Multi-Machining Co. Inc.
Equipment List
CNC Equipment
Qty (9) Leadwell MVI-20 CNC Mill (20”x14” Travel) (10,000 RPM Spindle)
Qty (5) Leadwell MV-30 CNC Mill (30”x16” Travel) (10,000 RPM Spindle)
Qty (1) Leadwell MV-30 CNC Mill (30”x16” Travel) (10,000 RPM Spindle)
(With Golden Sun 4th Axis)
Qty (2) Leadwell V-40IT 5 Axis CNC Trunion Mill (15,000 RPM Spindle)
Qty (1) Leadwell V-20IT 5 Axis Trunnion Mill (15,000 RPM)
Qty (3) Leadwell V30IT 5 Axis Trunnion Mill (15,000 RPM)
Qty (2) Leadwell MCV-50 CNC Mill (50”x25” Travel) (12,000 RPM Spindle)
Qty (1) Samsung 40 & 20 CNC Mill (10,000 RPM)
Qty (3) Kitamura HX-300&400 4 Axis Horizontal CNC Mill
(12”x12”x21” Travel)
(20,000 RPM Spindle)(2,000 IPM Rapid Traverse)
(Pallet Change System with (2) Four-Sided, Double Vise Tombstones)
Qty (1) Leadwell LT-25 CNC Lathe (4” Thru, 14” Chuck & 12 Tools)
Qty (4) Leadwell T-6 CNC Lathe (2 1/2” Thru, 8” Chuck & 10 Tools)
(All LathesHave High Torque Spindles & 1,000 Ipm Rapid)
(Some have Live Tooling)
Qty (1) Leadwell T-7 CNC Lathe (2 ¾” Thru 8” Chuck & 12 Tools)
Qty (1) Takamaz 6Axis CNC Lathe (Double Spindle)
Computers for Programming
Qty (6) IBM Compatible PCs for Programming Our Equipment. At The Present Time We Are Using Virtual Gibbs Software. We can accept any format thru E-Mail.
Page(2)
Manual Equipment
Qty (1) Pasma Manual Vertical Mill
Qty (1) Round Tower Manual Vertical Mill
Qty (1) Bridgeport Manual Vertical Manual Mill
Qty (1) Cosen Programmable Saw
Qty (1) Wilton High Speed Cold Saw (3,700 RPM)
Qty (1) Kalamazoo 14” Cut Off Saw
Qty (1) Rockwell-Delta 16” Band Saw
Qty (3) Various Size Belt Sanders
Qty ( 15) Bench Grinders & Deburr Wheels
Qty (5) Vibratory Deburr Tumbler
Qty (1) Earth-Chain Tumbler & Polisher
Numerous Hand Tools
Page (3)
Inspection Equipment
Qty (2) Brown & Sharpe 30” Tesa-Hite with Probe Kit
Qty (1) Zeiss CMM 48x40 (Scanning & Probe)
Qty (1) Browne & Sharpe 7-10-7 CMM
All CMMs have fully automatic
Articulating heads of the highest quality available
Qty (1) Browne & Sharpe4-5-4 CMM
Qty (1) Browne & Sharpe 4-5-5 CMM
Qty (1) Mitutoyo 48” Digital Heighth Gage
Qty (1) Brown & Sharpe 10” Sine Plate
Qty (1) 48”x96” Surface Table (Grade A)
Qty (1) 36”x48” Surface Table (Grade A)
Qty (1) Mitutoyo Surface Tester (With Printer)
Qty (1) Togoshiseiki Hardness Tester
Qty (1) .061 To .750 Check Pins (-.0002)
Qty (1) 1/16” To 7/8” Deltronic Gage Pins (.0001 Increments)
Qty (2) Carl Mahr Dial Bore Gages (1/16” To 4”)
Qty (1) Mitutoyo Intra Mics (.800 to 1.000)
Qty (1) Mitutoyo Intra Mics (1.000 to 1.200)
Qty (1) Brown & Sharpe Intra Mics (1.600 to 2.000)
Qty (1) Mitutoyo Intra Mics (1.400 to 1.600)
Qty (1) .250 to 1.625 Ringmaster Gage Setter
Qty (1) Set of Mitutoyo inside Mics (.500 to 2.000)
Qty (1) set Of Starrett inside Mics (2.000 to 7.000)
Page (4)
Qty (1) Brown & Sharpe Depth Mics (.000 to 6.000)
Qty (1) Mitutoyo Depth Mics (.000 to 6.000)
Qty (1) Mitutoyo Deep Throat Mics (.000 to 1.000)
Qty (1) Fowler Gage (Joe) Blocks (.1001 to 4.000)
Qty (1) Mitutoyo Gage (Joe) Blocks (.1009 to 4.000)
Qty (1) Starrett 4” Protractor
Qty (1) Brown & Sharpe 14” Square
Qty (1) Starrett 6” Square
Qty (1) Shamrock Angle Plate (10”x6”x4”)
Qty (1) Taft Freier Angle Plate (8”x5”x4.5”)
Qty (1) Set of Brown & Sharpe OD Mics (.000 to 6.000)
Qty (1) Misc Qtys of Thread Plug Gages (0-80 to .625-18)
Qty (1) Misc Qtys of Thread Ring Gages (2-56 to 1.000)
Qty (1) Misc Qtys & Sizes of Pipe Plug Gages
Qty (1) Misc Qtys & Sizes of Heli-coil Plug Gages
Qty (1) Misc Qtys & Sizes of Metric Plug Gages
Qty (1) Brown & Sharpe Bench Mics (.00005 Increments)
Qty (4) Various Brands of 12” Calipers
Qty (1) Mititoyo Optical Comparitor
Qty (1) Micro-Vu 6”x6” Inspection Microscope
Various Height Gages, Travel Indicators & Hand Tools
As With Any Reputable Mfg Company, We Are Constantly Trying To Improve Our Facilities To Adhere To Our Customers Growing Requirements. We are an AS9100 Rev C Certified Supplier. We Are On Several Defense Contractors Preferred Supplier List, Which Is Very Hard To Achieve.
A Little History
Multi-Machining was established in 1994 in Garland, Tx. and we resided there until July of 2000, at which time we built a new facility in Wylie, TX.
The building we built is 15,000 sf. and was totally designed to be a manufacturing facility. In the past and present we have almost serviced every industry in the market from Defense to Semi-Conductor to Telecom to Mail sorting to Robotics. I think anyone that visits our facility will be impressed with what we have established in such a short time. We deliver quality parts on time and at a fair price. (2018) Plans are to start a new facility in Wylie mid-year (35,000 SF). Please call and visit our facilty any time.
Thanks
Tony Linduff- President