DATA SUBMISSION FORM FOR CCAMS /
Addressees:EUROCONTROL - NM
to:NM/AD_Team

CCAMS DATA SHEET / Date of submission:
Country / ANSP:
CCAMS National Coordinator: / Copy to National ENV Coordinator:
NAME: / Name:
Phone: / Phone:
e-mail: / e-mail:
STATIC DATA
Date of implementation:
Area of Responsibility : full ATC Unit Airspace ( please check the listing below provided by CFMU , and correct/add/delete where necessary)
Description:Area of Interest:
Latitude / Longitude / Latitude / Longitude / Latitude / Longitude
DYNAMIC DATA
Implementation Date:
ADRESSING (Please indicate if different then IFPS addressing)
Unit ID + Type / AFTN Address / To Unit
(flights affected) / Address

1

Amendment date: 21 Mar 2016 / EDITION 12.0
DATA SUBMISSION FORM FOR CCAMS /
Addressees:EUROCONTROL - NM
to:NM/AD_Team

AD PARAMETERS
AD ICAO ID / Minutes
(On Timer)
(default = 20 min) / Departure SSR Code Assignment Mode
(Automatic/Manual)
( default : automatic)
DEP. SSR Code
Assignment Time
ARR. SSR Code
Assignment Time / Not applicable
AD ICAO ID / Minutes
(On Timer)
(default = 20 min) / Departure SSR Code Assignment Mode
(Automatic/Manual)
( default : automatic)
DEP. SSR Code
Assignment Time
ARR. SSR Code
Assignment Time / Not applicable
ENTRY/EXIT PARAMETERS( default: automatic, 30 min)
Area / Adjacent Area / EXIT
Exit SSR Code Release Time
Mode S disabled ( per area) default= yes
Area: / Yes / No
DATA SUBMISSION FORM FOR CCAMS /
Addressees:EUROCONTROL - NM
to:NM/AD_Team

Description

CCAMS Nat. Coordinator:Name of the CCAMS National Coordinator.

Originator:Name of the CFMU ENV Coordinator.

Addressees to:NM/AD Team.

Date of Submission:Self explanatory.

Default values, which will be used if no other info is given.

AD parameters / Automatic / 20 min
Entry / Per COR
Mode S disabled / yes

Part 1: STATIC Data

Implementation date:As it concern static data, it needs to be an AIRAC date.

Area of Responsibility (AoR):Area of Responsibility is covered by the full ATC Unit Airspace.

Area of Interest (AoI):Area of interest is the area in which the ATS Unit concerned has correlated radar data coverage.

Part 2. DYNAMIC data:

Implementation date:Indicate the date as from which the request should be valid in the CFMU System

Addressing:to indicate if different from IFPS addressing

DATA SUBMISSION FORM FOR CCAMS /
Addressees:EUROCONTROL - NM
to:NM/AD_Team

AD parameters:

a)Departure SSR Code.

Indicates whether the SSR Code assignment Mode to flights departing from the specified Aerodrome will be done automatically at a given duration prior to EOBT or whether the code will be assigned only when requested

─on Timer: code is assigned automatically by CCAMS at lead time before departure.

─on Request: code will be assigned when requested.

b)Departure SSR Code.

Time duration in minutes stating the time when the assignment Time automatic assignment of an SSR Code will be done prior to the EOBT of a flight departing from the specified Aerodrome. If more then 30 minutes, please provide justification.

c)Arrival SSR Code Release.

Time duration in minutes stating the time when the time SSR Code of a flight landing at the specified Aerodrome can be released.

Entry/Exit Parameters:

a)Entry SSR code assignment Mode.

Indicates whether the SSR Codes assignment Mode to flights entering the CCAMS area via the AoR will be done automatically at a given duration prior to entry or whether the code will be assigned only when requested.

b)Exit SSR Code Release Time.

Indicates the time duration in minutes stating the earliest time when the release of an SSR code will be done after a flight exits the CCAMS Area.

Note:This is a default value for all of the AoR borders, but can be superseded by a specific value for a specific AoR.

c)Mode S disabled.

This flag needs to be set to No if Mode S is used operationally. CCAMS will use it to determine if the Mode S Conspicuity Code could be used.

1

Amendment date: 21 Mar 2016 / EDITION 12.0