UEENEEE101A theory assessment instructions.
· The assessment is open book with no time limit
· To complete the assessment questionnaire you can either
o check the box by double clicking on the checkbox for the correct answer and selecting “checked” from the check box form, print the completed form and sign it, scan it and email it
o or print the questionnaire, complete the questions, sign, scan and email it
· Read through the accompanying text and then answer the questions
· Check all answers before returning the assessment
· These questions are the same as the questions in the text
Activity #1
1. Can anyone issue a permit within the organisation?
Yes No
2. Do all parties need to sign off on the permit before work can commence?
Yes No
Activity #2
1. Should you undertake a high risk task without a SWMS?
Yes No
2. Can a SWMS be used for multiple tasks on a worksite if it takes into account the changing nature of the work environment?
Yes No
Activity #3
1. Does effective isolation rely on? (choose the appropriate answer/s)
Isolation points being readily available/accessible
Having isolation procedures documented and accessible
The provision of instruction, information and training of electrical workers
Appropriate supervision to ensure safe work procedures
Activity #4
1. Should a person using electrical test equipment
Be suitably trained in its use
Ensure the test equipment is suitable for the job
Inspect the test equipment for damage before use
Activity #5
1. To reduce the risk of injury to yourself and others should you always follow safe work procedures
Yes No
2. Can you change a work procedure to make the job quicker?
Yes No
Activity #6
1. If you spot a hazard, choose three things you must do (Place a cross in the appropriate box/es).
Report it immediately to your supervisor
Wait until the end of your shift and then report it
Make everyone aware of it and put up a warning sign, if possible
Follow-up and make sure that the hazard has been fixed
Activity #7
1. Which of the following represents the hierarchy of control measures
Eliminating the risk, Substitution, Isolation, Engineering Controls
Isolation, Engineering Controls, administrative controls
Eliminating the risk, Substitution, Isolation, Engineering Controls, administrative controls, Personal Protective Equipment (PPE)
Eliminating the risk, Personal Protective Equipment (PPE)
Activity #8
1. All workplace Injuries, Accidents & Near Misses must be reported to your Supervisor.
True False
2. Employees are required to complete a hazard report form and forward to their supervisors as soon as practicable.
True False
Activity #9
1. Which of the below are your responsibilities as an employee?
Report any dangerous situation
Take reasonable care of their own health and safety, and for the safety of others in the workplace
Obey reasonable safety instructions
Work with the employer to improve safety at the workplace.
I certify the answers are all my own work
Trainee name______Signature ______date______
Assessed as competent by Tom Bunworth
Electrician licence No PGE133120
TAE40110 certificate No A10011939
UEENEEP008B certificate No 0220710
Signature ______date______