For Safety Roadside Rest Areas, Use SSP 10802

10801B_04-01-09

Page 1 of 4

USE WITH 2006 STANDARDS.

Use with all buildings (except Safety Roadside Rest Areas) for toilet and shower room accessories.

For Safety Roadside Rest Areas, use SSP 10802.

12-10.__TOILET AND SHOWER ACCESSORIES

PART 1 - GENERAL

Scope: This work shall consist of furnishing and installing toilet and shower accessories in accordance with the details shown on the plans and these special provisions.

SUBMITTALS

Product Data: Manufacturer's descriptive data, installation instructions, and details shall be submitted for approval.

QUALITY ASSURANCE

Regulatory Requirements: Accessibility products shall conform to Accessibility to Public Buildings, Public Accommodations, Commercial Buildings and Publicly Funded Housing, 24 CA Code of Regs Pt 2 §§ 1101B-1135B. Grab bars and folding shower seats shall conform to Grab bars, tub and shower seats, 24 CA Code of Regs Pt 2 § 1115B.7.

Certificates of Compliance: Certificate of Compliance shall be furnished for grab bars and folding shower seat in conformance with the provisions in Section 61.07, "Certificates of Compliance," of the Standard Specifications. Certificate of Compliance shall include written confirmation that the grab bars and folding shower seat, backing, mounting devices, fasteners and their installation conform to the requirements in Structural strength, 24 CA Code of Regs Pt 2 § 1115B.7.2.

Paras 10 thru 24, use only products shown on the plans.

PART 2 - PRODUCTS

Toilet Tissue Dispenser: Toilet tissue dispenser shall be dual roll, surface mounted, stainless steel with satin finish, and approximately 6"x11-1/2"x6" in size. Dispenser shall utilize standard toilet tissue rolls. The top roll shall automatically drop into place after the bottom roll is depleted. One dispenser per toilet stall.

Combination Paper Towel Dispenser and Waste Receptacle: Combination paper towel dispenser and waste receptacle shall be semirecessed, stainless steel with satin finish, and approximately 17"x56"x7-1/2" in size with 4inch skirt. The paper towel dispenser shall have a capacity of 1,000single fold paper towels. The waste receptacle shall have a capacity of at least 8gallons. Quantity shall be as shown on the plans.

Toilet Seat Cover Dispenser: Toilet seat cover dispenser shall be surface mounted, stainless steel with satin finish, approximately 15"x11-1/2"x2" in size. One dispenser per toilet stall and wheelchair accessible compartment.

Napkin Receptacle: Napkin receptacle shall be surface mounted, stainless steel with satin finish, hinged top and bottom, approximately onegallon capacity container with disposable liner. One receptacle per women's toilet stall.

Waste Receptacle: Waste receptacle shall be surface mounted, stainless steel with satin finish, and a capacity of at least 12 gallons. One receptacle per toilet room.

Clothes Hook: Clothes hook shall be stainless steel with two prongs. Quantity shall be as shown on the plans.

Paper Towel Dispenser: Paper towel dispenser shall be surface mounted, stainless steel with satin finish, with a capacity of 1,000single fold paper towels. One dispenser per lavatory.

Paras 17 and 18, some lavatories may require both types of soap dispensers. Edit last sentence to match plans.

Liquid Soap Dispenser: Liquid soap dispenser shall be surface mounted, heavy-duty plastic dispenser for industrial use with a capacity of at least 24ounces. Maximum operating force shall be 5 pounds. One dispenser per lavatory.

Powdered Soap Dispenser: Powdered soap dispenser shall be surface mounted, white enameled sheet steel dispenser with a capacity of at least 30ounces. The dispenser shall have an adjustable soap dispensing mechanism and a lockable top. Maximum operating force shall be 5 pounds. One dispenser per lavatory.

Mirror, Wall Hung: Mirror, wall hung shall be Number1 quality, 1/4-inch thick, electrolytically copper plated float or plate glass mirror with nonmoisture-absorbing filler. Mirror shall have a heavy gage galvanized steel back and stainless steel frame. The frame shall have a satin finish and shall be mitered and welded and the corners shall be ground smooth. Fasteners shall not penetrate surfaces of the frame exposed to view. Mirror shall be guaranteed against silver spoilage for not less than 10years. Quantity shall be as shown on the plans.

Grab Bar: Grab bar shall be stainless steel with satin finish, and concealed, integral mounting flanges.

Combination Soap Dispenser-utility Shelf: Combination soap dispenser-utility shelf shall be stainless steel with satin finish. Liquid soap dispenser shall have a capacity of at least 100ounces and an unbreakable refill indicator. Maximum operating force shall be 5 pounds. Quantity shall be as shown on the plans.

22. Size must be shown on the plans.

Folding Shower Seat: Folding shower seat shall be factory fabricated in teakwood or solid phenolic with drainage slots, Type304 stainless steel tube frame with satin finish, wall bracket, and hinge. Teakwood slats shall be factory stained and varnished.

Shower Curtain: Shower curtain shall be flame resistant, one-way draw, nylon reinforced, antibacterial vinyl fabric. Curtain shall be approximately 72 inches x 72 inches.

Shower Curtain Rod: Shower curtain rod shall be stainless steel, fixed mounted shower rod with stainless steel mounting plates.

PART 3 - EXECUTION

INSTALLATION

Toilet and shower accessories shall be installed in accordance with the manufacturer's recommendations. Fasteners for mounting accessories shall be concealed and vandal resistant.

Expansion anchors shall be used for mounting accessories on masonry or concrete walls.

Toilet and shower accessories shall be mounted after painting work is complete.

All toilet room accessories shall be mounted plumb, secure, and rigid.

Grab bars, folding shower seats, and their fasteners shall be installed in conformance with the requirements in Grab bars, tub and shower seats, 24 CA Code of Regs Pt 2 § 1115B.7.