The ORIGINAL just got BETTER!
NO FILTERS~NO CONSUMABLES~GREEN AND SIMPLE
Coolant cost before installation of Skimerator® unit.
Fadal VMC 40 (w/ stand-alone tank) Cost per Month Cost per Year
Initial Charge: 2 gallon concentrate @ $16.20 $32.40 -
38 gallons water @ .02 Gal. $0.76 -
Initial Charge Total $33.16 $33.16
Replacement Charge: (Replace every 2 months) $16.58 $198.96
Labor to drain, clean and refill sump. 2 Hours @ $28 (Once/2months) $28.00 $336.00
Machine Down Time: Approx. 2 hours @ $50 (Once/2months) $50.00 $600.00
Waste Disposal costs: 40 gallons - -
Contaminated coolant @ $1.25 Gal. $25.00 $300.00
Total Cost $152.74 $1468.12
*Add medical costs for treating bacterial infections, lost time, complaints of bad odors, decreased tool life, deposits on tooling and other hidden costs.
Coolant cost after installation of Skimerator® unit.
Fadal VMC 40 (w/ stand-alone tank) Cost per Month Cost per Year
Initial Charge: 2 gallon concentrate @ $16.20 $32.40 -
38 gallons water @ .02 Gal. $0.76 -
Initial Charge Total $33.16 $33.16
Labor to drain, clean and refill sump. (Once every 6 months) - -
2 Hours @ $28 ($56/6=$9.34/month) $9.34 $112.08
Machine down Time: (Once every 6 months) - -
Approx. 2 hours @ $50 ($100/6=$16.67/month) $16.67 $200.04
Waste Disposal costs: $0.00 $0.00
Coolant maintenance and tramp oil removal (1/4 hour per week @$28) $28.00 $336.00
Electricity to operate pump $3.00 $36.00
Total Cost $90.17* $717.28*
Total Savings Per Month $62.57* Per Year $750.84*
*We recommend pumping coolant from machine base tanks every four months, from stand-alone tanks once every six months and clean all contamination from the sump. The coolant can then be returned to the sump. Complete replacement is not necessary.
*Note: This chart represents the cost of replacing contaminated coolant every month compared to the cost of continuous aeration and separation of oils from coolant in a typical situation. Materials, labor, utility costs and replacement frequency will vary. The savings in your shop may be higher or lower than those shown here.
Manufactured in U.S.A. by:
HL Precision Manufacturing, Inc.
2110 Round Barn Road Champaign, IL 61821
Phone: (217)398-6881 Toll Free: (877)398-6881 Fax: (217) 398-5132
Email:
www.hlprecisionmfg.com