Interpret and Use Numerical Information Including

Interpret and Use Numerical Information Including

UNIT CODE / CPCCLRG3002
UNIT TITLE / Licence to perform rigging intermediate level
MODIFICATION HISTORY / Release / Comment
1 / Supersedes and is equivalent to CPCCLRG3002A Licence to perform rigging intermediate level. Updated to align with the Standards for Training Packages.
APPLICATION / The unit specifies the outcomes required to perform intermediate rigging work safely.
Rigging work means:
a)the use of mechanical load shifting equipment and associated gear to move, place or secure a load using plant, equipment or members of a structure to ensure the stability of those members,
or
b)the setting up or dismantling of cranes or hoists.
This unit applies to the activities of a person performing intermediate rigging work involving any of the following:
a)rigging work included in the class of basicrigging
b)hoists with jibs and self-climbing hoists
c)cranes, conveyors, dredges and excavators
d)tilt slabs
e)demolition of structures or plant
f)dual lifts.
This unit requires a person performing intermediate rigging work to plan the task, inspect equipment, safely set up intermediate rigging task, safely erect intermediate structures and plant, and safely dismantle intermediate structures and plant.
Rigging work is undertaken in a range of industries where load shifting equipment and associated gear is used to move, place or secure a load using plant, equipment or members of a structure to ensure the stability of those members.
A person performing this work must hold anIntermediate Rigging High Risk Work Licence.
This unit is based on the licensing requirements of the Model Work Health and Safety (WHS) Regulations Part 4.5 High Risk Work and meets Commonwealth, state and territory high risk work licensing requirements.
PREREQUISITE UNITS / CPCCLRG3001 Licence to perform rigging basic level
COMPETENCY FIELD / Licensing
UNIT SECTOR / Not applicable
ELEMENTS
Elementsdescribe actionsoroutcomesthat aredemonstrableand assessable. / PERFORMANCE CRITERIA
Performance criteria describe the performance needed to demonstrate achievement of the element.
Where bold italicised text is used, further information is provided in the Range of Conditions.
1. / Plan intermediate rigging task. / 1.1. / Intermediate rigging task to be undertaken isreviewed and workplace-specific information related to the task is obtained.
1.2. / Hazards associated with the workplace and with the intermediate rigging task are identified.
1.3. / Risk control measuresand equipment are identified in accordance with workplace-specific information and the hierarchy of control.
1.4. / Forces and loadsassociated with erecting and dismantlingof intermediateriggingstructures and plant and associated intermediate rigging equipmentare calculated in consultation with associated personnel.
1.5. / Intermediaterigging equipment and associated gearare identified from workplace-specific information in consultation with associated personnel.
1.6. / Communication methods are established with associated personnel.
2. / Select and inspect intermediate rigging equipment. / 2.1. / Safety equipment is selected and inspected and personal protection equipment (PPE) is selected and fitted in accordance with workplace requirements.
2.2. / Intermediate rigging equipment and associated gear are selected and inspected in accordance with workplace requirements.
2.3. / Communication equipment is selected and inspected for serviceability.
2.4. / Defective equipment is isolated, reported and recorded in accordance with workplace requirements.
3. / Set up intermediate rigging task. / 3.1. / Workplace-specific information is communicated to associated personnel.
3.2. / Identified risk control measures and equipment are implemented in accordance with workplace requirements.
3.3. / Ground and foundation suitability is inspected in consultation with associated personnel.
3.4. / Intermediate rigging equipment and associated gear are positioned for work application and stability in accordance with workplace requirements.
3.5. / Temporary connections are applied in accordance with workplace requirements.
4. / Erect intermediaterigging structures and plant. / 4.1. / Intermediate rigging work is conducted safely in accordance with workplace requirements.
4.2. / Intermediate rigging structures and plant are erected in accordance with workplace requirements and workplace –specific information.
4.3. / Stability of intermediate rigging structures and plant is maintained during erection in accordance with workplace requirements.
4.4. / Communication methods are used to coordinate the intermediate rigging task.
4.5. / Intermediate rigging plant and rigging equipment is used in accordance withworkplace requirements.
4.6. / Temporary supports are connected to safely meet intermediate rigging task requirements.
4.7. / Completed intermediate rigging task is checked against task requirements.
4.8. / Excess materials are removed from the work area in accordance with workplace requirements.
5. / Dismantleintermediaterigging structures and plant. / 5.1 / Intermediate rigging dismantling task is conducted safely in accordance with workplace requirements.
5.2. / Stability of intermediate structures and associated plant is maintained during dismantling in accordance with workplace requirements.
5.3. / Intermediate rigging structures, plant, equipment and gear and safety equipment are inspected for defects and defective items are isolated and reported in accordance with workplace requirements.
5.4. / Intermediate rigging structures, plant, equipment and gear and safety equipmentare stored in accordance with workplace requirements.
5.5. / Risk control measures and equipment are removed.
FOUNDATION SKILLS
The language, literacy, numeracy and employment skills that are essential to performance that are not explicit in the unit are listed below.
Skill / Performance feature
Numeracy skills to: /
  • interpret and use numerical information including:
  • estimating and calculating forces and loadsassociated with erecting and dismantling structures
  • working load limit (WLL)
  • intermediate structural charts and plans
  • design plans including drawings

Reading skills to: /
  • interpret documents that include technical specificity including:
  • equipment manuals and manufacturers’ specifications
  • workplace requirements, including emergency plans
  • safe work method statements (SWMS)
  • permits and certifications
  • task plans and schedules and structural plans
  • interpret workplace signs and labels

Writing skills to: /
  • record information relating to performing intermediaterigging tasks, including equipment checklists and incident reports.

Communication skills to: /
  • use and interpret vocabulary specific to intermediate rigging and workplace requirementsat a level sufficient to communicate with other workplace personnel
  • communicate effectively with workplace personnel, including using:
  • verbal language
  • questioning to confirm understanding
  • written instructions
  • listening
  • hand signals
  • two-way radios

Self-management skills to: /
  • implement risk control measures
  • follow emergency plans

RANGE OF CONDITIONS
  • Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and local industry contexts) are included.

Workplace-specific information relates to the characteristics of a particular workplace and must include a safe work method statements (SWMS) and at least one of the following: /
  • local conditions including access and egress
  • permits and certifications
  • task plans and schedules and structural plans

Hazards must include: /
  • ground instability
  • overhead hazards
  • lighting
  • traffic
  • weather
  • pedestrian traffic
  • work required at heights

Risk control measures and equipment must include: /
  • traffic barricades and control
  • pedestrian barricades
  • personal protective equipment
  • adequate illumination
  • safety shutters and screens

Intermediate rigging structures and plantmust includeat least one of the following: /
  • concrete tilt-up panels
  • scenery panels
  • non-guyed light towers

Associated personnelmust include at least one of the following: /
  • other riggers
  • doggers
  • load-shifting plant operators
  • engineers
  • supervisors
  • colleagues

Workplace requirements relates to information types that relate to all industry workplaces, incorporate legislative requirements, and must include at least one of the following /
  • equipment and maintenance checklists
  • record system where service and maintenance history is kept
  • incident reports
  • workplace procedures, including emergency plans
  • equipment manuals and manufacturers’ specifications

Personal protective equipment (PPE) must include: /
  • hard hat
  • safety boots
  • gloves
  • high-visibility clothing
  • breathing, hearing, sight, skin and sun protection

Intermediate rigging equipmentmust include at least one of the following: /
  • scaffolds
  • elevated work platforms
  • personnel box
  • cantilevered crane loading platforms
  • mast climbers
  • safety screens and shutters
  • non-slewing cranes
  • mobile slewing cranes
  • vehicle loading cranes
  • tower cranes
  • self-erecting tower cranes
  • portal boom cranes
  • derrick cranes
  • bridge and gantry cranes

Associated gear must include: /
  • power and manually operated lifting gear
  • lifting clutches
  • tag lines
  • flexible steel wire rope (FSWR)
  • chains
  • wire and synthetic slings
  • shackles
  • terminations
  • wedge sockets
  • eye bolts
  • beam clamps
  • plate clamps
  • rope grips
  • turnbuckles
  • rigging screws
  • chain blocks
  • lever blocks
  • lever-action winches
  • sheaves
  • spreader bars
  • lifting beams
  • jacks
  • levers
  • skates
  • wedges
  • rollers
  • girder trolley

Safety equipmentmust include: /
  • safety harness
  • energy absorber
  • lanyard
  • inertia reel
  • static safety lines

Communication equipmentmust include at least one of the following: /
  • two-way radios
  • whistles

Ground and foundation suitabilitymust include at least one of the following: /
  • rough, uneven ground
  • backfilled ground
  • soft soils
  • hard compacted soil
  • rock
  • bitumen
  • concrete
  • suspended concrete floors
  • building roofs
  • landings
  • ground bearing pressure.

Temporary connectionsmust include at least one of the following: /
  • knots
  • bends
  • hitches
  • splicing

UNIT MAPPING INFORMATION / CPCCLRG3002A Licence to perform rigging intermediate level
LINKS / Hyperlink to Companion Volume Implementation Guide

Assessment Requirements

UNIT CODE / CPCCLRG3002
UNIT TITLE / Licence to perform rigging intermediate level
PERFORMANCE EVIDENCE / A person who demonstrates competency in this unit must satisfy all the requirements of the unit of competency elements, and associated performance criteria, foundation skills and range of conditions on each occasion and provide evidence of:
  • safely performing five rigging tasks at anintermediate levelincluding:
  • one of the following cranes:
  • adding and removing a tower crane section
  • adding and removing a crane lattice boom section
  • erecting a non-guyed tower
  • one the following lifts:
  • performing a multiple crane lift
  • a multiple winch lift
  • a combination of a crane and winch lift
  • one of the following lifts:
  • lifting and installing a series of tilt-up panels
  • lifting and installing a series of scenery panels
  • one of the following demolitions:
  • demolishing or removing a series of tilt-up panel structures
  • demolishing or removing a series of scenery panel structures
  • demolishing a concrete encased structural steel column and beam.

KNOWLEDGE EVIDENCE / Evidence required to demonstrate competency in this unit must be relevant to and satisfy all the requirements of the elements and performance criteria and include knowledge and application of:
  • Commonwealth, state or territory and local government WHS/OHS legislation, standards and codes of practice for undertaking intermediate rigging activities
  • requirements for hazard identification, risk assessment and risk control applicable to intermediate rigging
  • hazards and risks control measures commonly encountered in intermediate rigging
  • the systematic process of eliminating and reducing risk to health and safety through the application of the hierarchy of control
  • minimum clearance distance from powerlines or electrical equipment as determined by relevant state authority or electrical supply authority
  • selection and use of personal protective equipment for intermediate rigging
  • safety equipment applicable to intermediate rigging
  • types and functions of intermediate rigging and associated equipment including selection, inspection, care, handling, application, storage and limitations
  • manufacturers’ specifications for plant and equipment use in intermediate rigging operations
  • workplace policies, procedures and practices applicable to intermediate rigging including:
  • adding and removing a tower crane section
  • adding and removing a crane lattice boom section
  • erecting a non-guyed tower including a light tower
  • performing a multiple crane lift
  • performing a multiple winch lift
  • performing a combination of a crane and winch lift
  • lifting and installing a series of tilt-up panels
  • lifting and installing a series of scenery panels including for the entertainment industry
  • demolishing and removing a series of tilt-up panel structures
  • demolishing and removing a series of scenery panel structures
  • demolishing a concrete-encased structural steel column and beam
  • conducting pre- and post-operational checks of intermediate rigging equipment
  • the application, limitations, operation and safety requirements of:
  • hoists with jibs and self-climbing hoists
  • cranes, conveyors, dredges and excavators
  • tilt slabs
  • demolition of structures or plant
  • dual lifts
  • mathematical processes for estimation and measurement of loads for intermediate rigging
  • principles of plant, equipment and structural stability relating to intermediate rigging work
  • reasons for not using mobile phones for signaling purposes.

ASSESSMENT CONDITIONS / Assessments must be conducted by an assessor accredited for the IntermediateRigging High Risk Work Licence class in the Commonwealth/state/territory where the licence will be obtained (i.e. an assessor authorised by a Commonwealth/state/territory WHS/OHS regulator).
Assessors must satisfy applicable regulatory requirements which must include requirements in the Standards for Registered Training Organisations current at the time of assessment.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed.
Assessment of performance must be undertaken in the workplace or under realistic workplace conditions which reflect:
  • the use of full-scale, industry-standard equipment
  • performing tasks within timelines expected in a workplace
  • standard and authorised work practices, safety requirements and environmental constraints.
Assessment of this unit of competency must include the use of the National Assessment Instruments(NAI) issued by Safe Work Australia. These instruments include the requirement for assessments to be conducted in the English language.
Simulators must not be used in the assessment of this unit of competency.
Assessment must include access to:
  • rigging equipment and associated equipment in a safe conditionto meet the intermediate rigging specified in the Performance Evidence
  • safety equipment in safe condition
  • personal protective equipment (PPE)
  • communication equipment including fixed-channel two-way radios
  • associated personnel to assist with intermediate rigging task
  • workplace information applicable to intermediaterigging, including:
  • equipment and maintenance checklists
  • record system where service and maintenance history is kept
  • incident reports
  • workplace procedures, including emergency plan
  • equipment manuals and manufacturers’ specifications
  • risk control measures and equipment.

LINKS / Hyperlink to Companion Volume Implementation Guide

1

Top View