Section 3 Prequalification Response Format
I-5 Bridge Inspection – Complex Bridges
Involves the inspection of existing large viaducts and/or complex structures, in accordance with National Bridge Inspection Standards. Consultant must have experience in large viaducts (Structures >500 ft) or complex structures, inspection of fracture critical members, Non-Destructive Testing (NDT can be performed in-house or by supervision of contractor’s work).
Firm:Staff
Requirements / Instructions: List staff that meet requirements highlighting qualifications, experience, and training certificates using format in Section 4.**
Level A
Staff Level / Name / ER
Project Manager
1) PE w/ 5 years Bridge Inspection experience OR
BSCE or BSET/Civil degree w/ 10 years Bridge Inspection experience
AND
FHWA Bridge Inspection Training Course (NHI-130053 or NHI- 130055) within last 5 years↑ / 1 / 1.
Team Leader
1) PE w/ 3 years Bridge Inspection experience OR
BSCE or BSET/Civil degree w/ 5 years Bridge Inspection experience
AND
Completion of NHI-130055 (only needs to be taken once). The Basic Course (13 Day) offered by PennDOT can meet this requirement IF Pontis is included in the syllabus.
AND
FHWA Bridge Inspection Training Course (NHI-130055 or NHI-130053) within last 5 years. NJDOT will only accept NHI training for the BI Refresher course. ↑ / 2 / 1.
2.
Firm’s
Project
Requirements / Instructions: List the titles of projects that meet requirements using the format in Section 5 to report the specifics of the listed projects. Projects must have been completed in the last ten years.**
Level A / ER
One
Project Required / 1.
↑ Note: All Certificates must be attached for all staff ● If the Training Course was not taken in NJ, the Course Agenda must be Attached as well as the Certificate.
New Jersey Department of Transportation – Division of Procurement Page 2 of 2
PS13 – Jan. 2018 I-5