CURRICULUM VITAE
Personal Data:
Name: Ahmed Ismail El Sayed Mohammed
Nationality : Egyptian
Birth date: 23/3/1981.
Availability: after one month notice period.
Mobile no: 00974-33001422
Email: ahmed.
Military Service :( completed in 1/12/2004)
Marital Status: (married).
Language: bilingual in ArabicEnglish (spoke, write and read), Fair in French (spoke, write and read).
Permanent address :11 masjed nor eleman street, moubark avenue, zip code: 44835, zakazik city, sharkia province, Egypt.
Current resident address: halul street ,zip code 22256, Doha city, state of Qatar.
Driving license No : 28181806717(Qatar/GCC).
Objective:
I am metallurgical engineer and seeking to find a position as QA/QC Engineer/Welding Engineer/Inspection Engineer offshore & onshore, I am willing to work overseas and relocate. But I would prefer a permanent job.
YEARS of Experience:
Around 10 years in oil & gas, petrochemical and LNG plants.
Qualification Certifications
(1)CSWIP 3.2.2 Senior Welding Inspector with Radiographic interpretation for group A
(Ferritic Steels) Certificates no (51755). Expiry date is 11th December 2015
From TWI institute London, Visit verification.
(2)API 570Certified Piping Inspector –(Cert. no: 43323)Expiry date is 31st January 2015.
(3)API 653Certified Tank inspector –(Cert. no: 43871)Expiry date is 31st May 2015
(4)CSWIP 3.1 Certified Welding Inspector Cert. no (33395)Expiry date is 04 October 2012.
(5)Radiographic test (level 02) Cert no (097E/06/RT/DET/2012).
(6)Magnetic test (level 02) Cert. no (095E/05/MT/DET/2012).
(7)Dye PenterantTest SNT –TC -1A (level 02) Cert no (0134E/06/PT/DET/2012)The PT, MT and RT Certs from detection for welding and NDT consultant office, EgyptEng/abdellah hassanen Mobile :( +20103449707) Email: ().
(8)ISO 9001-2008 Lead Auditor from Bureau Veritas Egypt Cert. Serial No. :(LA2/11/EG/36415) Course No. A 17024 certified by (IRCA).
(9)Basic foundation of ISO 9001:2008 and introduction to quality management system QMS, From the British standard institute BSI in Doha Cert. no UAE-2010-9-25-1560.
(10) Internal auditor of ISO 9001:2008 From BSI in Dubai Cert. no UAE-2010-11-3-1927
(11)HDPE training from HEPWORTH Co.
(12) GRE-GRV training from AMAINTIT QATAR
OFFSHORE & HSE Certification:
(01) HUET & Sea survivalCert. No 102031211C4823,OPITO /QP Approved center(ENERTECH QATAR)
(02) H2SCert. No 51459014211211C4820OPITO /QP Approved center ( ENERTECH QATAR)
Certification in progress:
1-API 510 certified pressure vessel inspector –June6th. -2012(location: Qatar,waiting the exam results).
Educational Data:
Bachelor of Engineering Degree: metallurgical and material science engineering (5 years full time).
Faculty:Petroleum & mining engineering.
University:Suez Canal University.
Graduation Year: 5/2003.
Project:Cathodic Protection of Pipe Lines.
Project Grade: Excellent.
General Grade: Good.
Computer Skills:
1-M.S OFFICE (word-Excel-power point). Certificate in word from information technological centre
2-AUTOCAD (2 dimensions)
REFERENCE CONTACTS:
Available on request
Training:
1) Suez oil company (SUCO) 2)united industries-elsewedy (UIC).
Safety & Training Courses:
- First Aid, Fire Fighting, H2S Hazards, ASA (Advanced Safety Audit ), power sources Isolation , Stop Awareness, Hot Work, Defiance of Driving, Risk Assessments of work , PTW ( Permits Work ) confined space , hot , cold permit
1-PTW level 3 from Qatar petroleum
2-Commissioning PTW Safety Training from snaprogetti/ Gasco 3rd NGL terminal in UAE.
WORKING HISTORY:
Duration: From 11th AUGUST 2011 TILL NOW
Employer: ARCHIRODON CONSTRUCTION OVERSEAS QATAR
Client: Qatar petroleum (QP)
Consultant:GL
Contract Amount: US$ 200,000,000.
Location of Project: Halul Island-offshore, State of Qatar
Description of project Works:- EPIC of New Desalination Plant and Potable Water Storage Tanks at Halul Island
Designation: Site Qa/Qc Manager (Approved from Qatar Petroleum)
Responsibilities:
1.Developing new WPS & PQR ‘s as and when required
2.Maintaining all WPS & PQR records on file and for ensuring that they are suitably indexed & registered.
3.Maintaining the records of the entire welder’s on file ensuring that they are suitably indexed & registered.
4.Ensuring that welder’s qualification certificates are endorsed in accordance with code requirements.
5.Constantly review welding production activities to see where it may be possible to improve productivity by means of using automatic /semi automatic welding processes.
6.Assisting with improving welding production whilst maintain the highest level of weld quality as laid down in the applicable codes and client specification.
7.Trouble shooting and resolution of all welding related problem areas.
8.Assisting & advising on all welding related matters in preparation of project tenders
9.A. Monitors nondestructive testing examination results to determine defects, corrosion, mechanical damage, or blockages and makes recommendations for repairs or replacement as required.
B. Performs all tests and inspections on Tanks that has been repaired or modified to assure that the plate fabrication meets the manufacturers and/or QP's specifications and Industry (ASME/API/AWS) code requirements.
C. Performs all necessary inspections for the installation of hot tap, weld plus ends repair sleeves, or any welding that is required on piping or equipment while in service.
D.Preparation, issue and revision of the contract Quality Management Plan, Inspection/Verification Strategy and Assurance Strategies in conjunction with the Project Manager.
E-Witnesses hydrostatic and/or pneumatic tests on static equipment, which includes the review of hydrostatic packages.
F. Performs welder performance and welding procedure qualification records review.
G. Monitors all aspects of welding operation on new storage tanks.
H. Writes inspection reports, pre- and post-reports, worksheets, non-compliance reports and makes logbook entries of on-site inspection findings, as appropriate, ensuring that all hard copy and electronic databases are initiated and maintained.
K. Performs HDPE welder/Jointer performance and welding procedure qualification records review.
10.preparation of the QC procedure to be submitted along with bid such as (but not limited): Project quality plan PQP,Construction quality plan, preparation of NCR, CAR, Correspondence and punch list procedure,Supplier and procurement quality plan, review of prequalification of supplier, sub contractor,Design quality plan, preparation ofred line and as built drawing procedure, ITP, WPS, BPS, Work procedure and method of statements
Duration: From 11TH JULY 2009 TILL 1st AUGUST 2011:
Employer: ARCHIRODON CONSTRUCTION OVERSEAS QATAR
Client: Qatar petroleum (QP)
Consultant:Royal Hasckwing, Nakilat (Joint Venture between Qatar Petroleum And Ragas)
Contract Amount: US$ 140,600,000.
Location of Project: Port Of Ras Laffan, State of Qatar
Description of project Works:
Procurement & installation of mechanical and electrical services for Nakilat ship yard (phase 1 &2) and ship construction facility (phase 4), archirodon is the main contractor for the mechanical and electrical works, we supervising 4 subcontractors (Almoyeed/Sun Change /EMS /Scott Wilson)
Designation: Deputy Qa/Qc Manager / Qa/QcEngineer
Responsibilities:
• Developing and implement Project Quality Plans and procedures required to meet my clients quality Management system requirements
•Preparation and co-ordination of project Quality/specific procedures / Inspection & Test Planning
• provide QA support to Project Management to ensure activities comply with client corporate quality management system requirements and statutory requirements.
• Experience of the following:- Procedural Writing, Quality Control processes, and vendor/internal Auditing.
• Provide Quality leadership and direction to the project management and project team members Key accountabilities will include.
• Developing the Project quality standards, expectations, common processes and tools that the project teams will use to deliver world class quality performance in design.
• Conducting Quality audits/reviews across the project to determine gaps in my clients Management system requirements thereby driving improvement in the system.
• Traceability of Materials/Blasting & Painting and preparation, qualification of welding procedures, welder qualification involving CS, stainless steel, duplex stainless steel, Copper Nickel, Aluminum, dissimilar material, using SMAW,GTAW processes and able to maintain day-to-day QC records.
• Weld map Preparation, radiographic map, allocation of Field joints.
• Technical review of quotations/contracts for NDT subcontractor and follow up their invoices/performance.
• Evaluation and interpret results of submitted test reports for various basic NDT methods such MT, DPT, RT & UT.
•Ensuring Client quality requirements are complied with Liaison with Client on all Quality aspects of the project's
• Interpretation of more than 30,000 Radiographic films and WQT for more than 68 welders and 26 brazers
•Co-ordinate and review subcontractor Quality Plans and Quality Control Plans
•Ensure implementation of subcontractor Quality Plans throughout the Projects
•Inspection of Material/Products at Vendor, supplier premises /warehouse.
•Resolve any Quality related issues that may arise
•Participate/carry out Vendor/ Supplier Project Audits as per the Audit Schedule (in conjunction with the Quality Manager) and Surveillance Visits
•.Conversant with ASME, BS, ASTM, DIN, Qatar petroleum Preparation of pWPS, PQR/WPS/WQT, Repair procedures, Performance qualification(WQT) for welders/ brazers
•Compilation of Quality content of tender submissions in collaboration with Quality Lead, preparation of inspection for new project construction, setting ITP and review of pre-construction documents and drawings.
Address of all tender quality issues whether in risk workshops, commercial responses et.
•Reviewing the redline mark up of as built drawings, close follow up on documentation team under for preparing final documentation for Client.
• Preparation of test packs/final dossier of installed systems, Co-ordinate compilation and review of final documentation, Punch list of the new built system and coordinating with execution team and get clearance from client/consultant, preparation and clearance of mechanical handover certificates (MCC), Commissioning certificates (CCR) and final hand over certificates (FHC)
Duration: From 1ST OCTOBER 2008 TILL 17thJUNE 2009:
Employer: ARCHIRODON CONSTRUCTION OVERSEAS UAE
Ruwais 3rd NGL Train Project, Marine Works at GASCO’s Facilities, Abu Dhabi, U.A.E
Client: Abu Dhabi Gas Industries Co. (GASCO)
Consultant: GASCO, Abu Dhabi
Contract Amount: US$ 140,600,000(subcontract)
Description of project Works:
Engineering Procurement and Construction for:(Steel Jetty with two berths including topsides and buildings/Dredging./Seawater intake pipelines and bell mouths).
Designation: Mechanical Qa/Qc, Welding & Fabrication Engineer
Responsibilities and Tasks:
1-provide solutions to inspection problems at all facilities ,Transfer and implement new advanced inspection technologies facilities which include investigating the solutions to existing and potential inspection challenges, and planning and developing strategies in solving them; developing cost effective applications of new inspection technologies, and supervising the execution and implementation of them.
2- Provide the necessary back-up to the Quality Manager regarding contractual issues relating to Quality both during tender and project execution phase, Plan and allocate Quality functions to individual projects, Draws up a Quality Plan, Quality Control Plan and Project Quality Procedures which guarantee compliance with contractual requirements and ISO Standards. Liaises with Clients about Quality matters, Assess the suitability of vendors and sub-contractors for individual projects, Interface with responsible for inspection and control activities, Perform internal and external Project Audits, Assess the Quality Control Plans of sub-contractors and identify any necessary corrective measures, Provide Project personnel with the necessary Quality training, Monitor the collection of "As built" data for projects, Update internal department Database with all the information (Corrective Action Request-CAR, Non Conformity-NC etc.) coming from the project and the site and preparing annual statistic analysis, Approve documents made by Quality Control Personnel, Monitor the adequate close-out of NC, Defines Audit team, Initiate and promote all necessary corrective actions for any failure identified with project quality system
3- Prepare Welding procedures for assigned project; Review clients' specifications and scopes of work, examine pipe metallurgy and prepare detailed Welding procedures to achieve maximum productivity in accordance with specified quality; Administer systems for the qualification of weld procedures and welders; Review subcontractors' tender documents and technical qualifications; Review and approve subcontractors' Welding submissions; Ensure that records are maintained for all Welding activities to demonstrate achievement of client requirements; Maintain departmental project Welding files so that information is readily available to other department members; Liaise with the barge personnel and assist in optimizing work methods and troubleshooting where and when required; Monitor lay barge progress to identify opportunities for improvement; Maintain contact with welding equipment suppliers and consumable vendors to promote advances in welding technology, Support the development and formulates the basis for engineering studies in any of several basic or speciation
4-Plan, schedule and provide work direction as required for preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of all phases of very complex engineering problems.
5-Lead project execution for project proposal, initiatives, studies and continuous improvement of solutions and Problem solvers.
6-Discuss, coordinate and resolves problems with personnel throughout ADNOC and subsidiaries and with outside of company organizations.
7- Perform work and/or delegates work to other engineers for final development of specialized or technical proposals and proposed projects
8- performing analysis on complex data from field trials of advance NDT technologies; writing professional Engineering Report.
9- Check that reports are written according to established methods of good report presentation, Take recommendations for further study or report changes.
10-Coordinate with and assist the regional QA/QC Managers with the yearly staffing plan.
11-Coordinate/perform contract completion QA/QC audits.
12-Assist the quality manger with quality manual reviews, quality related issues, Responsible for improving the quality of the construction department processes
Duration: From 27th November 2007 till 1ST OCTOBER 2008 1ST
Employer: ALGHANIM INTERNATIONAL GENERAL TRADING & CONTRACTING (CLIENT) AGITEC
Location: az zour Kuwait
Project: emergency power plant 2008(epp008)1000 Megawatt (simple cycle)
This project one of the largest and fastest power project in gulf area, total cost 1 billion us$ because of it was executed in 6 month only which includes commercial commissioning.
Designation: Mechanical Qa/QcEngineer & Punch List Coordinator
Main client: Ministry Of Electricity And Water(KWUAIT)
Contractors:
A-ALSTOM Power for gas turbine engineering B-ABB electrical
C-KHARAFI STEEL for carbon steel tanks D-MINIMAX for fire fighting
E-R&H air intake engineering F-G&H for exhaust stack engineering
Responsibilities and Tasks:
1. Maintain safety mindset and actively engage fabricator in safety-related conversations during observation of construction activities
2.Monitors the skid, Piping and Equipment fabricators and erection team for construction activities from a technical perspective against contract specifications
3.Assists the QA/QC Manager in audits of fabricators compliance with procedures and specifications
4.Ensures that the skid, Piping and Equipment fabricators follow the Care, Maintenance, and Preservation procedures of the project and piping material supplier. Making a monthly audit of the equipment maintenance records to ensure that all procedures are being followed
5. coordinate between the fabrication and Commissioning team to ensure a smooth transition from construction to commissioning of all systems within his area of expertise, Completes in a timely manner all documentation to allow mechanical completion of Project.
6. Performs the following QC functions:
A. Witness key hold points during fabrication/erection /installation phase
B. Review x-rays, piping test packs, installation of materials including pipe, supports, and insulation,
C. Verifies pipe cleanliness after flushing
D. Performs a PID check before and after hydro test to ensure that no piping requirements are missing.
E. Witnesses bolt tensioning of the flanges and verify proper alignment thereof and tightening of all swage locks.
F. Ensures that dissimilar metal pipe are segregated and that proper tools are used on all pipe.
G-installation, erection and inspection of all gas turbine equipments/machinery parts including:
(Foundation anchor plates/Thermal block (including blow off valve & blow off silencer) /air cooled generator/air intake manifold/interconnecting pipes/acoustic enclosure/air intake system/exhaust gas system/system cleaning (flushing)/ e module & enclosure)
H-Monitoring the Installation, erection, welding and inspection of different types of steel structure/platforms/beams/columns/bracing/bridging with inspection points such as leveling, plumpness & torque tightening for the pipe rack of 5 units &Steel structure of electrical building
I- Fabrication, inspection & all QA/QC documents regarding pipes from 3/4" to 18"(CS, ST.ST)
In the work shop and existing plant
J- close follow up of Construction, erection, inspection activites and maintain peremenant and progressive QA/QC records for various tanks(fuel oil storage tank no 1&2/D.M. water storage tank no 1&2/Raw water tank)
4. Assists the project planner in the analysis of the fabricators schedule to ensure that project is able to meets its schedule commitments. Recommends corrective action if the project is behind schedule.
5. Assists the Quantity surveyors verify progress and assist in claim resolution
6-assure smooth hand over from the erection team to Alstom commissioning team which includes the following:
A-erection walk down for all the turbines parts
B- Coordination with the mechanical erection team to clarify the erection punch list
C-final walk down with Alstom erection lead advisor, top site manger, Alstom lead commissioning engineer and erection team for all parts of gas turbines
D- Immediate coordination with the erection team (mechanical, electrical and civil) for closing the minor open items during the final walk down.
E-clarification of final walk down from Alstom commissioning and erection team for all of open items in the punch list
F-collect all the documents that related gas turbines parts from the electrical quality control.
G-collect all the documents that related gas turbines parts from the civil quality control.
H- Reviewing the top files with the following:
1- Alstom top manger 2- Alstom technical field lead advisor
3- Alstom lead commissioning engineer 4- Alstom commissioning manger