BGPS DVR(Integration)

QuickInstallationGuide

Ver11.10.1

Digital Video Security System

Digital Video Recorder

*All contents of this document maychange without prior notice.

INDEX

1. Installation of DVRDriver /  / 2
2. Program Installation /  / 4
3. Configuration /  / 5
3-1. CreateVolume /  / 5
3-2. System Setup /  / 6
3-3. Camera Setup /  / 6
3-4. Run BGPSProgram /  / 6

Forward

QuickInstallationGuidedescribestheinitialinstallationprocedure.Thisprocedureisbriefly

segmentedinto3steps.

1.Installdriver(Software).

2.InstallBGPSsoftware.

3.Configurethesettingprogramto get volume creation andtoruntheMainProgram, whichissetto4channelviewasdefault.

Formoredetailedconfigurationandexplanation, please refer to “Installation and User’s

Guide”.

E-mail:

Tel:917-217-2913

Fax:718-491-2477

1. Installation of DVR Driver

Drivers for BGPSCAP,BGPSACAP, BGPSLIVCAP,

BGPSMPG,and BGPSMPGAMX can be installed by “installer.exe”,whichdeterminesDVRmodeland installsproperDriver.WhenHardwareWizard message shows up before the installation, click “Cancel”toclose.

OpenDriverfolderinCD-Romandrun“Installer”.

Click “Next”.

Followingisachartofdevicelist.(Dependingonmodel,differentdevice(s)willbedisplayed)

Model / DeviceList
CAPseries / DVR Capture
LIVCAPseries / DVR Live Capture
ACAPseries / DVRACapture Device
MPG series / DVR MPEG4
MPGAMXseries / Live MPEG Capture Device

Click“Install”.

Theabovepictureshowsupwheninstallationiscompleted.Click“Reboot”torestartthe

system. It is required to reboot the system to complete installation of drivers.

2. ProgramInstallation

Run“Setup.exe”.

(Choose the language for the software to be installed.)

Click“Next”.

Choosethepropermediaformat (NTSC or PAL) and continue byclicking “Next.”

The last letter of version indicates the type of board.

i.e.)CAP–C,LIVCAP–L,ACAP-A,MPG–M,MPGAMX–X

•USERNAME: MakeTopAdminusername.

•PASSWORD: MakeTopadminpassword.

•Confirm P/W: Confirmthepassword.

Note:OncetheTopAdminusercreated,itcannotbemodifiedfromUserAdminSetup.To change user name or password for Top Admin user, please refer to Appendix 1.DVR ManagementonInstallationandUser’sGuide.

Oncesetupofthesoftwarehasbeencomplete,thesystemwillneedtoberestartedtoallow thesettingstotakeeffect.

3.Configuration

Run“DVRSetting”.

3-1.CreateVolume

Click“Disktool”,inordertoreservethe spaceforDVRdatabase

Makenumberofvolumesdesiredat"Add Volume"andclick"Add".This configurationneedstobedoneforeach HardDisk.Clicking"CreateVolume" createsaBGPSfilesystemonallofhard disks.(Note:Leaveatleast5to10

volumeofmaxspaceallowed).

WhatisaVolume?VolumeistheunitusedbytheBGPSDBsystem.

1volumeisequivalentto65MBofphysicalHDspace.Allimagedataisrecordedinvolume units.WhenassignedVolumesarefull,theprogramwillcontinuerecordingbyoverwriting volumesthatcontaintheoldestpreviouslyrecordeddata.Itisrecommendedthatimportant databebackeduppriortothestartoftheoverwritingprocess.

3-2.SystemSetup

3-3.CameraSetup

3-4.RunBGPSProgram

•Initial screen:Numberofcamerashotsthat willbedisplayedwhensystemisstarted.Adjust thevaluedependingonthenumberofcamera used.

•AutoStartup:Enableautomaticstartupof

DVRMainProgramuponsystemstart.

•EnableCamera: Enableordisablecamera.

Clickon“DVRMain”Icon,locatedonWindowsscreen.RefertotheInstallation andUser’sGuidefor detailedconfigurationofBGPSprogram.