Research and Innovation Actions (RIA)
Innovation Actions (IA)
Coordination and Support Actions (CSA)
Call for Proposals
Partner(s) Application/Proposal Template
(Technical Section)
PART B. I
- March December 2016 -
PART B SUBMISSIONYour document submitted will be composed of 2 parts:
1. PART B.I
This part introduces the 3 first points which relate to an evaluation criterion for a full proposal. The applicant should complete all these points in order to validate his/her application.
This part is subject to a 70-page limitation, including the table templates as presented under the technical section of the present document.
2. PART B.II
This part introduces the 2 last points which relate to the members of consortium (participants, operational capacity, etc.), (potential) ethics and security issues identified by the applicant.
This part is complementary to PART B.I. The applicant should complete all these points in order to validate his/her application.
This part is not subject to any page limitation.
Please do not merge PART B.I and PART B.II as these documents should be submitted separately in the submission system.
Please follow the structure of this template when preparing your application/proposal. It has been designed to ensure that you can present your proposal in a way that will enable the JU to make an effective assessment against the evaluation and selection criteria. Paragraph 1, 2 and 3 respectively correspond to an evaluation criterion for a full proposal.
Please be aware that proposals will be evaluated as submitted, and not based on their potential if certain changes were to be made. This means that only proposals that successfully address all the required aspects will have an opportunity of being funded. The applicant’s proposal should describe the capabilities being proposed to implement the project in answer to the topic, together with a description of work to match the scope and objectives of the topic, the estimated costs and resource requirements matching the description of work, and the list and composition of the participants (if applicable). The scope of work, together with the corresponding funding to be awarded to selected applicants in the Grant Agreement will be agreed and detailed during the grant preparation and technical sessions.
Page limit: the cover page, and paragraph 1, 2 and 3, together shall not exceed 70 pages. All tables in these points must be included within this limit. The minimum font size allowed is 11 points. The page size is A4, and all margins (top, bottom, left, right) should be at least 15 mm (not including any footers or headers).
Please do not consider the page limit as a target. It is in your interest to keep your text as concise and relevant as possible. Experts evaluating your proposal rarely consider unnecessarily long proposals in a positive light.
Part B.I and Part B. II should be submitted as separate documents.
The system will not allow a proposal to be submitted until this document is uploaded.
Please note that by submitting this proposal electronically, all documents and attachments uploaded into the submission system form a legally binding part of your proposal. The documents are submitted under the applicants password controlled access and are time-stamped by the system. Therefore it is not necessary to print documents for hand signature and re-scan them before uploading. Applicants, particularly proposal coordinators, should ensure that proposal content uploaded under their password is correct because they are legally responsible for it and the proposal cannot be updated after the call deadline has passed. It is recommended that documents be converted directly from editable to PDF versions to optimise quality and file size rather than scan printed versions.
COVER PAGE
Title of Proposal
List of applicants
Applicant No * / Participant Organisation Name / Country1 (Coordinator)
2
3
* Please use the same participant numbering as the one used in the administrative proposal forms.
Table of Contents
Foreword
This template is provided to applicants in order to guide and assist them in the submission of proposals in the Call for Proposals.
Before submitting a proposal, applicants should check their eligibility, admissibility and all general conditions to be met and provide all necessary elements required in the proposal submission process. More information can be found in the following documents:
1. Eligibility, admissibility and special conditions: described in parts B and C of the General Annexes of the Work Plan as published on the JU website and on the Participant Portal.
2. Evaluation criteria, scoring and threshold: The criteria, scoring and threshold are described in part F of the General Annexes of the Work Plan.
3. Evaluation procedure: The procedure for setting a priority order for applications with the same score is given in part F of the General Annexes to the Work Plan.
The full evaluation procedure is described in the Rules for submission, evaluation, selection, award and review procedures for Calls for Proposals as published on the JU website[1] and on the Participant Portal of the European Commission[2].
1. Excellence
Your proposal must address a topic for this Call for Proposals.
The Topic descriptions for Partners are set out in the Work Plan applicable and further detailed in the relevant Annex depicting the list and full description of topics; andalso available as Call document “Full and Formal Description of Topics” on the Participant Portal.and further detailed in the Annex III – 4th Call for Proposals (CFP04): List and full description of Topics.
This section of your proposal will be assessed only to the extent that it is relevant to that topic.
1.1 Objectives
· Describe the specific objectives for the project[3], which should be clear, measurable, realistic and achievable within the duration of the project. Objectives should be consistent with the expected exploitation and impact of the project (see section 2 “Impact”).
1.2 Relation to the Work Plan
· Indicate the topic to which your proposal relates, and explain how your proposal addresses the specific challenge(s) and scope of that topic, as set out in the Work Plan.
The description of the overall Clean Sky 2 Programme is the “Joint Technical Programme[4] which may be consulted by the applicants to clarify the context of the topics within the overall strategic objectives of the Programme and the relevant IADP/ITD area(s).
1.3 Concept and approach
· Describe and explain the overall concept underpinning the project. Describe the main ideas, models or assumptions involved. Identify any trans-disciplinary considerations;
· Describe the positioning of the project e.g. where it is situated in the spectrum from idea to demonstration. Refer to Technology Readiness Levels where relevant. (See also General Annex E of the work planGeneral Annex E of the work plan);
· Describe any national or international research and innovation activities which will be linked with the project, especially where the outputs from these will feed into the project.
· Describe and explain the overall approach and methodology and justify the credibility of the proposed approach;
· Explain how the technologies, the approaches and the solutions proposed are suitable with respect to the topic description and the IADP/ITD area and objectives;
· Where relevant, describe how gender equality is taken into account in the project’s content.
For guidance on methods of gender equality please refer to http://ec.europa.eu/research/science-society/gendered-innovations/index_en.cfm
1.4 Ambition
· Describe the advances your proposal would provide beyond the state-of-the-art, and the extent to which the proposed work is ambitious and innovative. Your answer could refer to the ground-breaking nature of the concepts involved, the approaches and methods proposed, and the issues and problems to be addressed.
· Describe the innovation potential which the proposal represents. Where relevant, refer to products and services already available on the market. Please refer to the results of any patent search carried out.
2. Impact
2.1 Expected Impact
Please be specific, and provide only information that applies to the proposal and its objectives. Wherever possible, use quantified indicators and targets.
· Describe how your project will contribute to:
o the expected impacts set out in the work plan, under the relevant topic;
o improving innovation capacity and the integration of new knowledge;
o strengthening the European competitiveness of the sector and creating potential for growth by developing innovations meeting the needs of the European and global markets; and, where relevant, by maturing such innovations to a point where they would be viable for development;
o any other environmental and societal impacts (if not already covered above)
2.2 Measures to maximise impact
2.2.1 Dissemination and exploitation of results
· Provide a plan for the dissemination and exploitation of the project's results (unless the topic explicitly states that such a plan is not required).
· Describe where the core research activities will be carried out and how they will impact and benefit the competitiveness of Europe and Associated countries.
· Describe a credible path to deliver the innovations to the market. The plan, which should be proportionate to the scale of the project, should contain measures to be implemented both during and after the project.
Dissemination and exploitation measures should address the full range of potential users and uses including research, commercial, investment, social, environmental, policy making, setting standards, skills and educational training.
The approach to innovation should be as comprehensive as possible, and must be tailored to the specific technical, market and organisational issues to be addressed.
· Explain how the proposed measures will help to achieve the expected impact of the project. Include a business plan where relevant.
· Where relevant, include information on how the participant(s) will manage the research data generated and/or collected during the project, in particular addressing the following issues:[5]
o What types of data will the project generate/collect?
o What standards will be used?
o How will this data be exploited and/or shared/made accessible for verification and re-use? If data cannot be made available, explain why.
o How will this data be curated and preserved?
Upon selection, as part of the grant preparation stage you will need to accede to the relevant IADP/ITD consortium agreement or implementation agreement (if applicable)[6] which will contain among other things how to manage the ownership and access to key knowledge (IPR, data etc.) in accordance with the terms of the Grant Agreement for Partners[7]. Where relevant, these will allow you, collectively and individually, to pursue market opportunities arising from the project's results within the IADP/ITD Programme.
The appropriate structure of the consortium to support exploitation is addressed in section 3.3.
2.2.2 Communication activities
· Describe the proposed communication measures for promoting the project and its findings during the period of the grant. Measures should be proportionate to the scale of the project, with clear objectives. They should be tailored to the needs of various audiences, including groups beyond the project's own community. Where relevant, include measures for public/societal engagement on issues related to the project.
3. Implementation
3.1 Description of work — Work packages, deliverables and milestones
Please provide the following:
· brief presentation of the overall structure of the description of work
· timing of the different work packages and their components (Gantt chart or similar)
· detailed work description, i.e.:
o a description of each work package (table 3.1a);
o a list of work packages (table 3.1b);
o a list of major deliverables (table 3.1c);
· graphical presentation of the components showing how they inter-relate (Pert chart or similar) both between themselves and with the WBS of the ITD/IADP (where possible and relevant)
Give full details and explain the consistency between the proposed activities and the background, key capabilities, skills and competences as described. Base your account on the logical structure of the project and the stages in which it is to be carried out. Include details of the resources to be allocated to each work package to show evidence of the appropriateness and efficiency of the allocation of tasks and resources.
The number of work packages, deliverables and milestones should be proportionate to the scale and complexity of the project.
You should give enough detail in each work package to justify the proposed resources and budget to be allocated and also quantified information to allow its evaluation and that progress can be monitored including the monitoring carried out by the CSJU as part of its Programme Management process.
You are requested to include a distinct work package on ‘management’ (see section 3.2) and to give due visibility in the description of work to ‘dissemination and exploitation’ and ‘communication activities’, either with distinct tasks or distinct work packages.
Definitions:
‘Work package’ means a major sub-division of the proposed project (i.e. Level 1 Work Package).
‘Deliverable’ means a distinct output of the project, meaningful in terms of the project's overall objectives and constituted by a report, a document, a technical diagram, a hardware, software etc.
‘Milestone’ means a control point in the project that helps to chart progress. A milestone may correspond to the completion of a key deliverable, allowing to test progress and to allow the next phase of the work to begin. These will apply at intermediary stages of the project implementation so that, if problems have arisen, corrective measures can be taken. A milestone may be a critical decision point in the project where, for example, the ITD/IADP consortium must decide which of several technologies to adopt for further development.
3.2 Management Structure and Procedures:
3.2.1 Capabilities
· Describe the ability to:
o manage the activities under the topic;
o ability to work effectively within a supply chain and into an equal or higher tier industrial organization
3.2.2 Structure and procedures
· Describe the organisational structure and the decision-making (including a list of milestones (table 3.2a))
· Explain why the organisational structure and decision-making mechanisms are appropriate to the complexity and scale of the project;
· Describe, where relevant, how effective innovation management will be addressed in the management structure and description of work.
- Innovation management is a process which requires an understanding of both market and technical problems, with a goal of successfully implementing appropriate creative ideas. A new or improved product, service or process is its typical output. It also allows an applicant to respond to an external or internal opportunity.
3.2.3 Risks