by the roadside. DO NOT use the phone during driving at high speed.
Do not use your cell phone while in a plane. Please check whether Flight mode is set or not before boarding.
Do not use your cell phone in a hospital to avoid interference with the normal operation of medical equipment which may result in a medical accident. If the cell phone is used near a pacemaker, audiphones and some medical electronic equipment, you should pay special attention that the cell phone may interfere with these devices.
Auxiliaries and accessories not provided by us are excluded from the guarantee.
Do not dismantle your cell phone by yourself. In case of a failure, please contact the service station specified by us. Only qualified person may install or repair this product.
The phone should be charged in the environment which is well-ventilated, and should be kept away from inflammable substances and explosives. To avoid demagnetization, please keep your phone away from magnetic substances, such as magnetic disk, credit card, etc.
Please be sure the phone isn't exposed to any liquid. In Case this situation occurs, please remove the battery and contact the service station specified by us.
Please use your phone in the environment which is neither too hot nor too cold, do not expose your phone in strong sunlight and in high-humidity environment.
All wireless devices may be susceptible to interference, which could affect performance.
Your cell phone has photo and record functions, please use these functions following the related laws and regulations. You may violate the laws and regulations if you take photos and record without authorization.
· Do not dispose the worn battery as common domestic rubbish. Please dispose the worn battery according to the specified instructions where the disposal of a worn battery is clearly specified.
Note: The Company will not undertake any responsibility for any consequences caused by failure to observe the above mentioned suggestions or improper applications.
If any content described in this manual goes against that of your cell phone, it is subject to the real cell phone.
H3 operates a policy of continuous development. H3 reserves the right to make changes and improvements to any of the products described in this document without prior notice.
The availability of particular products may vary by region. Please check with the H3 dealer nearest to you.
Cell Phone Outline:
IT IS AN EXAMPLE PLEASE GIVES OUTLINE FOR H3 PHONE.
Contents
Messages…………………………………………………………….2
Phonebook …………………………………………………………..5
Call center………………………………………………………….7
Settings………………………………………………………………9
Y Zone……………………………………………………………….14
Multimedia…………………………………………………………..15
Profiles……………………………………………………………..17
File manager ………………………………………………………..19
Organizer……………………………………………………………20
Audio player …………………………………………………………22
Services ……………………………………………………………...23
Video player …………………………………………………………24
Messages:
The Messaging function is a network service. Sending and receiving Text can only be used if the service is proposed by your network operator.
You can send ordinary Text messages; enhanced Text messages (Text messages containing pictures, ring tones and animation as attachments, EMS for short). The SMS is sent to the Text messages center in the network firstly, and then to the target user. If the receiver’s mobile is power off or cannot receive messages, the network will store the message temporarily and the store duration is determined by the user configuration and the service provider.
The message will be directly stored in the SIM card if the capacity is not full. A blinking icon at the head row of the main screen will be displayed if the capacity is full.
Messages unread
If the Text message has been sent to the receiver, a beep will sound. (If the tone for Text messages and message report are activated).
[Write message]
u Send: Enter the appropriate number of the recipient or from the phonebook add.
u Insert template: to the content of the message currently being edited into the common language.
u Add contact info: Insert the contact person.
u Add phiz: emotions into the meaning of the representative.
u Save： Save the message to drafts.
u Schedule SMS: Set the time to send the SMS.
[Inbox]：
u Reply: Reply through SMS to receive message.
u Delete: Delete short message.
u Operate: Choose to copy/move record to SIM/phone
u Call: choose a voice call or a call to the sender IP calls
u Lock: lock cannot be deleted.
u Mark: single marker or markers in whole or in text messages stored in SIM1/SIM2, mark or unmark after delete records.
u Sort: In accordance with time / contact / theme / message type sort
u Delete repeated number: choose to delete the same number of records.
u Add to blacklist: Add the record to blacklist
[Outbox]: Store all SMS failed to be sent.
[Drafts]：Save edited SMS haven’t sent.
[Sent box]: Store all the SMS successfully sent out. If you want the sent messages be saved automatically
[Schedule SMS]: SMS can be sent through schedule set time.
[Blacklist]: The list of blacklist number.
Phonebook:
You have 2 phonebooks in this mobile phone: SIM card and the mobile. The mobile can store 300 phone numbers and the SIM card’s capacity depends on its type.
In standby mode, enter a number, press the call key pieces to make a call, press the OK key to save
◆ If ‘To SIM 1/2’ is selected, users can edit name and number.
◆ If ‘To phone’ is selected, the user can edit the name, mobile number, home number, e-mail address, image, ringtone, caller groups
Into the phone book list, the list on the left displays a small icon indicates that the record exists SIM card or mobile phone, the right is the record of the name and number information.
Standby mode, press the right soft key to enter into the address book or from the menu into the address book, do the following:
[New]: Selection into the select group interface: into the phone or SIM card.
[Search]: Enter the contact name and press the Enter key to find.
[SMS]: Choose to write messages into the appropriate function interface.
[Call]: Choose to allocate or direct IP dialing.
[Send vCard]: Choose to send vCard by SMS/Bluetooth.
[Delete]: Choose to delete the selected contact record.
[Mark]: mark-all or the currently selected record.
[Copy]: Select Copy to SIM, or cell phone or storage card.
[Copy all]: Select to copy all to T-card or phone
[Others]
[Speed dial settings]: start and set the speed dial
[Caller ID]: Query and edit the phone numbers
[Memory status]: Query the current SIM card and mobile phone storage capacity.
[Single line display]: Ring Contact records show single or double lines.
Call center:
You can view your recent call situation.
[All calls]: Enter the main menu, and then select [Call logs] to enter the call list.
[Dialed calls]：Display recent calls dialed.
[Received calls]: Display recent calls received.
[Missed calls]: Display recent calls unpicked up.
[Rejected calls]: Display recent calls rejected.
[Call timers] Select the desired SIM Card, and then you can view all relevant information about the SIM Card.
Call cost (need the network support)
v Total cost: Record total call charges for SIM1 and SIM2.
v Max cost: You can set the desired upper limit for call costs.
v Price per unit: Record the cost rate for SIM1 and SIM2.
v Reset cost: Reset the total call charges as zero.
Settings
【Call settings】
[Dual-SIM]
[Standby mode]: You can select the standby mode for SIM card, either to have one SIM card standby, or to have both SIM cards standby simultaneously.
[Reply by original SIM]: Reply the call/SMS/MMS by original SIM
[Set SIM name] You can name the Card as you want.
[Network selection]
Auto select: The phone can automatically search and register available networks.
Manual select: Enable this function, the phone will search for the network, and list all searched networks, then you need to choose the one needed to register.
[Call divert]: Based the set diverting conditions, incoming calls will be forwarded into voice mail or other numbers.
[Call barred] This function helps you to restrict the incoming and outgoing calls.
[Call waiting]
v Activated: If you set the function on, the network will alert you that there is an incoming call. You can keep current call and answer another one.
v Off: Cancel call waiting function, then the new incoming calls won’t be answered while you’re on the phone already.
v Query status: Select it to view current status of this function.
[Hide ID](Need network support)
v Hide ID: While calling, the recipient won’t see your phone number.
v Display own ID: While calling, your phone number will be visible for the recipient.
v Display ID by network: While calling, whether your phone number will be visible or not for the receiver depends on the network presetting.
[Select line] You can choose Line 1 or Line 2 as you need.
v [Fight mode] Activate flight mode, and then all network service won’t be available.
Others:
50 secs warning
If you activate the function, an elapsed time reminder will be heard at the 50th second of every minute during your call, so that you may end the call timely to save the phone fare.
Vibration when connected
The phone will vibrate to prompt you when the recipient answers your phone.
Answer/Reject mode
Reply SMS after reject: You can select whether to reply an SMS after rejecting a call.
Auto redial
If you set this function on, the phone will redial the number after an unsuccessful call,
[Phone settings]
[Time and date]
u Set time: set the phone to display the time
u Set date: set the phone to display the date
u Time format: Set the display time format
u Date display type:Set the date display format
u Auto update time: The function of auto updates time.
u Manual update time: Choose to manual update time
Select language
You can select the language you want.
Shortcut settings
While the Home Screen is smart style, you can change the shortcuts on Home Screen via this.
While the Home Screen is standard style, you can change the responsible shortcuts for 【Navigation Key】under standby mode.
Auto power on/off
You can set the phone to switch on/off at a scheduled time.
Power management
Display the battery capacity.
Restore factory settings
Reset all parameter values into default status. Please enter the privacy preserving password (Initial password is 1234) to resume factory setting.
Display settings
Wallpaper settings
Select the default or other pictures as the wallpaper of the phone.
Idle screen style
”Standard style” and “Smart style” are available.
Contrast
Press 【Left /Right Key】to adjust the contrast.
Backlight
Select the desired backlight time.
Keypad backlight time
Select the desired keypad light time.
Animation effect
Power on display: You can select the preset animation or others as the Power on animation for your phone.
Power off display: You can select the preset animation or others as the Power off animation for your phone.
.
[Security settings]
[PIN 1] Select open or modify the phone's PIN code
[PIN 2] PIN2 choose to modify the phone code
[Privacy] set access to enter the password to view functionality.(Including: call log / messages / camera / address book / document management / e-book / calendar schedule / U disk)
[Auto keypad lock] After activating this function, the phone will be locked automatically if the time you set is arrived, so as to avoid error operations.
[Lock screen by end-key] Once activated this function, when the backlight is on, press【End Key】to turn off the backlight and auto lock the keypad.
[Power-on password] Set the need to enter a password to open the boot function of the normal boot
[Mobile Tracker] to set the security password and open the feature, open the opportunity for the card and then prompts for security password, if the wrong password is entered three times, the phone can receive within 24 hours of alarm information.
[Connection management]
[Network account]
[New connection] Create a new Internet account
[Add from list] from the system built-in Internet account to add a new account
[Search] from the current logged on to Internet search to the card account information, which added to the list after the selected
[Delete] Delete the account
[Edit] Edit the account
[GPRS settings] Set the GPRS
[Browser settings] Set the browser setting
Application
[Smart Auto Call Record]: Auto record when calling
[Game]: Provide an interesting game.
[Yahoo]: Connect to Yahoo.
[Face book]: Connect to face book.
[MSN]: Connect to MSN.
[Google]: Connect to Google.
[STK]: SIM Application Toolkit. It can provide you with flexible information functions, such as stock information, traffic information, and weather and so on. STK functionality provided by the network operator decision. The business needs the support of SIM cards and network
Multimedia
【Camera】The phone supports photo, so you can capture your favorite scenes anywhere. Photos will be saved in the phone .Photos comes as JPG format, and you can transfer photographs to a computer via USB connection to view, can also be set Image for the standby
Note：This function can work without driver under Windows XP by directly connecting your mobile to the computer
Capture: press OK key to catch the picture
Press the left key into the “option” function
[Gallery]: View saved photo
[Settings] Set camera parameters
[Storage]: Choose a photo is stored
【Video recorder】Use the function of video recorder
【Image browser】
[Change folder] Select a stored phone image folder storage space, this view picture