Shenzhen Innovate Smart Energy Electronics Technology Co., Ltd

Shenzhen Innovate Smart Energy Electronics Technology Co., Ltd.

SPECIFICATION FOR APPROVAL
CUSTOMER：
CUSTOMER P.N.：
MODEL NO.： LSS-210-HP128A
VER：2.0
SAMPLE DATE：
Manufacture signature / Customer authorized signature
Drawing / Checked / Approved / Confirmation / Checked / Approved
Company stamp: / Company stamp:
E.C.LIST
VER. / Description of Change / Date of Changing / ECN NO.
Before / After
1.0 / Original Release / 2014.4.21
2.0 / Surge Immunity
L-N/,L/N-G:4.5KV / Surge Immunity
L-N/,L/N-G:10KV / 2015.3.18
Content

Sketch……………………………………………………………………………………4
Input Characteristics ………………………………………………………………4
Input Parameter……………………………………………………………4
Line Voltage Surge……………………………………………………………4
Inrush Current (cold start)…………………………………………………4
Power Factor …………….……………………………………………………5
Output Characteristics…………….…………………………………………………6
Output Parameters…………………………………………………………6
Power Efficiency …………………………………………………………7
Protection……………………………………………………………………………7
Special features……………………………………………………………………8
Functional Description……………………………………………………8
System standard variable…………………………………………………8
Safety & EMC Compliance………………………………………………………8
The safety standards.………….…………………………………………...8
EMC Standards .……………….….…………………………………………...9
Communications-related standards…………..…………………………...9
Dielectric Strength…………..….…………………………………………9
Leakage Current…………..…………………………………………………10
Insulation Resistance…………..…………………………………………10
Environmental………………………………………………………………………10
Reliability Requirements……………………………………………………10
Burn-in…….…………………………………………………………………10
MTBF Qualification………………………………………………………10
Life …………………………………………………………………………10
Waterproof…….………………………………………………………………………10
RoHS/RoHS…………………………………………………………………………10
Certification…………………………………………………………………10
Mechanical structure…………………………………………………………11
Package structure………………………………………………………………12
Package, Transportation, Storage…………………….………………………14
Matters of Use……………………………………………………………………14
Maintenance…………………………………………………………………15

1.Sketch
This specification described the electrical, mechanical and environmental specifications of aBuilt-in PLC "neuron" chip incorporating ISO/IEC stand；Microprocessor Control, Soft Start & Soft Handoff；210W AC-DC LED power supply for street lighting;30%～100% Lamp power step-less dimming. Protection level IP67; 5 years warranty.
2.Input Characteristics
2.1.Input Parameter
Parameter / Min / Nom / Max / Unit / Conditions
Rated input voltage / - / 220 / - / Vrms
Input Voltage (Spec. Compliance) / 180 / - / 240 / Vrms
Input Voltage (Safety Compliance) / 165 / - / 265 / Vrms
Input Frequency / 47 / 50/60 / 63 / Hz
Input current / 0.26 / 1.02 / 1.41 / Arms
Input power / 70 / 225 / 233 / W
Total Harmonic Distortion （THD） / 10 / 12 / 15 / %max / Min@165Vac
Max@265Vac
Average standby power / - / - / 2.5 / W / @220Vac
Note: Measured At 25℃ ambient temperature, the working condition is thermal stable.
2.2.Line Voltage Surge
When power supply is operating at minimum or maximum load, input surge voltage
should not beyond 310Vac/60 seconds,otherwise the power supply could be damaged.
2.3.Inrush Current (cold start)
65Amax. @ 220Vac
2.4.Power Factor:
2.4.1.Typical value of Power Factor
Operating conditions / PF / Note
Typical
Input
voltage / 165Vac / 0.996 / Measured at ambient temperature 25℃,100% load, the working condition is thermal stable.
220Vac / 0.978
265Vac / 0.958
Output power / 100% Power / 0.978 / Measured at 25℃ ambient temperature,220Vac the working condition is thermal stable.
60% Power / 0.961
30% Power / 0.924
2.4.2.V-P Factor Curve

3.Output Characteristics：
3.1.Output Parameters
Project / Value
Normal output current / 3.88A(±3%)
Rated output voltage / 54Vdc
Minimum output / 48Vdc (±3%)
Maximum output Voltage / 58Vdc(±3%)
Rated output power / 210W
output powerrange / 60-210W
Ripple & Noise / 1.45Vp-pmax.
(measured at 20MHz bandwidth and the output is paralleled with a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor)
Line regulation / The line regulation for output current is less than2% when the line voltage changing from minimum input voltage to maximum input voltage
Load regulation / The load regulation for output current is less than3% when load voltage changing from minimum output voltage to rated output voltage
Turn on delay time / Less than 1.1 S at rated input voltage and 100% load
Rise time / The output voltage should rise from 10% to 90% Vo within 50mS at rated input voltage and 100% load.
Hold up time / More than 3S at rated input voltage and 100% load.
Note: Measured At 25℃ ambient temperature,220Vac, Rated load；
the working condition is thermal stable.
3.2.Power Efficiency
3.2.1.Typical value of Power Efficiency
Operating conditions / Efficiency / Note
Typical
Input
voltage / 165Vac / 92.2% / Measured at ambient temperature 25℃100% load, the working condition is thermal stable.
220V
c / 90.8%
265Vac / 88.2%
Output power / 100% Power / 92.8% / Measured at ambient temperature 25℃,220Vac,
the working condition is thermal stable.
60% Power / 91.3%
30% Power / 88.8%
3.2.2.V-P Efficiency Curve

4.Protection
Items / Description
Output open or short circuit protection / The Power Supply will enter latched shutdown when Output open or short.
Load voltage is beyond the scope of protection / The Power Supply will enter latched shutdown when Load voltage is ＞58Vdc(±3%) or ＜45Vdc(±3%).
Over temperature
protection / ThePower Supplywill auto-shutdown o/p voltage if the inner temperature reaches 95℃ (±5℃)，then auto-restart if the inner temperature falls to 70℃ (±15℃).
Input over or under voltage protection / The Power Supply will enter latched shutdown if input voltage is over 269V(±4V) or under 161V(±4V).
Note：Oncethe ballastenters “latched shutdown” mode, it must be restarted or receivea startingsignal to be restored.
5.Special features：
5.1.Functional Description
LED drive power embedded ISO/IEC standard power line carrier communication
control chip;Can be linked to street lamp controlnetwork system, each power
monitoring node operation.
5.2.System standard variable
PLC street lighting system’s Standard variable and
Control/Monitor/Warning Description
Items / Standard variable
Control / 1. LED Drive Power：ON/OFF
2. LED Drive Power：Dimming(30%~100% step-less dimming)
Monitor / 1.Supply Voltage
2.Lamp Voltage
3.Supply Current
4.Lamp Current
5.Input Power
6.Power Factor
7.Power supply Temperature
8.Power supply Run Hours
9.Energy Consumption
Warning and Protection / 1.Supply Voltage too High/Low
2.Supply Current too High/Low
3.Lamp Voltage too High/Low
4.Lamp Current too High/Low
5.Power too High
6.Power Factor Low
7.Power supply Temperature too High/Low
Note: 1.Variables and parameters are based on the actual software
configuration and customer demands.
2．Monitor system existence errors: power, voltage, current ＜±5%;
Temperature ＜±5℃
6.Safety & EMC
6.1.The safety standards
Safety
Category / Country / Note
CE / Europe / EN61347-1, EN61347-2-13
UL/CUL / USA & Canada / UL8750 Compliance to UL1310 Class2, UL1012 UL953, CAN/CSA-C22.2 No. 0, CSA-C22.2 No. 107.1, CSA-C22.2 No
250.0
IEC / IEC61347-2-13
6.2.EMC Standards
EMC Items / EMC Standards / Note
Conducted Emission / EN 55015
Radiated Emission / EN 55015
Harmonic Current Emission / EN 61000-3-2 / Class C
Flicker Emission / EN 61000-3-3 / Clause 5
Electrostatic Discharge
(ESD) / EN 61000-4-2 / Contact discharge: ±4KV; Air discharge: ±8KV
Radiated Immunity / EN 61000-4-3 / 80MHz-1000MHz
3V/m 1KHz 80% AM
Electrical Fast Transients
(EFT) / EN 61000-4-4 / AC power ports:2KV; 5KHz
Surge Immunity / EN 61000-4-5 / DM 10KV, CM 10KV
Injected Currents / EN 61000-4-6 / 3Vrms (emf), 80%, 1KHz, Amp. Mod.
Power Frequency Field / EN 61000-4-8 / 10A/m
Voltage Dips and
Interruptions on AC / EN 61000-4-11 / 30% reduction for 10per; 100% reduction for 0.5per.
6.3.Communications-related standards
EN 50065-1: Frequency bands and EMC
EN 14908：Control network protocol
ISO/IEC 14908-1: Open data communications, network protocols
ISO/IEC 14908-2: Twisted pair communication
ISO/IEC 14908-3: Power line channel specification
ISO/IEC 14908-4: Specifies the transporting of the control network
Protocol (CNP) packets for commercial local area control
Networks over internet protocol (IP) networks using a
Tunneling mechanism wherein the CNP packets are
encapsulated within IP packets.
6.4.Dielectric Strength
530)Primary-to-Secondary: 3750Vac/10mA/60S is designed, but the power supplycan’t sustain 3750Vac because of the Gas Discharge Tube.
(1500Vac 3second full test for production.)
b)Primary to Earth: 1500Vac 10mAMax / 60second
(1500Vac 3second full test for production.)
c) Ifsafety certification is required, please contact our salesman, we can provide samples without GDT.
6.5.Leakage Current
0.5mA max. at 165~265Vac/50~60HZ
6.6.Insulation Resistance
50MΩmin.(I/P-O/P; I/P-FG; O/P-FG 500Vdc )
7.Environmental
7.1.Temperature
Condition / Minimum / Maximum / Unit
Operating / -35 / +65 / ℃
Storage / -40 / +85 / ℃
7.2.Humidity
Condition / Minimum / Maximum / Unit
Operating / 10% / 100% / RH
Storage / 5% / 100% / RH
7.3.Vibration
10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z.
8.Reliability Requirements
8.1.Burn-in
The power should burn-in at least 4 hours under full load condition and ambient temperature of 40℃± 5℃
8.2.MTBF Qualification
The MTBF should be at least 80,000 hours with 220Vac input and 80% load at 65℃.(Already finished 200 hours,220Vac,80% load test at 65℃.)
8.3.Life
Under rated ambient temperature of45℃ and 220Vac input, the theoretical service life is about 30,000 hours.
9.Waterproof
IP67 standard
10.RoHS
Meet RoHS standard.
11.Certification
CE and CCC
12.Mechanical structure
12.1.Dimension and cable
Item / Parameter / Remark
Dimension / L：238mm
W：68mm
H：47mm / Aluminium 6063 casing，
anodized surface，silver
Input cable： / 3*1.0mm²×400mm rubber cable Meet 60245IEC57(YZW)
CCC,VDE,ROHS / Brown: L
Blue: N
Yellow/Green: G
Output cable： / 2*1.0mm²×(200+200)mm rubber cable
Φ6.5-7.0mm², Pressure 500V
Meet H05RN-F,VDE,ROHS / Brown: LED+
Blue: LED-
12.2.Mechanical Dimension

13.Packaging structure
13.1.Inner box diagram
Items / Note
Material / K3K ,2mm thickness
RoHS compliant
Carton Dimension(L x W x H) / 271 x 100 x 45 mm
Color / Brown
Note：No rough edges, indentation, stain, damage etc.
13.2.Outer box diagram
Items / Note
Material / K8K ,6mm thickness
RoHS compliant
Carton Dimension(L x W x H) / 530 x 290 x 165 mm
Color / Brown
Note：No rough edges, indentation, stain, damage etc.

13.3.Package diagram

13.4.Pallet diagram

14.Package, Transportation, Storage
14.1.Package
The box should be marked on the product name, model, manufacturer identification, date of manufacture, etc.
14.2.Transportation
Vehicle, ship, aircraft, etc. carefully assemble and disassemble.
14.3.Storage
◈Product should be stored in the box when it’s not used ;
◈Storage ambient temperature: -10 - +40℃，Relative humidity: 10%-95%;
◈Harmful gases, flammable、explosive substances and corrosive chemicals are
not allowed to be in the warehouse, no strong vibration, shock and strong
magnetic are allowed;
◈Package box should be off the ground at least 20cm high, and at least 50cm
away from the walls , heat sources, windows.
◈Under the specified conditions, storage period is generally six months,
more than 6 months products should be retested。
15.Matters of Use
15.1.Check out
◈Check out if the equipment has been damaged during the transportation, retain
the packaging materials until all modular units of the ballast have been
checked and registered.
15.2.Using rules
◈Power supply should be used in the specified environment (refer to the spec);
◈Do not remove the cover or touch internal parts；
◈Do not replace any parts alone for safety reasons；
◈Do not use ballast in the volatile gases or flammable environment;
◈Turn off the power immediately if find any smoke or unpleasant odor during
using。
15.3.Safety note
◈First check if the AC input voltage of the working environment matches the
requirement in the specifications;
◈Do not power on if the AC voltage ＞265Vac or＜165Vac;
16.Maintenance
16.1.Warranty Period
Five years warranty, within the warranty period , any natural damage under normal use would be maintained by Our company for free, but any of the following statuses is not covered under the warranty：
◈Damages caused by Unauthorized repair;
◈Any arbitrary installation or modification；
◈Incorrect operation and use;
◈Abnormal environmental conditions exceed the requirements of
specifications；
◈Deliberate destruction;
◈Damages caused by irresistible natural disasters.
16.2.Maintenance Range
During the warranty period, all dis-functions due to materials and manufacturing errors, Our company will provide a free repair or replacement, including labor services and any necessary adjustment or replacement of components.
16.3.Limits Term
Our company is not responsible for any of the following terms and conditions:
◈If the ballast is damaged in return back;
◈Damages caused by fires, earthquakes, riots, wars, terrorist attacks,
acts of third party and other matters;
◈Damages caused by intentional or negligent misuse
◈Incidental damages emerge in use [ business interruption, benefits loss
(including loss of use of the instrument, costs caused by the replacement
of any equipment, device or service )];
◈In any case, such as operating, cleaning, etc., be sure to comply with safety
rules under the chapter 15; otherwise Our company is not responsible.

LLS-210-HP128AEmbeddedPLC210w Street lighting AC-DC LED drive power supply

1 / 15 V2.0