NZQF NQ Ref / 0847 / Version / 4 / Page1 of 5

National Certificate in Fibreboard Packaging (Carton Converting: Four and Six Corner Gluers) (Level 4)

Level / 4
Credits / 56

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

Version 4 of this qualification has been republished to extend the last date of enrolment on programmes from 31 December 2013 to 31 December 2016, also to extend the last date for assessment from 31 December 2015 to 31 December 2018.

Transition Arrangements

This qualification has been replaced by the New Zealand Certificate in Fibreboard Packaging (Level 4) [Ref: 1820].

The last date for entry into programmes leading to the replaced qualification is 31 December 2016. People currently working towards this replaced qualification must complete the requirements by December 2018.

For detailed information see Review Summaries on the NZQA website.

NZQF National Qualification Registration Information

Process / Version / Date / Last Date for Assessment
Registration /

1

/ May 2001 /

December 2007

Revision /

2

/ January 2004 / December 2018
Review /

3

/ February 2007 / December 2018
Republished /

3

/ November 2012 /

December 2018

Revision /

4

/ January 2014 /

December 2018

Republished /

4

/ November 2015 /

December 2018

It is the intention of Competenz that no existing trainee should be disadvantaged by these transition arrangements. Any person who considers they have been disadvantaged may appeal to Competenz using the contact details below.

Standard Setting Body

Competenz

PO Box 9005

Newmarket

Auckland 1149

Telephone0800 5261800

National Certificate in Fibreboard Packaging (Carton Converting: Four and Six Corner Gluers) (Level 4)

Level4

Credits56

Purpose

This national certificate is designed for people who are employed in the fibreboard packaging industry, and who have already completed the National Certificate in Fibreboard Packaging (Carton Converting: Straight Line Folder Gluer) (Level 3) [Ref:0054].

Holders of this certificate have demonstrated competence in the knowledge and skills required by industry to make ready and run a straight line gluer with attachments, as well as four and six corner gluers, for production. They have also demonstrated a knowledge of business and quality principles.

Replacement Information

This qualification replaced the National Certificate in Printing (Paperboard Packaging (Carton): Right Angle Gluer Four Corner) (Level 4) [Ref:0047] and the National Certificate in Printing (Paperboard Packaging (Carton): Straight Line Folder Gluer) (Level 4) [Ref:0048].

Special Notes

Prerequisite: National Certificate in Fibreboard Packaging (Carton Converting: Straight Line Folder Gluer) (Level 3) [Ref:0054], or equivalent knowledge and skills.

Credit Range

Level 3 credits

/ 10
Level 4 credits / 46
Total / 56

Requirements for Award of Qualification

This qualification will be awarded to people who have met the requirements of the compulsory section.

Award of NZQF National Qualifications

Credit gained for a standard may be used only once to meet the requirements of this qualification.

Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website:

Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard.

Detailed Qualification Requirements

Compulsory

All the unit standards listed below are required.

FieldManufacturing

SubfieldFibreboard Packaging

DomainCarton Converting

Id / Title /

Level

/

Credit

3682 / Make ready and run a straight line gluer with attachments for carton converting / 4 / 16
18245 / Make ready and run four and six corner gluers for carton converting / 4 / 30

DomainPrinting Production

Id / Title /

Level

/

Credit

20057 / Demonstrate knowledge of business and quality principles for printing / 3 / 10

Transition Arrangements

Version 3

Version 3 was republished in November 2012 to indicate that the qualification has been reviewed and replaced.

Version 3 was reviewed and issued to take account of changes resulting from the review of the Paperboard Packaging (Carton) unit standards.

Changes to structure and content

  • title of qualification has changed to reflect the reclassification
  • titles of unit standards 3682 and 18245 have changed
  • credits of unit standard 18245 have changed from 44 to 30
  • credit total has decreased from 70 to 56.

This qualification contains standards that replaced earlier standards. For the purposes of this qualification people who have gained credit for the expiring standards are exempt from the requirement to gain credit for the replacement standards.

Credits for / Exempt from
339 / 20057
3683, 3684, 3685, 3686 / 18245

Previous versions of the qualification

Version 2 was revised and issued in January 2004 to take account of changes resulting from the review of the core Printing Production unit standards. Unit standard 20057 replaced unit standard 339 and the credit total increased from 62 to 70.

Version 1 replaced the National Certificate in Printing (Paperboard Packaging (Carton): Right Angle Gluer Four Corner) (Level4) [Ref:0047] and the National Certificate in Printing (Paperboard Packaging (Carton): Straight Line Folder Gluer) (Level4) [Ref:0048].

Certification

The certificate will display the logos of the Qualifications Authority and Competenz.

Classification

This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below.

DAS Classification

/

NZSCED

Code

/

Description

/

Code

/

Description

423 / Manufacturing/Fibreboard Packaging / 030103 / Engineering and Related Technologies/Manufacturing, Engineering and Technology/Printing

Quality Management Systems

Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. Organisation with consent to assess and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Consent to assess requirements and the moderation system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.

Prerequisite Diagram

Competenz
SSB Code 101571 / New Zealand Qualifications Authority 2018