OMA-AD-Lightweightm2m-V1 0-20131210-Cpage 1 V(12)

OMA-AD-LightweightM2M-V1_0-20131210-CPage 1 V(12)

Use of this document is subject to all of the terms and conditions of the Use Agreement located at

Unless this document is clearly designated as an approved specification, this document is a work in process, is not an approved Open Mobile Alliance™ specification, and is subject to revision or removal without notice.

You may use this document or any part of the document for internal or educational purposes only, provided you do not modify, edit or take out of context the information in this document in any manner. Information contained in this document may be used, at your sole risk, for any purposes. You may not use this document in any other manner without the prior written permission of the Open Mobile Alliance. The Open Mobile Alliance authorizes you to copy this document, provided that you retain all copyright and other proprietary notices contained in the original materials on any copies of the materials and that you comply strictly with these terms. This copyright permission does not constitute an endorsement of the products or services. The Open Mobile Alliance assumes no responsibility for errors or omissions in this document.

Each Open Mobile Alliance member has agreed to use reasonable endeavors to inform the Open Mobile Alliance in a timely manner of Essential IPR as it becomes aware that the Essential IPR is related to the prepared or published specification. However, the members do not have an obligation to conduct IPR searches. The declared Essential IPR is publicly available to members and non-members of the Open Mobile Alliance and may be found on the “OMA IPR Declarations” list at The Open Mobile Alliance has not conducted an independent IPR review of this document and the information contained herein, and makes no representations or warranties regarding third party IPR, including without limitation patents, copyrights or trade secret rights. This document may contain inventions for which you must obtain licenses from third parties before making, using or selling the inventions. Defined terms above are set forth in the schedule to the Open Mobile Alliance Application Form.

NO REPRESENTATIONS OR WARRANTIES (WHETHER EXPRESS OR IMPLIED) ARE MADE BY THE OPEN MOBILE ALLIANCE OR ANY OPEN MOBILE ALLIANCE MEMBER OR ITS AFFILIATES REGARDING ANY OF THE IPR’S REPRESENTED ON THE “OMA IPR DECLARATIONS” LIST, INCLUDING, BUT NOT LIMITED TO THE ACCURACY, COMPLETENESS, VALIDITY OR RELEVANCE OF THE INFORMATION OR WHETHER OR NOT SUCH RIGHTS ARE ESSENTIAL OR NON-ESSENTIAL.

THE OPEN MOBILE ALLIANCE IS NOT LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT, INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF DOCUMENTS AND THE INFORMATION CONTAINED IN THE DOCUMENTS.

© 2013 Open Mobile Alliance Ltd. All Rights Reserved.
Used with the permission of the Open Mobile Alliance Ltd. under the terms set forth above.

Contents

1.Scope (Informative)

2.References

2.1Normative References

2.2Informative References

3.Terminology and Conventions

3.1Conventions

3.2Definitions

3.3Abbreviations

4.Introduction (Informative)

4.1Version 1.0

5.Architectural Model

5.1Dependencies

5.2Architectural Diagram

5.3Functional Components and Interfaces/reference points definition

5.3.1Protocol Endpoints

5.3.2Interfaces

5.4Security Considerations

Appendix A.Change History (Informative)

A.1Approved Version History

A.2Draft/Candidate Version 1.0 History

Appendix B.Detailed Descriptions(Informative)

B.1LWM2M Entity Relationship Overview

B.2Multiple Server Connection Examples

Figures

Figure 1: Architectural Diagram

Figure 2: Relationship Type#1

Figure 3: Relationship Type #2

Figure 4: LWM2M Client Connecting with Multiple LWM2M Servers

Tables

No table of figures entries found.

1.Scope(Informative)

This document contains an architecture diagram, protocol endpoints description, interfaces definition and detailed descriptions for OMA DM Lightweight M2M enabler. The architecture diagram shows the client and server components in this enabler as well as the interfaces between these two components. Further more, it gives a short description for the functions of these interfaces. In order to help people understand the architecture comprehensively, some detailed information is described in Appendix B.

2.References

2.1Normative References

2.2Informative References

3.Terminology and Conventions

3.1Conventions

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in [RFC2119].

All sections and appendixes, except “Scope” and “Introduction”, are normative, unless they are explicitly indicated to be informative.

3.2Definitions

3.3Abbreviations

4.Introduction(Informative)

4.1Version 1.0

This enabler defines the application layer communication protocol between the LWM2M Serverand the LWM2M Client which is placed in theLWM2M Device.The OMA Lightweight M2M enabler includes device management and service enablement forLWM2M Devices. The target LWM2M Devices for this enabler aremainlyresource constrained devices. Therefore, this enabler provides a light and compact protocol as well as an efficient resource data model.

Client-Server architecture is introduced for LWM2M enabler. The LWM2M enabler has two components, LWM2M Server and LWM2M Client. Four interfaces are designed between these two components as shown below:

Bootstrap

ClientRegistration

Device management and service enablement

Information Reporting

5.Architectural Model

5.1Dependencies

There is no dependencies for the Lightweight M2M enabler v1.0.

5.2Architectural Diagram

Figure 1: Architectural Diagram

5.3Functional Components and Interfaces/reference points definition

5.3.1Protocol Endpoints

5.3.1.1LWM2MClient

TheLWM2M Client is a logical component residing in the LWM2M Device conforming to the requirements [LWM2M-RD] specified in this enabler. This LWM2M Client serves as an endpoint of the LWM2M protocol, and communicates with the LWM2M Server to execute the operations from the LWM2M Server for the device management and the service enablement.

5.3.1.2LWM2M Server

The LWM2M Server is a logical component residing within the M2M Service Provider or the Network Service Provider which serves as an endpoint of the LWM2Mprotocol.

5.3.1.3LWM2MBootstrap Server

The LWM2M Bootstrap Server is a logical component performing Bootstrap Provisioning over the air prior to Client Registration.

5.3.1.4SmartCard

Also known as UICC (consult [OMADIC]). A Smart Card is a portable tamper resistant device with an embedded microprocessor chip. It can store data and applications along with security functions and mechanisms.

5.3.2Interfaces

5.3.2.1LWM2M-1Bootstrap

This interface is used for the LWM2M Server to provision bootstrap information into the LWM2M Client.

5.3.2.2LWM2M-2Client Registration

This interface is used for adding the information of the LWM2MClient to the LWM2M Server so that remote access and management to the LWM2M Client is achievable

5.3.2.3LWM2M-3 Device Management and Service Enablement

This interface is used for the device management and M2M service enablement. This interface can convey commands and response or status of the commands between the LWM2M Server and the LWM2M Client. This interface is transportagnosticand independent from the underlying network.

5.3.2.4LWM2M-4 Information Reporting

This interface is used for the LWM2M Client to report resource information to the LWM2M Server. This Information Reporting can be triggered periodically orby events.

5.4Security Considerations

The Lightweight M2M enabler supports secure communication between the LWM2M Client and LWM2M Server. This secure communication contains authentication, authorization, data integrity, confidentiality and replay attach protection.

Appendix A.Change History(Informative)

A.1Approved Version History

A.2Draft/Candidate Version 1.0 History

Appendix B.Detailed Descriptions(Informative)

The architecture shown in the Figure 1in section 5.2only shows the essential entities for this enabler including two endpoints of the LWM2M Protocol: the LWM2M Client and the LWM2M Server. However, it might be useful to describe how these two entities are related to other entities (such as the M2M User, the M2M Service Provider, and the M2M Application) that are outofscope of this enabler. This can help the readers understand a big picture of how LWM2M Protocol can be adapted in the overall M2M deployment scenarios. The examples start with the basic scenario and also give some advanced scenarios covering useful cases in the real M2M deployments.

B.1LWM2M Entity Relationship Overview

This chapter describes relationship of entities in this enabler for reader to understand LWM2M enabler’s entities easily.

Figure 2: Relationship Type#1

Figure 3: Relationship Type #2

Figure 2 and Figure 3 show a typical deployment of the LWM2M entities. There are two relationship types depending on the scope of the M2M Service Provider. Figure 2 shows that the M2M Service Provider owns the LWM2M Server and the M2M Application both, and the Network Service Provider provides network communication between the LWM2M Client and the LWM2M Server only. Figure 3 shows that the Network Service Provider owns the LWM2M Server and the LWM2M Server connects to the M2M Service Provider which has the M2M Applications. One M2M Application residing within the M2M Service Provider can connect with multiple LWM2M Clients to provide M2M services. With these three entities, the M2M Application, LWM2M Server and LWM2M Client, the M2M Service Provider can give M2M services to the M2M User. The M2M User can get M2M services by connecting the M2M Service Provider.

B.2Multiple Server Connection Examples

This chapter describes the connection of a LWM2M Client and multiple LWM2M Servers.

Figure 4: LWM2M Client Connecting with Multiple LWM2M Servers

Figure 4 shows that two LWM2M Serverscommunicatingwith one LWM2MClient.

With thisenvironment anM2M User can get M2M services from each M2M Application that connects to its own LWM2M Server. Therefore M2M User may subscribe to different M2M Service Providers that run the LWM2M Servers. It can enrich the M2M Users’ experience by selecting multiple M2M Service Providers and get M2M services from them.

 2013 Open Mobile Alliance Ltd. All Rights Reserved.
Used with the permission of the Open Mobile Alliance Ltd. under the terms as stated in this document. [OMA-Template-ArchDoc-20130101-I]