VTX-160
System Configuration
X-ray cabinet with vertically mounted imaging system and Standalone Control Console
Power Supply requirements
Single Phase supply (100 - 230 V, 8 Amp, 50/60 Hz)
Safety / Construction
Lead lined x-ray radiation cabinet, leakage shielded to less than 1 mSv/hr.
Hinged door with lead glass viewing window. Twin interlocks prevent x-ray generation and sample manipulation when the door is open.
Connector studs on front of main cabinet for ESD protection wrist straps
Source
160 kV demountable (open) x-ray tube with a 2 micron, air-cooled, transmission target.
Programmable Zodiac x-ray controller
Imaging System
Standard Dual-field 150/100mm x-ray image intensifier with aluminium input window, options for single field 100mm, or Triple field 210/150/100mm. Intensifier linked to high resolution CCD video camera.
iXS integrated image processing software installed in an integral industrial PC.
Sample Manipulator
3 axis, variable speed, programmable manipulator with detachable carbon fibre tray. Control is by manual non-contact joysticks, virtual joysticks or iXS automated routines.
Load capacity is 2kg (0.5kg with tilt and rotate unit).
Non Programmable Tilt and Rotate attachment sample holder, upgrades manipulator to 5 axes.
Limit of travel / movement each axis; X 300mm, Y 250mm, Z (Mag) 500mm.
Limit of travel Tilt and Rotate attachment ±45° tilt and 360° rotate.
Magnification
Geometric Magnification: 1200 x
System Magnification: Up to 3000 x
PC Specification
Integral PC including: Writeable CD-Rom, 100 Mb Zip Drive, 3.5 inch Floppy Disk Drive, Windows 2000 Operating System, high resolution 20” VGA colour Monitor and a Photo-quality colour Inkjet Printer option for Thermal Video Printer.
Dimensions
Overall Dimensions: Main Cabinet 1600mm L, 925mm D, 2315mm H
Control console 550mm L, 750mm D, 1200mm H
Footprint size: Main Cabinet 850mm x 850mm
Control console 470mm x 630mm
Main Cabinet Weight: (approximately) 1500 kg
Early VTX system with Side Hung control console in place of Current Stand Alone Console
Standards
All X-Tek systems comply with CE requirements, are manufactured in accordance with the Ionising Radiation Regulations 1999 (UK) and associated Code of Practice, and are rated for continuous operation in normal working environments.
Warranty
The systems offered would be covered by a full 12-month on-site warranty, and iXS software has a 24-month free upgrade and support back up.
Installation and Training
On site Installation and Operator Training (1 visit) are included within the price for systems in England.
Maintenance
X-Tek Systems can provide a comprehensive maintenance service carried out by factory trained engineers, a separate quotation is available on request.
Spare Parts & Maintenance Kit
Each system is supplied with a Spare Parts and Routine Maintenance Kit, and Operator and Maintenance Manuals.
X-Tek reserves the right to change specifications and prices without notice.