Organic Intelligent Layered Feed

Organic Intelligent Layered Feed

ORGANIC INTELLIGENT LAYERED FEED

INGREDIENTS (Recommended)

  1. Worm castings (found at your local grow store)
  2. Pro-mix Hp(found at your local grow store)
  3. Karmacrops Organic layered feed
  4. Karmacrops Booster pack (if required)
  5. PH. Pen (found at your local grow store)
  6. PH. Up/Down (found at your local grow store)

Instructions 5-7 gallon pots or outdoor holes

  1. Mix 4 gallons of pro-mix to every gallon of worm castings in a large area. This will be your growing medium.
  2. In 5 -7 gallon pots or outdoor holes, add the equivalent of 1 third of the medium(pro-mix/worm casting mix). Making sure you compact the mediumdown.
  3. Add the bottom layer mixture to the mediumand mix well.Again, compact the medium down.
  4. Repeat step 2 by adding another 1 third of mediumand mix in the middle layer feed. Make sure to not disturb the bottom layer that was previously created. Compact mediumdown.
  5. Repeat step 3 by adding another 1 third layer of medium and mix in the top layer feed. Again, do not disturb the previous layer. Compact mediumdown and top up with more of the medium. Fully drench the pot or hole with PH’D water (as instructed in next section). Its time to add your seedling or clone to the final medium’s pot or outdoor hole.

Watering instructions

  1. Always check the PH. Of your water. It should be in the range of 6.5 to 7.
  2. Use PH. Up or down to adjust your waters PH.
  3. Using a moisture tester or simply your two fingers dug into the medium, determine if the plant requires watering. Generally, when Cannabis plants are small they require little amounts of water but as they grow they will require more frequent watering’s.

Booster Pack (Top Feed)Instructions 5-7 gallon pots or equivalent outdoor holes

  • To be added to the medium at the base of the plant when plant showing deficiencies during growth. Pour contents and till with fingers into medium,usually add early August when cultivating outdoors or if growing heavy feedingor extended flowering time Cannabis plants.

Flushing 1-2 weeks before harvest

  1. With PH. Water begin to water every 3 days with 3 times the volume of the pot or container to flush all un wanted feed and salts that have built up, during the life of the plant. For more information regarding drying and curing of dried Cannabis flowers please contact:

Karmacann Consulting

289-400-6026