S2700 Heavy Duty Case Shaker

General Specifications

§  Vibrational shaker (Reciprocating elliptical motion)

§  Ability to mix gallons (cases of 4 at one time), quarts (up to 9 at one time), and a wide range of 5-gallon containers. Container dimensions from 4” to 16.5” high

§  Automatic clamping/ unclamping

§  Single button automatic start of mix cycle with automatic shutoff at end of preset time.

Footprint /Size of Unit

§  Height: 61.25”

§  Width: 27”

§  Depth: 24”

§  Weight 600 lbs

§  18” load height

Safety Features

§  Fully enclosed cabinet with clear Plexiglas door

§  Safety interlock switch (door must be closed to operate)

§  Door lock (door stays locked while unit is in use)

§  Emergency stop button, outside operating switches, and fused overload circuit.

§  NRTL / CSA & UL tested and approved and labeled for electrical safety.

§  Operating and safety instructions clearly posted on front of machine.

Technical Specifications

§  Field adjustable clamping pressure to compensate for machine wear-in and can wall strength variation. Adjustment range to have sufficient force to secure cans without crushing a typical one gallon can (33 psi).

§  Drop down front access panel for easy access to all electrical/electronic components.

§  Heavy duty square tube frame .125 wall thickness welded and bolted in critical areas.

§  Heavy-duty crankshaft with grease nipples to lubricate bearings.

§  Top mounted heavy duty suspension springs (requires no maintenance)

§  Automatic electronic timer allowing mix times up to nine minutes.

§  ¾ horsepower motor 11.8 amps @ 120V 60/ Hz. Emerson, Dayton, GE or equivalent.

§  630 RPM orbital shake speed.

§  Stainless steel loading surface and bottom plate for easy clean up.

§  Wheels on the bottom for easy installation and access.

§  Adjustable leveling feet to compensate for floor inconsistencies.

§  Exterior finish stain and scratch resistant epoxy powder coating.

Packaging and Miscellaneous

§  Unit crated to protect against transit damage by freight carrier.

§  owners manual included

§  One year labor, Two year parts warranty.

Nov, 2003