Wp65lb N2 Booster Data Sheet

WP65LB N2 BOOSTER DATA SHEET

WP65LB Data Sheet
Flow and Power / Operating Pressure / Speed / UNITS
1470 RPM (50 Hz)
300 psig
(90 psig Inlet Pressure) / 86 / [Scfm]
14 / [HP]
450 psig
(90 psig Inlet Pressure) / 83 / [Scfm]
20 / [HP]
500 psig
(90 psig Inlet Pressure) / 81 / [Scfm]
21.5 / [HP]
580 psig
(90 psig Inlet Pressure) / 80 / [Scfm]
23.5 / [HP]
Inlet pressure / 60 psig / 75 psig / 90 psig / 100 psig / 115 psig
VOLUME multiplier Vf / 0.70 / 0.85 / 1.0 / 1.15 / 1.35
POWER multiplier Pf / 0.85 / 0.95 / 1.0 / 1.05 / 1.07
Technical Specifications / Motor rating / 30 / HP
Rated Current FLC / 38 / Amps
Weight of block and motor / 811 / Pounds
Noise level @ 3 ft / 85 / dB(A)
Heat dissipation / 63,400 / Btu/hr
Cooling air needed / 2,400 / CFM
Residual oil content at gas outlet (without filtration) / <5 / mg/m3
Delta temperature (gas oultet vs. ambient) / 20 / °F
Operational ambient temperature range / 41-131 / °F
Operating pressure range / 220 – 580 / psig
Oil sump capacity / 5.5 / Quarts
Dimensions of block and motor (L x W x H) / 50 x 26 x 36 / Inches
Cooling method / Air-Cooled
Drive type / Direct Drive
Stages/Cylinders / 1/2

*All data is with 5 % tolerance and is related to ambient conditions of 68 ° F and 14.7 PSIA.

Package Includes:

Feed tank run-permissive sensor (supplied loose)
Intercoolers and aftercooler
Oil and water separators after the 1st and2nd stages
Safety valve after each stage
1st and2nd stage pressure gauges
Solenoid valves (115 V / 50 Hz) for automatic drainage of the separators
Unloaded starting relief and automatic condensate drain system
Condensate demister to easily dispose of condensate drainage
Assembly of compressor and electric motor
Resilient mounts including drainage hoses and air/gas outlet hose
380/3/50 electric motor with IP 55 (TEFC) protection
Non-return valve mounted to air/gas outlet hose
Low oil level shutdown switch
High air/gas temperature shutdown switch mounted at the air/gas outlet of the compressor
Compressor control system (including motor starter) for starting/stopping the compressor, and monitoring the oil level, air/gas outlet temperature and outlet pressure of the compressor
Complete package wired and mounted on a skid
Air/gas pressure sensor for automatic start/stop (supplied loose)

Standard warranty is 15 months from date of shipment or 12 months after initial installation and start-up, whichever comes first. Ask your Sauer USA representative if your project requires an extended or alternative warranty period.

Optional equipment:

Final receiver packages with the necessary components supplied
Diesel motor driven
Modified for 50 Hz power supply
Customized controls for user specified monitoring and operation
Final air/gas filtration with varying levels of air/gas quality
Sound dampening canopy
Weather resistant canopy
Complete package rated for installation in a hazardous location (Class 1 Division 2, or Class 1 Division 1)

Sauer Compressors USA custom engineers solutions for our customers. Please inquire about options you may require which are not listed.