Paint Shop Interface (ROCO) Prerequisites Checklist
When complete, email the completed form to
The list of current Body Shop Management System partners can be found at http://www.ppg.com/coatings/refinish/en/colortools/retrieval/Pages/roco.aspx
Collision Center InformationShop name:
Shop CTS #:
Phone:
Body Shop Management System:
Please see special instructions at the end of this form.
BSMS Version:
Minimum Requirements for TouchMix PC
Windows Version: / XP Pro 32 Bit / Win 7 Pro 32 Bit
Paint Shop Interface (ROCO) will not run on Windows 2000 or Windows XP or 7 Home
Memory: / 2 GB / 1 GB / 512 M / 256 M
Note: Less than 2 GB should have additional RAM installed in order for Paint Shop interface (ROCO) to function well
If equipment is being replaced that needs to be done before the Paint Shop Interface (ROCO) install
Contact Information
Territory Manager: / Name:
Region: and Territory (D) #:
Phone:
Jobber: / Point of Contact:
Phone:
Body Shop: / Contact Name:
Position/Title:
Phone:
If the shop has an IT person: / Name:
Phone:
Who will be the Primary point of contact:
Installation: (Please Allow 3 to 5 Business Days)
Requested date of installation:
Who will be available on-site for the installation?
Are they aware of the schedule? / Yes / No
Will he/she be available for the entire install? / Yes / No
Is there a phone by the Touchmix? / Yes / No
Cell Phone reception/signal at the Touchmix is: / Good / Bad
Shop Network
Is the Touchmix on the shop’s network? / Yes / No
Is the network a workgroup?
(Some larger shops run a Windows Domain; in these cases it can be difficult to get the correct credentials for TouchMix login and drive mapping) / Workgroup
Windows Domain
What is an account that has credentials on the BSMS server to allow mapping a drive from the TouchMix
User name / Password
Is the network cable in place? / Yes / No
From the TouchMix, I can access:
(this confirms that the network and internet connection is working) / Google
Anti-Virus
Is Anti-Virus Software on the Touchmix PC? / Yes / No
Name of Anti-Virus Program(ex: Norton, MacAfee, AVG Free)
Body Shop Management Systems: Special Requirements:
Mitchell Repair Center
Has Repair center been upgraded to PPG 2.2 API? / Yes / No
What is the Shops ID for Mitchell Repair Center?
Summit
Have the following two forms been submitted to Summit for processing
http://suteg.net/pdf/PreInstallPPGPaintSCInterface.pdf / Yes / No
http://suteg.net/pdf/PPG_PMCI.pdf / Yes / No
Has summit set up their Paint Scale Interface? / Yes / No
Has summit set up their PMCI interface? / Yes / No
Is the DBSERVER mapped? What Is the Drive Letter? :
CCC One
Has the Repair Workflow Module been installed? / Yes / No
ROME
Has ROME Installed their Remote Desktop Connection? / Yes / No