ACE HARDWARE CORP -- 195A107, SEVEN STAR RUST PREVENTATIVE QUICK (SUPDAT) -- 8010-00N083952
======Product Identification ======
Product ID:195A107, SEVEN STAR RUST PREVENTATIVE QUICK (SUPDAT)
MSDS Date:02/02/1996
FSC:8010
NIIN:00N083952
MSDS Number: CGRXP
=== Responsible Party ===
Company Name:ACE HARDWARE CORP
Address:21901 S CENTRAL AVE
City:MATTESON
State:IL
ZIP:60443
Country:US
Info Phone Num:708-720-0600
Emergency Phone Num:708-990-6600
CAGE:0D4B9
=== Contractor Identification ===
Company Name:ACE HARDWARE CORP
Address:21901 S CENTRAL AVE
Box:City:MATTESON
State:IL
ZIP:60443
Country:US
Phone:708-720-0600
CAGE:0D4B9
======Composition/Information on Ingredients ======
Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 27.7%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Ingred Name:NEPHELINE SYENITE
CAS:37244-96-5
Fraction by Wt: 45.3%
OSHA PEL:N/K
ACGIH TLV:5 MG/M3 (MFR)
Ingred Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 22%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Ingred Name:BARIUM SULFATE
CAS:7727-43-7
RTECS #:CR0600000
Fraction by Wt: 16.4%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Ingred Name:STODDARD SOLVENT; (MINERAL SPIRITS)
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 30.1%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Ingred Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: 1.9%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3
Ingred Name:COPPER, (PHTHALOCYANINATO(2-))-; (PHTHALO BLUE). ACGIH
TLV:10 MG/M3; 5 MG/M3 (MFR).
CAS:147-14-8
Fraction by Wt: 1.3%
OSHA PEL:N/K
ACGIH TLV:SEE INGREDIENT
Ingred Name:PERM-YELLOW; (AZO YELLOW)
CAS:6358-31-2
Fraction by Wt: 4.7%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:2-NAPHTHOL, 1-((2,4-DINITROPHENYL)AZO)-; (DINITRANILINE
ORANGE)
CAS:3468-63-1
RTECS #:QL3854000
Fraction by Wt: 2.7%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:C.I. PIGMENT GREEN 7; (PHTHALO GREEN)
CAS:1328-53-6
RTECS #:GE4300000
Fraction by Wt: 2.2%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:2-NAPHTHALENOL, 1-((4-METHYL-2-NITROPHENYL)AZO)-; (AZO RED)
CAS:2425-85-6
RTECS #:QK4247000
Fraction by Wt: 5.7%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:ETHYL ALCOHOL; (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 0.5%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM
======Hazards Identification ======
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES, SKIN AND
RESPIRATORY SYSTEM MAY OCCUR ON OVEREXPOSURE. MAY ALSO CAUSE
NERVOUS SYSTEM DEPRESSION. HEADACHE, DIZZINESS, NAUSEA AND LOSS OF
COORDINATION ARE INDICATIONS OF EXCES SIVE EXPOSURE TO VAPORS OR
SPRAY MISTS.CHRONIC:REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED
OCCUP (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CARBON BLACK:IARC MONOGRAPHS, VOL 65, PG
24-27, 1995:GROUP 2B.
Effects of Overexposure:HLTH HAZ:OVEREXPOSURE TO SOLVENTS W/PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
INHALING CONTENTS CAN BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.
======First Aid Measures ======
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE.
RESTORE BREATHING. KEEP WARM & QUIET. SKIN:WASH AFFECTED AREA
THOROUGHLY W/SOAP & WATER. EYES:FLUSH W/LARGE AMOUNTS OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION.
======Fire Fighting Measures ======
Flash Point Method:PMCC
Flash Point:105F,41C
Lower Limits:0.9%
Extinguishing Media:FOR DRY SOLIDS, USE WATER, FOAM, CO*2, DRY
CHEMICALS.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTO-IGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELECTRICAL EQUIPMENT, SPARKS & OPEN FLAME. HEAT MAY CAUSE
PRESS BUILD-UP IN CLSD CNTNRS. WATER MAY BE USED TO COOL.
======Accidental Release Measures ======
Spill Release Procedures:REMOVE SOURCES OF IGNITION. VENTILATE & REMOVE
W/INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
======Handling and Storage ======
Handling and Storage Precautions:CONTENTS ARE COMBUSTIBLE. KEEP AWAY
FROM HEAT & OPEN FLAME. USE APPRVD BONDING & GROUNDING PROCS.
TRANSFER ONLY TO APPRVD, PROPERLY MARKED CNTNRS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
======Exposure Controls/Personal Protection ======
Respiratory Protection:PROPERLY FITTED NIOSH APPROVED ORGANIC
VAPOR/PARTICULATE RESPIRATOR.
Ventilation:LOCAL EXHAUST: PREFERABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:DRYING INDUSTRIAL ENAMEL.
======Physical/Chemical Properties ======
Boiling Pt:B.P. Text:308F,153C
Vapor Density:HVR/AIR
Spec Gravity:1.32 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:COLORED PIGMENT LIQUID.
======Stability and Reactivity Data ======
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BY FIRE - CARBON DIOXIDE, CARBON
MONOXIDE.
======Disposal Considerations ======
Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS. DISPOSE OF I/A/W FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.